Currently on my 02 type-s I have an injen CAI, borla catback, and the Megan racing downpipe/testpipe but the car is still a little quiet for my taste. I’m thinking of spending a few extra bucks and getting the Megan shorty header to go along with the downpipe instead of getting a long tube...

Debating on possibly adding a LSD to my K20a3 transmission, currently a little over 100k mainly because the transmission is out as I'm doing the clutch/flywheel and I'm not entirely sure it's worth it for just daily driving but I'm researching just to cover my bases. I run 225/45/17 Toyo...

I have a 2003 Base RSX with a GruppeM air intake, mentioned to one of the younger guys when I had the air intake installed that I was thinking of adding a HKS Hi Power exhaust due to loving the sound from what I've heard and he warned me to be careful because he's seen people add an air intake...

First of all thank you for taking the time to read this DIY. As a student it is hard gathering the coin to work on my car which results in going down a bad path of purchasing Chinese replicas and knock offs *GASP!* I have discovered though with a little time and effort it is not difficult to...

My current setup : 05 Type S, JRSC w/ 3.0 pulley, Apexi exhaust w/ DCRH, Injen CAI, esmm and ingals torque damper, ID 1000cc, jmercado auto-tensioner bracket. I was dyno-tuned by KMOD, made 300 whp and 197wtq. So, I am going to change out my k20z1 crank pulley for the k20a2 crank pulley, which...

Hello Everyone, Would like to start by saying I'm not sure if this is the forum where this question belongs, if not I would appreciate the mods moving it to the appropriate one. I have a base model '02 RSX and discovered post sale that it does not have cruise control. I was wondering if...

Is it possible to add photos off of my iPhone directly onto the forum? Thanks

Hey guys, I know none of these "mods" really add any hp or tq or any performance really, but aside from "hp gains" are these "mods" worth it? I have read through the base model mod thread and saw a few people mention the Buddy Club Racing Spec Condenser (grounding kit/voltage equalizer). I...

Have a Race Supercharger getting installed on my 04 RSX Type S, have the EP3 plugs for my stock motor. What plugs do I need for the S/C???? Thanks for your response... Jimmy

Hey guys, So I have been lurking around the posts here and I am becoming very interested in adding a 6th gear to my EP3. I have heard it is relatively inexpensive compared to a full swap, but can anyone tell me the exact parts I will need and what I should expect to have to change to make it...

Would it be fine to add an RBC without getting a retune on my K20a2? What could I expect in terms of reliability until I get funds to upgrade cams and retune?

Hey guys. I wanna know your opinion. I have a k24a2 turbo. Here is my set up. Log mani, precision 5031, tial wastegate 8 psi spring,greddy from mount, greddy rs bov, precision 1000's with a salvor 255/no return. Here's my problem. I took car to get dyno tuned. Tuner disabled vtec and tuned to...

I'll be swapping my engine this weekend so im going to build my Hybird tranny!! It will be ep3 case, rsx type s 1-5,type s 4.7 FD and fg2 6th .659 same as tsx, I'll take pictures and list everything that's needed to swap 6th gear in ep3 trans! Since there is no diffint answer that I've found...

Hello all I've recently acquired an s2000 and was surprised to find it has 2 speakers lol the later ones have 8 but apparently the 2000 came with 2 in the front and thats it. Ive picked up some mounts and some polk 5-1/4" speakers that mount behind the seats. My question is how do i wire them in...

I already have a full fuel system setup, so if you havent added that already you can look at the other DIY's for doing a feed and return setup. Here are two you can use: Robry's full system DIY http://forums.clubrsx.com/showthread.php?t=666593&highlight=Fuel+return+system Spaz's Add return...

ok first off im new to the whole rsx thing....i came from a boosted car which had 320hp 330tq..so from that to the rsx i feel a big difference lol but my question is what mods/add ons should i add to my rsx next....i dont wanna boost looking to be all motor with out jumping into the...

When I got my Eclipse HU installed, I was wondering how the installers tapped into the Front and Rear speakers to amplify them. Is the basic setup, plugging the stock audio wiring harness into the head unit, and then you tap into the HU's interconnecting wires to the corresponding speaker, and...

Just added: 3 pairs of TL Bi-xenon Projectors - $200.00 each set, not including housing. A single unit ballast and bulb - TL D2S. In working order. Asking $95.00 SOLD OEM FX35 Bi-xenon Projectors - $160.00 OEM XF53 HIDs and Bulbs (both). One of the HID units does not work properly -...

Trying to figure this out...... Installed Buddy Club RSD coilovers and had huge toe out with very little negative camber. Was able to fix the toe to get it straight. Now if I add a couple degrees of negative camber is that going to toe in my wheels meaning I will have the adjustibility to toe...