Acura RSX, ILX and Honda EP3 Forum banner

alpha

  1. Engine & Transmission RSX
    Off of my 05 Type-S. This car is being returned to bone stock and traded for another vehicle. Given that, I have parts that have a maximum of 500 miles and some less or none. HKS High power full system exhaust: purchased 2 months ago, about 500 miles on it. no dents, dings or scrapes. I have...
  2. Bolt-On Basics: RSX Type-S
    Which header would suit better the Skunk2 Megapower R 70mm exhaust? Fitment and powerwise :confused:
  3. Bolt-On Basics: RSX Type-S
    As the title suggests I just got a Skunk2 header ready to install except the fact that the damn thing didn't come with bolts!! WHAT Specific bolts did everyone use to get this header to fit??? It will be attached to HKS Hi Power 65mm Exhaust that's on the car already! Again WHAT specific...
  4. Bolt-On Basics: RSX Type-S
    So I have a ITR sway bar which is way more clearance than a type S. I have maybe 1/4 inch clearance all around with suspension loaded. When the car gets jacked up the wheels bring the sway bar down and it hits the header. Other than that fitment is great. Oil filter removed, never had to touch...
  5. Engine & Transmission RSX
    What I have for sale are skunk2's Alpha headers. Full race headers that deletes the cat it's comes with an o2 defouler, along with elbow pipe to connect to your exhaust. It has been freshly wrapped with titanium heat wrap. Check out the link for pictures. I'm asking $350...
  6. Bolt-On Basics: RSX Type-S
    Got a exhaust just need a good header to pair it with. As the title says, I'm stuck between the 2. I know skunk2 has fitment issues but I'm sure I'll get around that. Any difference performance wise? I've heard the skunk2 lags a bit? Not sure what are your guys thoughts on this. How about sound...
  7. Bolt-On Basics: RSX Type-S
    I have the Skunk2 Alpha header and where the 4 goes into 2 the welds on both pipes have cracked all the way around. Ill try to post some pictures of it. I started to notice my girl start to back fire and shit a bit more ... needed a starter put on and had them look at the bolts and stuff...
  8. Bolt-On Basics EP3
    Has anyone ever installed a Skunk2 Alpha header and K-Tuned 3" oval exhaust on the K20A3? I have a JRSC EP3, Comptech Icebox, RC440 injectors, stock header, and Greddy SP2 catback. I'm looking to get a larger exhaust and the K-Tuned oval is the best sounding, looking, and fitting it looks. The...
  9. Photography
    Hi I'm selling my Sony Alpha a65. It is pretty much brand new. Wanted to start a new hobby and realized it wasn't for me. I'm asking $500 shipped. I'm including box, all paperwork that came with it, 2x batteries (oem and aftermarket), strap, wall charger, sd card (will update with size), level...
  10. Bolt-On Basics: RSX Type-S
    I was planning on buying Skunk2 Alpha Headers for my type s and I saw the price on the skunk2 website and saw that it was 470$. I decided to check up on eBay just to see if I'd see anything. I found this poster with great reviews and it seems like a lot of people buy from this specific eBay...
  11. Engine & Transmission RSX
    THIS STUFF IS ONLY COMPATIBLE WITH A K20, NOT A K24. Hey guys, I've decided to go a different route with my build so I am no longer in need of these. Wiseco 86.5mm 12.5:1 CR +10.5cc dome pistons with armor glide, these are brand new and still in the packaging, comes with rings and everything...
  12. Bolt-On Basics: RSX Type-S
    What's up guys just installed this header and it's a pain in the ass!!! I been doing my research on here on sway bar suggestions and what to do but can't really get a straightforward answer. The header is touching the sway bar and therefore making a loud rattle. Any fellow dc5 owners that had...
  13. Engine & Transmission RSX
    valve cover $50 - wrinkle black finish - minor chips in finish https://drive.google.com/open?id=0B0cKmCo5PNihQl9MSW1acmJXYjA call or text Lawrence @ 404 309 1639 for a quick response
  14. Want To Buy or Trade RSX
    As title says looking for plm headers or skunk2 headers and a cut rbc.must come with all hardware..pm me thanks.
  15. Bolt-On Basics: RSX (Base)
    recently i have been looking at headers and out of all i have looked at i hear great things about it... just one downside. everyone says that it hits the sway bar! has S2 worked out the kinks on its header!?!?! i really want this header i just dont want it to bang against my sway bar! please...
  16. Engine & Transmission RSX
    New in the box with all new hardware skunk2 alpha header for sale. Asking 380 shipped. Also a brand new in the box skunk2 70mm exhaust will all the hardware. Asking 425 shipped. Txt 8052954949
  17. Engine & Transmission RSX
    BNIB! Skunk2 alpha header 400 shipped Skunk2 70mm exhaust. 450 shipped Bought just decided to go a different route. I will ship ups ground. Txt 8052954949
  18. Texas For Sale: Local Pick-Up
    Vibrant 3-bolt 2.5" (63.5mm) Exhaust Gasket Twist O2 Sensor Extension O2 Socket Honda K-Series Exhaust Manifold Gasket (sprayed with CRC Copper Coat) Skunk2 Alpha Series Header Everything for $400. I sprayed the gaskets with the Copper Coat in preparation to install but work called me up and i...
  19. Southern California For Sale: Local Pick-Up
    02-04 RSX Tan Dashboard $50 SOLD 02-04 Side Skirts $80 SOLD Skunk2 Alpha Race Header (NEW, with sway bar relocation kit) $425 SOLD Skunk2 RR 3" Exhaust (NEW) $550 05-06 KPro V3 (w/CD, harness, O2 sensor, comp wire) $1,100 SOLD 94-97 Integra OEM front and rear bumpers $120 (selling together)...
  20. Suspension, Chassis & Brakes
    skunk2 says u need a downward hoop type anti sway bar for clearance when u have a k24 with the alpha or megaphone headers. I was unable to find one... Any body have any interest in purchasing one I have a shop fabricating one for clearance... i love the power that I'm able to get with this...
Top