Acura RSX, ILX and Honda EP3 Forum banner

adjusting

  1. Suspension, Chassis & Brakes
    Hey all, I was wondering for those who have adjusted thier subframe for more caster, how much more degrees of caster was gained? I'm looking to do the same to equalize my caster and maybe gain some more so input is appreciated. Thanks!
  2. ECU Tuning RSX
    Hello all, So here's the situation. My car was tuned by Magnesium and it was running well for the first four months or so. Then it started exhibiting problems; stumbling idle, off-throttle surging and finally a misfire on #2. I went through all the troubleshooting steps and it seemed to...
  3. Transmission & Drive Train RSX
    Hello I am wondering if there is a way to adjust the speedo on my 05 type s to the 4.3 final drive i installed. Maybe the 02-04 speed sensor will do the trick since they have the 4.3? I was boosted and had kpro but now bringing it back to stock except im keeping the 4.3 and wonder if theres...
  4. Suspension, Chassis & Brakes
    I just put on my summer wheels and tires, 245/40/17X8 +45, and found that my rear fender is rubbing the tire at quicker turns. I intend to go to a 245/40/17X9 +35 this summer, so I need to increase the ride height slightly. I use Tein Street flex, I have all the tools I need, spanner wrenches...
  5. Bolt-On Basics: RSX (Base)
    RecaroCostsTooMuch 441 White_02 334 Andy 282 AzianK 245 Moises's_Rsx 183 deejay_realist17 95 fightthisfight 71 Prezes5 50 Clark Kent 37 thebigcheez 25 OneSlowDsm 21 Agent Smith 12 XG624 12 AltarBoy 12 iThinkImJoey 12 MajorLeague 9 Xander 4 Shadowdawg204 3 RastaRican718 2 djswan 1
  6. Suspension, Chassis & Brakes
    I bought my 02 RSX Base and it came with Tein coilovers and I want to make the back dampings stiff. I need help how to preload the back dampings. Another question I have is where can I get a coilover adjust tool and price to. Thanks
  7. ECU Tuning RSX
    So last night my tuner and I started messing around with KPRO. Trying out different maps and what not. The one that felt the best was the one for Toda Race headers (i have a cai, race header and stock exhaust) but we noticed a weird as bog around 3300rpm. we analyzed the map and found that both...
  8. Suspension, Chassis & Brakes
    So I got an alignment and wanted to bring it down about half an inch more. I know you gotta do an alignment every time you adjust your suspension, but is half an inch more gonna really make a difference? Alignment where I am from is ~$110 a pop and there are no lifetime shops also...
  9. Suspension, Chassis & Brakes
    Story: Bought slightly used progress coils and had a run of the mill auto repair shop put them on for me. I went to pick it up and noticed the fronts were lower but the rears were about stock(maybe higher). So i figured i'd just have to adjust them quick. so here it is with the wheel off. I...
  10. Problems & Solutions RSX
    anyone got any pictures or know exactly where to sand the rear mugen lip to get the right fitment for the 02 rsx? just got mines from autosources.. props!:thumbsup:
  11. Transmission & Drive Train RSX
    So I adjusted the CMC so it grabbed around the middle of the pedal travel. The helms state to loosen the clutch pedal position switch and then adjust the cmc. It then states to tighten the position switch until it touches the clutch pedal and turn it one revolution again. My question is, by...
  12. North East
    Anyone close to the NJ area with coilover keys/wrenches. That can help with lowering the ride height on my car, I have Buddy Club N1's, and I dont have the keys. Willing to pay $$. Thanks
  13. General Discussion EP3
    I just bought a mugen carbon fiber wing and was wondering how to adjust the fin on it? I've seen in pics with them popped up more and was wondering if anyone knew how to do this? Thanks
  14. Suspension, Chassis & Brakes
    Do you guys know any tricks on how to adjust the front camber on this coil over because there are 6 allen bolts on the top plate and they are being blocked and I can't get to them. Or am I screwed and have to take the whole front setup apart to do it?
  15. The DIY Garage RSX
    Put in some new bulbs and the ds is pointing up high and the ps is down towards the ground? Can someone help me?
  16. Problems & Solutions RSX
    Hi is there any DIY for adjusting the handbrake ? my handbrake is grabing after 13 clicks.
  17. Southern California For Sale: Local Pick-Up
    Wanting to buy adjustment wrenches for function form type 2
  18. Auto Talk
    I just saw a TV ad for the new Ipad 3 and they show a 1 second clip were a guy is adjusting his camber with his Ipad 3! take a look...http://www.worldstarhiphop.com/videos/video.php?v=wshhk3V3vDanOFYBo2ph
  19. Car Audio, Security, & Electronics RSX
    Hey guys, I just got my alarm installed and was wondering if someone can tell me how to adjust my sensor's. It goes off evertime there's a strong wind or if a leaf falls on it. Getting a bit annoying now :run: . I only want it to go off if someone looks through my window. Hold down the...
  20. Bolt-On Basics: RSX Type-S
    I felt that my clutch was too high and I wanted to lower the friction point. Does anybody have the instructions on how to do it? :X
Top