Acura RSX, ILX and Honda EP3 Forum banner
89mm
1-12 of 12 Results
  1. Engine & Transmission RSX
    Used but Fresh ERL DOT (New from Honda) block, 88mm bore, fresh deck and hone, comes with timing cover and chain guides $1200 shipped Drag Cartel 4.5 cams BNIB Intake: 14.8 mm Lift /.284 Duration @ .050 Exhaust:13.7 mm Lift/.276 Duration @ .050 SOLD Carrillo Pro H K24 rods with CARR...
  2. Engine & Transmission RSX
    Used set of CP pistons from k20a 9.0:1 pistons have not been polished but but still looks and works great. comes with everything in box that it originally came with from crsx asking 200 shipped obo [PRICE DROP] NEED TO GET RID OF THESE http://www.clubrsx.com/cr/CPPB-SC70404.html
  3. Engine & Transmission RSX
    Edit.
  4. Engine & Transmission RSX
    I know it's long but read me: Okay.. I'm seeing if there will be a lucky buyer for my short block.. this short block is foreal FULLY BUILT Sleeved 2.5l K24a2 all motor basically "k25" block. Things done to the block: -M1 Abrams Sleeves bored out to 89mm done locally by John Day himself from...
  5. Engine & Transmission RSX
    I'm selling a sleeved block with wiseco pistons 89mm. This is a perfect block for a race set up. I just needed to go down in piston size hence a new block. The Pistons are bran spanking new. Starting at $1000. If you need more info let me know. e-mail: [email protected]
  6. Engine & Transmission RSX
    Like that title says I have a BNIB 89mm Bore Wiseco 12.5:1 cr Pistons forsale. I was originally going to use this for my build but change of plans because I'm running this for a daily and my block was decked a whopping .006 which will raise my cr too high for 93 octane so I have to sell them...
  7. Engine & Transmission RSX
    13.7 cr 89mm wisecos with rings asking $450 $420 shipped & paypal'd. I was going to send these to Endyn to be worked over (reduce cr & slightly deepen the valve reliefs) but never did... the option is there to get 12.5-13.7 cr tho
  8. General RSX Discussion
    Im replacing my head gaskets, but the irony is, of all reason, i never got the chance to know the differences. The thickness required is .30mls, but im looking at rsxstore.com, and of course our beloved clubrsx.com, Cometic gaskets are offered as .30mls as thickness (Factory standard) but it...
  9. All Motor RSX
    BIG THANK YOU TO Dennis at www.HYBRIDYNAMICS.com for letting us do around 50 runs in a couple hours, his insight and his very good attitude. I highly recommend his shop for dyno sessions. His rate are also very good! :up: Ron for the sickest K series cams and pistons on the market :up: IPS...
  10. Turbo RSX
    These are pics of our newly assembled turbo development short block. It features Darton sleeves, machined and installed by Benson's. The pistons are our 89mm, Tbone coated JE customs mated with 6.250" Cunningham rods and .200" wall Western Wristpins. The 86mm K20A(2) crank has been modified and...
  11. Turbo RSX
    These pistons were made specifically for our 2188cc K-series testbed to withstand anything we could throw at it. I told them make it as bulletproof as possible. Features consist of: - Anti-detonation buffer zone (lateral grooves above the top ring) - Spherical dish (centrally focuses...
  12. All Motor RSX
    These are ERL Performance Inc.'s K24 Superdeck blocks in 89mm and 90mm bores. They are brand new blocks from Honda with zero miles on them. Darton sleeves are used exclusively by ERL and installed in a very unique approach that integrates their "Superdeck" in a patent-pending process...
1-12 of 12 Results
Top