Acura RSX, ILX and Honda EP3 Forum banner

60ft

  1. 1/4 Drag Racing RSX
    I don't drag too much but with my autocross setup, a worn motor, and 17x8 225/45 star specs, I just hit a 2.160 60ft ([email protected]) and I'm feeling pretty good about it. What are some of your street tire 60ft times so I can see where I stack up:beerchug: Also ran a 13.93 but that was a 2.18...
  2. 1/4 Drag Racing RSX
    The KMOD RSX has run as fast as [email protected] Our best 60ft to date was a 1.66. On the 12.19 pass the 60ft was a 1.78 We really want that 11sec pass, & we are wondering if 1.5x 60fts are unheard of in a heavy body car like our RSX. With a 1.5x 60ft we a garunteed an 11sec pass. We are...
  3. Turbo RSX
    I thought i'd start a thread where we can share the 60ft and keep track of them. If you have a slip, even better, POST THEM UP!
  4. 1/4 Drag Racing RSX
    well i went to the track last night with no intentions to run due to my factory michellins having like 4/32nds of tread dephth and a small portion of one tire sidewall starting to separate on the inside. (getting bfg gforce sports put on today) I saw the line didnt exist so I said fuck it im...
  5. Motorcycles
    Took a few pics when we went out riding today. Top of lip to landing was approx. 60-65ft. Just a fun little jump :thumbsup:
  6. 1/4 Drag Racing RSX
    1/8 mile yesterday at Qualcomm in San Diego I ran a 9.759 ET and 2.358 60ft. I was so happy b/c by best before was 9.9 and 2.5?? I can probably pull a 2.1.-2.2 on way better tires than stocks. I just thought I share that, I know launching sucks at qualcomm. first run: .519 rt 2.865...
  7. ECU Tuning RSX
    I've have a G-Tech Pro SS for afew months now and I was just wondering how those of you that have the SS or RR 60 ft times are compairing to your track times. I've never been to the track with any of my cars, but am plannig on getting out there soon this year. I've always thought I launched...
  8. 1/4 Drag Racing RSX
    man my 60ft, sucks soooo bad.... its always constantly a 2.4-2.5 any tips? im still on stocks :dontknow:
  9. 1/4 Drag Racing RSX
    Went to the track on sunday. Best time was a 13.982. 60 ft was 2.051. My time should be doing a little better. I had one really good 60 ft it was 1.994 on the hoosier drag radial prototypes but my time was really bad a 14.375 because it didn't go into second gear.
  10. 1/4 Drag Racing RSX
    Whats the best 60ft times you've seen with the following tires?...im looking at buying some 225/45/17 for my 17's and cant decide which tire to go with, so i figure by knowing what the best 60ft i could attain i would narrow down my selection 1. yoko es100's 2. falken azenis sport 3. kumho...
  11. 1/4 Drag Racing RSX
    Hey idk to much about stock times but i recently did 14.523 at the track and all i have is a cai and mms. I have the new kumho ecsta ASX tires and my best 60 of the night was 2.20 i did a 2.28 also. Now i was wondering if thats a very good time for the mods i have. No weight reduction either...
  12. 1/4 Drag Racing RSX
    [email protected] 2.005 60ft Yep Yep! [email protected] with a 2.005 60ft. Did that on falken azeni's. I'm not sure why the mph was so low, it must have been from my60ft. The timeslip is in my sig along with my mods. I have vid's from a camera that I mounted inside my car, if anyone can host them let me...
  13. 1/4 Drag Racing RSX
    Hey i need help on my 60ft! i have no idea why im getting such bad times... i think its mainly my launch but any advice will do! thanks guys! :shakehead
  14. 1/4 Drag Racing RSX
    i gotta work on my 60ft (2.4 sucks my ass). So I found a nice stretch of road with no traffic and revved to 6,500. I let half way off of the clutch and my driver's side tire lit up and then my LSD kicked in. I held the clutch 3/4 of the way for a sec and then let totally off. I thought it was...
  15. 1/4 Drag Racing RSX
    lsd and slicks i'm told could net me this time easily. if u could pull off a 1.8xx 60ft, what would your ET be assuming that you are pulling low 14s and trapping at around 99-101mph?
  16. 1/4 Drag Racing RSX
    is it possible without an LSD? i know 2.1XX is really pushing it already..
  17. 1/4 Drag Racing RSX
    Greetings... I've had my RSX-S for 3 months now and I still have yet to run better than a 2.3xx 60ft. I normally slip/feather it around 3200-3600rpm and end up getting moderate wheel spin. My wheels are stock and I switched to Falken Azenis Sport. What is everyones suggestion to get into the...
  18. 1/4 Drag Racing RSX
    ok i went to the track today, and didnt do as well i planned, but that was a given as it was hot as balls out and humid. bah! i hate summer and hot weather! :firemad: 14.6's for my base will have to wait till fall or when it gets cooler. it will give me some time to do more mods :thumbsup...
  19. 1/4 Drag Racing RSX
    here's the slips from my fastest ET in the RSX and my fastest 60ft time ever in any car on street tires!!!!!!! I WORE THE NUMBERS 121 TONIGHT!
  20. 1/4 Drag Racing RSX
    I just want to see if anyone has got the perfect launch yet? Also make note of what tires you were using. My best was 2.27 and it felt so sweet. (Pirellis in sig) My average is 2.31-2.33 though. I hope to make that 2.27 consistent with some new rubber.
Top