Innovative Engine Mount Kit 60A (Street) Rating: 5 out of 55 out of 55 out of 55 out of 55 out of 5
Innovative Engine Mount Kit 60A (Street)


Send us your pictures of Innovative Engine Mount Kit 60A (Street)




Bookmark and Share

Price:  $269.99
Includes Free Ground Shipping!*

Availability: 4 In Stock

Product Specs 
Part Number: INN-90650-60A
Manufacturer: Innovative Mounts
Color: Red
Engine Mount Type: Steel
Engine Mount Hardness: 60A
Fitment Information 
Acura RSX 02-04 RSX Type-S
05-06 RSX Type-S
02-04 RSX: 5-Speed
05-06 RSX: 5-Speed
Honda Civic 02-03 Civic Si
04-05 Civic Si


    Comes with rear, driver, and passenger motor mounts. It does not include the front mount.

    Quality, Precision, and Performance are the key factors we strive for at Innovative. So much so that we offer a lifetime warranty on all of our mount kits. Our kits are easy to install, fitment is amazing, and vibration transmitted to the chassis is almost non existent with our unique ploy-urethane formula and design.

    Factory mounts are usually made of thin gauge metal stamped and partially inserted with a rubber material. The rubber usually has two or more sections that meet in the center to hold the center pin. These sections do not hold the motor firmly and are prone to break under severe driving conditions and/or when used in performance applications.

    Innovative Mounts has engineered a unique polyurethane bushing unlike no other. Our bushings are solid, will never wear or break, and come with a life time unconditional warranty. A key design decision in our bushings is that it makes minimal physical contact with the mounting bracket or chassis. The shape of the urethane bushing is tapered to prevent binding between the chassis and/or mounting bracket. This allows the urethane to gradually absorb engine movement and vibration.

    The 60A Red bushings are recommended for street cars. Most of our kits come standard with these bushings. They provide the least amount of vibration transfered from the engine to the chassis. This equates to a more comfortable everyday ride.

    The 75A are recommend for street and track vehicles that make more than average horsepower. This rating of bushing is also for those that would like a stiffer feel and less engine flex.

    The 85A Grey bushings designed specifically for race cars or drivers that seek a solid engine mount kit.
Sorry, we do not have any instructions for this product at this time.

Did you do a step-by-step install on our message board? Do you have a link to the manufacturers instructions? Email: webmaster@clubrsx.com and we will add it here.
Customer Reviews
Write an online review and share your thoughts with others.

Average Customer Review: 5 out of 55 out of 55 out of 55 out of 55 out of 5 25 Reviews

5 out of 55 out of 55 out of 55 out of 55 out of 5 Amazing quality and great performance, 3.10.2010
Reviewer: Jon (Sunrise, FL)
I bought my mounts awhile back and just got to installing them today. They are perfect! Cars running so hard now, no wheel hop and I guess I am of a small percentage of lucky few who can say that I have absolutely no interior rattles after install. Vibrations are normal and fine, my vibrations where actually worse before I installed the new mounts, 3 months of driving with 3 cracked mounts. Definitely buy these mounts if looking for good quality.

5 out of 55 out of 55 out of 55 out of 55 out of 5 Shaky Review, 11.29.2009
Reviewer: Chris, 03 RSX Type S I/H/E/MM/Buddy Club Suspension (Saint George, UT)
I say shaky, because I purchased these a few months back, and despite what I read in the forums about the vibrations and rattles getting weaker with age, mine seem to stay the same, if not intensify. I love the performance gains I saw through them, which was the elimination of torque steer and wheel hop, but not happy with how much they rattle the car. All in all, if you are wanting the comfort of a daily driver out of your acura, don't get this. If you want the raw performance gains, then this is a great mod.

5 out of 55 out of 55 out of 55 out of 55 out of 5 good, 10.31.2009
Reviewer: juliocalderon (gaithersburg, md)
they were kind of difficult to get out and put into place not beginners thing to do but yep....... shakes a lot i put them on like 2 weeks ago and the vibration has settled a bit but it is still there... I advise not to buy if you dont like vibrations ,, but for me i dont mind the cons cause the pros for me out weight them .... started a real race from a dig 3 times it was good significant decrease in wheel hop

5 out of 55 out of 55 out of 55 out of 55 out of 5 Great Mounts,, 8.5.2009
Reviewer: David (Brentwood, CA)
After installing the 60A mounts (plus front mount) my motor is very secured. I feel like they were worth every penny I paid for them. Pros: -Better traction (Better 0-60 :D) -Less Wheel Hop -Secured engine (I can relax knowing that my 106k mile motor is more secured) - I can hear my engine better inside the car. Cons: -Not an installation for beginners. -Too much vibration after the mounts are first put in. (I'm sure they will loosen up after more time) 5 Stars because the mounts did exactly what they were designed to do. If you drive your RSX daily i beg you not to go over the 60A mounts. I'm very happy with the results and I'd recommend these to everybody looking for the same results. Increasing traction and HP utilization are very important factors when upgrading your RSX. Got any questions? Email me Or find my car on cardomain... http://www.cardomain.com/ride/3337856

4 out of 54 out of 54 out of 54 out of 54 out of 5 innovative mm, 5.3.2009
Reviewer: apb247 (phx, AZ)
I have had the 60a's on for a few weeks. they look great and are solid. minimal vibs but over all not to bad.

View all 25 reviews

Do you have a question about Innovative Engine Mount Kit 60A (Street)? We have two different ways for you to contact us so that we can answer your questions.

Phone: (719) 282-9887 - Mon to Fri 10am to 5pm Mountain Standard
Email: sales@clubrsx.com
To have Club RSX price match the Innovative Engine Mount Kit 60A (Street), please email: pricematch@clubrsx.com.

Club RSX's Price Match Policy
Whenever possible Club RSX will price match the advertised total price (price including all shipping and handling charges) from any legitimate retailer. The price must be listed in a magazine, newspaper, or listed on an open to the public website. Club RSX will not price match items listed on any auction based website; as they are often not legitimate retailers. We will also not price match special group discounts or sale prices. We will verify all of the information before matching the price. Most of the time, if the price is legitimate, Club RSX will adjust our pricing so that every one of our customers can benefit!
Club RSX.com's free shipping applies to every order*, there is no minimum purchase and there are no handling fees added to your order. We feel this allows you to purchase when you want and not have to wait to order a lot of items at once to save on shipping costs. At Club RSX.com the price that you see is the price that you pay each and every time. Alaska, Hawaii, and international orders are extra and not included in the free shipping offer.

*Alaska, Hawaii, and International Shipments
Along with Alaska and Hawaii, Club RSX will ship to most country's in the world. Club RSX uses Global EMS (US Mail) and/or UPS to ship internationally. Some items that we sell are too large to be shipped using Global EMS so UPS would be your only option. To check the shipping on this item, just add the item to your basket and click on the Calculate Shipping button.
Customers Also Bought
Innovative Front Engine Mount 60A (Street)
Innovative Front Engine Mount 60A (Street)
$115.00

ClubRSX O2 Sensor Extension
ClubRSX O2 Sensor Extension
$23.00

Ingalls Engine Damper: 02-06 RSX (Base) & 02-04 RSX Type-S
Ingalls Engine Damper: 02-06 RSX (Base) & 02-04 RSX Type-S
$140.00

Customer Service Shop Club RSX My Account About Us Message Board Tech Info