AEM’s external Peak & Hold Injector Driver module allows ECU’s that have a saturated injector drive circuit to trigger low impedance injectors with a true 4/1 Peak & Hold injector drive circuit. AEM’s Peak & Hold Injector Driver contains 10 independent injector drive channels. Each channel supplies full battery voltage to a fuel injector for rapid current rise, in order to produce positive injector opening. When load current reaches 4.1A (amps), the injector driver reduces the load current to 1.1A and operates as a constant current source. This condition holds the injector open, and reduces system power dissipation. If the current fails to reach 4.1A within 5mS, the driver module automatically reduces the load current to 1.1A. Installation is straightforward. Users simply hook the injector trigger wires from an ECU to the module, and then hook the output wires from the module to your injectors. Any number of channels can be used from one to 10. For high-output engines that have exceeded the capacity of high-impedance injectors Includes 10 independent injector drive channels for any engine up to V10 Complete wiring system included Operating Voltage: 8-18 volts, negative ground RPM Capability: Unlimited Injector Triggers: 10 Trigger Waveform: Output is activated when input trigger is grounded Trigger Impedance: 220 Ohm input impedance, pulled to 12V (60 mA draw) Injector Outputs: 10 Output Current High: 4.15A Peak, Typical Output Current Low: 1.15A Sustain, Typical Peak Current Timeout: 5mS Size: 5.5"L x 4.6"W x 1.4"H Weight: 2.7 Lbs Over Temperature Shutdown: 115C (Nominal)

Do you have more pictures of the AEM Peak & Hold Injector Driver installed on your car? Email: webmaster@clubrsx.com and we will add it here. We may not be able to use all of your pictures. The above picture(s) might be for reference only and may not represent the actual product ordered.

Customer Reviews Write an online review and share your thoughts with others. Average Customer Review: Not yet rated

There are no reviews

Did you do a step-by-step install on our message board? Do you have a link to the manufacturers instructions? Email: webmaster@clubrsx.com and we will add it here.

To have Club RSX price match the AEM Peak & Hold Injector Driver, please email: pricematch@clubrsx.com or call (866) CLUB-RSX.

Club RSX's Price Match Policy
Whenever possible Club RSX will price match the advertised total price (price including all shipping and handling charges) from any legitimate retailer. The price must be listed in a magazine, newspaper, or listed on an open to the public website. Club RSX will not price match items listed on any auction based website; as they are often not legitimate retailers. We will also not price match special group discounts or sale prices. We will verify all of the information before matching the price. Most of the time, if the price is legitimate, Club RSX will adjust our pricing so that every one of our customers can benefit!

Club RSX.com's free shipping applies to every order*, there is no minimum purchase and there are no handling fees added to your order. We feel this allows you to purchase when you want and not have to wait to order a lot of items at once to save on shipping costs. At Club RSX.com the price that you see is the price that you pay each and every time. Alaska, Hawaii, and international orders are extra and not included in the free shipping offer.

*Alaska, Hawaii, and International Shipments
Along with Alaska and Hawaii, Club RSX will ship to most country's in the world. To get a shipping quote, all that you need to do is add the items that you would like to purchase to your basket and follow the check out steps. Once you reach the shipping and payment screen that will give you both your shipping costs and payment options. Club RSX uses Global EMS (US Mail) and/or UPS to ship internationally. Some items that we sell are too large to be shipped using Global EMS so UPS would be your only option.

Do you have a question about AEM Peak & Hold Injector Driver? We have two different ways for you to contact us so that we can answer your questions.

Phone: (866) CLUB-RSX (866-258-2779) - Mon to Fri 10am to 5pm Mountain Standard
Email: sales@clubrsx.com