air

Injen cold air intake for Acura RSX Type S colour is black. used but still works great. includes Injen washer fluid replacement bottle. $225 CAD.

Heres the thing. The other day i've discovered I have no heat blowing from anywhere I know: -HEATER VALVE is working and moves left & right freely in engine bay. -MIXER actuator seems to be moving from under drivers area -FAN blower is working -Coolant is all topped up If I set the TEMP...

Hey all, We had our first 90 degree day today. Since I bought the car in February, I tested the AC in 70 degree weather for a few minutes, and it seemed to work. However, I have noticed a couple of issues with the cooling system. 1. Sunday, I ended up getting caught at the store in a...

We just got new Air Lift parts in at our Denver showroom! Come check out fittings, line, water traps, and more! 6810 Broadway / Unit C / Denver, CO 80221 https://www.youtube.com/watch?v=wIwg3_xJI5o&t=28s

So there’s this air hose (see picture) on my 04 rsx base, going from my air box to a hose on the engine. I’m not exactly sure what it is and if it’s a problem or not. My car has been running fine but I’m not sure if I should get it fixed ASAP. It’s circled where it’s broken off at.

Fujita cold air intake with AEM dry flow filter. AEM dry flow filter few years old and recently cleaned. Comes with all hardware and hoses. Also Comptech Replica OBX V2 header no flex pipe, great fit, great sound and gains. Has primary and secondary O2 sensors Primary has less than 20k miles on...

First things first: I bought the car (2003 Type S) completely stock and I'll try to keep it as stock as possible. BUT The intake air temperature bothers me a lot. I have a Scangauge II that I used in a lot of vehicles (mine or belonging to friends) and one thing I noticed is how much hotter...

So I installed my Injen CAI on my rsx, sounds nice, speed and torque is noticeable but obviously not drastic. Do people run tunes with CAI? I did a bit of research and some people don't run tunes but I want to fully take advantage of the CAI

So I have a 2002 base rsx and was not sure which intake is better. Any suggestions?? Sent from my iPhone using Tapatalk

Got 03rsx type s wanted to put k24a2 all motor also got kpro v4

Sold

Hey everyone, so my heat hasn't been working for the past few days and I know the problem. The plastic piece connecting my metal rod to the blend door actuator broke and so there's nothing connected to the door to move it from hot to cold. I'm trying to look for just the plastic connector piece...

Hey guys, I was wondering if anyone has actually ran this Air suspension kit? I have never seen a full review on them besides other chassis such as Lexus's. Was wanting to buy one of the better kits on the market that will hold up over time and have a good ride so hopefully someone can point me...

Maximize the power of your Acura RSX, enhance its looks and let it sound like it never did before with one of the Skunk2 Performance Exhaust Systems. Designed to make your ride faster and more powerful, each Skunk exhaust system is made using premium quality T-304 stainless steel, robotically...

Sold.

$50. OEM intake assembly from a 2002 Type S.

A week ago I went to drive and the car would not go into first. After some time I ended up starting in second, barely. I pulled into the gas station I just left and started researching. My conclusion is it is probably the CMC or CSC as the car shifts fine when engine is off. Also my clutch was...

Hello all, I need some help! I'll try and make this concise and easy to read. I searched several past threads on rsx and honda's in general on this forum and others which lead me to diagnose and find out the following: 1. A/C Blows hot air all the time (moving and stationary) 2. Checked #1...

So I was instaiiling my CAI a while back and the right side of the IAS came off with the original hose 😐, I didn’t know what the hell it was and neither did anyone else, I superglued and quicksteeled it back on.... well I finally just accidentally stumbled upon it, and I also found a ktuned IAS...

Was looking to buy a air vent gauge pod. Saw a few people saying they were going to sell some up on the forums but haven’t been able to get in touch with them. Let me know guys, thanks in advance!