Search Results for ‘2006’

Where can I find a driver side lower control arm for my car I've tried all the auto parts like o Reillys , auto zone . advance and auto plus even online like carparts.com and nun of them work. also ima need both lower ball joints as well everything else suspension wise I've already fixed before...

Gonna TRY to keep it simple. I'm guessing a grounding issue but..... • Passenger high beam headlight wasn't working. • Pulled light, looked good & voltage meter ohms showed good • Checked power from connector = voltage meter moved - but just barely. • Looked at wiring, no obvious...

So my passenger side on my 2006 Base Model is pretty clapped from somebody T - Boning me. In the attached pictures you can see the damage to the door & quarter panel. The fender is rusting because I bought it unpainted & got hit right before I was gonna get the car painted. Anyway, somebody is...

Imgur Gallery: $6,000 OBO 91k miles Very clean condition Mechanic owned Owner's manual & window sticker included Garage kept its whole life No accidents Only a small dot on the driver's side quarter panel Minor cosmetic imperfections on the exterior Serviced at McGrath acura all its life by...

I am just starting to get into cars and my friend recommended this website to me for help with any questions I may have. any suggestions for nice wheels in the midway price range? quality brands? please upload pics too if any, I would love to see. Thanks!

Has anyone had success finding correct size ball joints for an 05-06 other than the Buddy Club extended?? I'm just discovering this stupid issue. OR are the 02-04 ball joints actually a different size?

Hi All, I am the original owner of this 2006 ACURA RSX Type S with ~120,000 miles. This car is in great condition and I would like to sell it to someone that is passionate about the vehicle and make. This car is ALL ORIGINAL with no after-market modifications or alterations. Regularly serviced...

Has anyone safely run 2006-2008 k24a2 cams with 50* vtc gear in a stock k20? Im shooting for 10k rpm I couldn't find a clear answer anywhere

I have a pair of tail Lights for sale off of a 2006 acura RSX I'm looking to get about $125. They do have a small amounts of water damage but they look pretty clean and given a little bit of time and effort they could be completely cleaned up. Send me a pm if intrested

Just picked up my car about a month ago and it's got good potential.! I did have a few problems come up however, I have a trouble code p0137 for bank 1 sensor 2 low voltage, I replaced the Oxygen sensor and checked for exhaust leaks, the exhaust system seems to be fine. If anyone has any tips or...

In my 06 Type-S I’m hitting the gas light at around 220 miles on a full tank while driving economically. I’m posting the list of mods I have on the car that I think would affect MPG and I just wanted your guy’s input on why it might be so crappy. My assumption is that it’s my AEM Short Ram...

I've tried searching for a solution to some problems but no luck...was hoping someone could help out. A. So lately my key gets stuck and will out release I unless move the car forward and reverse a few times...if lucky only once. B. When I move from "P" to "D" or any other position, I hear...

Parting out an 06 RSX TYPE S willing to ship

Hey all, We had our first 90 degree day today. Since I bought the car in February, I tested the AC in 70 degree weather for a few minutes, and it seemed to work. However, I have noticed a couple of issues with the cooling system. 1. Sunday, I ended up getting caught at the store in a...

In the middle of putting my car back to stock to sell, and some of my parts I kept over the years grew legs. So I need to find replacements. I am in the KC area and would prefer from somewhere close to there unless we can work something out on shipping. THANKS IN ADVANCE Need the following...

Hello everybody. I bought this car back in July actually, got it with 85k miles on it. However I’m just getting on the forum. I bought the car as it is right now, boltons with a minor tune: N/A AEM Cold air intake, vibrant race header, 2.5” catback exhaust, motor mount upgrades, and a short...

This car has been an absolute royal headache for some time now. Anyways, it’s a 2006 type S. K20A2 bottom end with the K20Z1 head. I rebuilt the motor with all the main ‘wear’ components (rings, main bearings, rod bearings, valve stem seals, gaskets, etc, etc,etc.). Anyways, day number one of...

EVERYTHING interior and exterior is for sale Greddy exhaust and Headers Hondata Stand-alone ecu Buddyclub short shifter Injen cold air intake K20z1 with 130,000 miles And everything else is stock. Will be willing to ship most stuff just need to figure out how.

I have a 2006 RSX-S that I bought a while ago with an overheated engine. Well, everything was warped from the previous owner continuing to drive it as it overheated, so I just kept some of the bolt ons and junked the old motor. I came across a K20A2 bottom and and a K20Z1 top end, separately...

I have a 2006 RSX-S. I bought the car with the factory motor, which was all sorts of messed up from the previous owner continuing to run it even though is was overheating. I pulled that motor out, kept some of the bolt-ons, and I scrapped the rest of it. I found a complete disassembled K20A2...