Acura RSX, ILX and Honda EP3 Forum banner
alignment
1-20 of 500 Results
Advanced
  1. Problems & Solutions RSX
    Plain and simple my RSX pulls to the left. It obviously is most noticeable when highway driving, which is why it's bothering me cause I drive a lot. I don't remember noticing it pulling when I bought it or if it did it was very minimal. So I bought the car and did some basic maintenance, brakes...
  2. Suspension, Chassis & Brakes
    Hello guys, I just recently got an alignment and I was wondering if it's good. I daily drive the car and don't track it. Front:Left camber:-1.6 caster: 2.5 toe: 0 Front:Right camber: -1.6 caster: 3.2 toe: 0 Rear:Left camber: -2.2 toe: 1/16in Rear:Right camber: -2.3 toe:1/16in
  3. Welding, Fabrication, & Tools
    This is a no nonsense no BS Guide to how I've fixed my DC5 Steering. I've had diabolical times, spun twice in a straight line, had crap Bump Steer, horrible Torque Steer and no one to tell me simply how to fix it all. So you've lowered your DC5 or similar steered car and you have rubbish...
  4. Suspension, Chassis & Brakes
    Went to a shop to get it done. They said I need to replace my inner tie rod and right outer tie rod. Here is the spec sheet for reference, just want another opinion. Sent from my Pixel 2 XL using Tapatalk
  5. Suspension, Chassis & Brakes
    Hey, so I'm currently stock ride height and stock 16x6.5 wheels, I have 17x8 wheels on the way here right now (still trying to decide between 225/45/17 and 235/40 or 45/17, and was planning on getting an alignment done once they are on, however I have a possible road trip coming up and would...
  6. All Motor RSX
    I have done plenty of reading and found many guides, this by far the one i was going to use http://forums.clubrsx.com/showthread.php?t=260027 , but i have one small problem. i already have my motor and everything pulled apart and cams and all the bolts are laying out nice and neatly all around...
  7. Suspension, Chassis & Brakes
    Hi there, I recently had to get my front left strut rebuilt after a fun little track day at Streets of Willow. Anyhow, after getting the strut reinstalled and installing the SPC front camber kit, I took the car to get aligned. The shop said they couldn't align me correctly because there was too...
  8. Problems & Solutions RSX
    I got an alignment last year, they didn't do a very good job. I redid it myself about 6 months later to make it closer to straight. I first did the toe. It was toed out too far, so I brought it in and tightened it all up. Then I had to adjust camber on the front passenger a little out since...
  9. Problems & Solutions RSX
    Hi all, I am driving a jdm dc5r with stock suspension. Recently I went for an alignment and the following are the camber settings Front L: -1.4 Rear L: -1.4 Front R: -0.4 Rear R: -0.4 As I am on stock suspension without camber kit, I am not able to manually adjust the cambers (if I...
  10. Suspension, Chassis & Brakes
    what alignment specs should I have for a drop of 2 inches, because I can't get the to to zero out, can changing the camber fix the toe? Because right now the tie rod ends are too short
  11. Problems & Solutions EP3
    I have a 2003 ep3 with k sport coil overs. I am having an issue with my alignment not being able to center my steering as they max out one side of the tie rod and can no longer make adjustments. Everything alignment wise is in spec expect the steering wheel, so my questions are: Did i lower the...
  12. Suspension, Chassis & Brakes
    So last Friday I went and got an alignment and balanced the tires at my local Acura Dealer. However, yesterday I noticed the car starting to veer right a bit while driving on street roads. Today, the pull feels more significant and even more noticeable on the freeway. I've checked the...
  13. Suspension, Chassis & Brakes
    Does anyone have the official alignment specs for the 05' Type-S A-Spec suspension? I found the below specs on the forum but nowhere does it list what each number is for..? Like for front camber.. What is the Neg 0 for? What is the 35' for? And what is the +/- 45' for? My assumption is the first...
  14. Problems & Solutions RSX
    hey guys, I am very inexperienced working on cars. really just starting, only installed my k sport coils and CAI. After I did coils I took my car to a shop to get new tie rod ends and rack and pinion installed. Now I took my car for alignment and the guy working said because of how low I am...
  15. Suspension, Chassis & Brakes
    What is the most aggresive alignment spec without a camber kit? I know OEM specs werent that great for spirited driving, from what i read in one of the stickies above. Im not planning on going any lower as I like the type r springs fine. Is is worth getting the camber kit. is it going to make...
  16. Suspension, Chassis & Brakes
    Hey guys. So I drive the piss out of my RSX. I'm knowledgeable about the chassis and I'm just running into some problems now that are baffling me. Here's the issue: So, I've been getting a clunking sound when turning left and right while sitting still or while moving-- whether in gear or...
  17. Suspension, Chassis & Brakes
    Hi All! From my understanding my 03 TYPE S needs it's Front Inner/Outer Tie Rods replaced. I have attempted to align my car several times and have also experienced issues with getting a perfectly straight alignment. I am also currently on Coilovers and in the past have experienced binding /...
  18. General Discussion EP3
    Hey ep family! Ive been lookimg for a good alignment shop that works on lowered cars here in south jersey. Around cherry hill/marlton/runnemede area. Thanks
  19. Suspension, Chassis & Brakes
    Is there a difference between a Type S rack and pinion and a Base Rack. From what I have rear as far as part numbers they are difference. But uses the same Inner and Outer Tie rod ends Or am I wrong on this? Is a type S inner tie rod ends longer then a base due to having a bigger knuckle and...
  20. Problems & Solutions RSX
    Recently dropped the car, needed an alignment... so I bring it to the shop. They did an excellent job. Recently bought Ingalls front and rear camber kits, installed them, brought the car back to the same shop for an alignment. Here's what happened. Brought the car in Saturday @ 10am. I hear...
1-20 of 500 Results
Top