Search Results for ‘angle’

How come all the top sidewinder manifolds have the waste gate flange at 90, when all the companies and turbo heads say it should be mounted closer to 45?

I have a lightly used (2 month old) Invidia Race Header purchased for $550 plus tax. I'm willing to let it go in box for $450 obo cash locally in the So Cal area. Also willing to ship if needed. This is one of the best aftermarket header on the market for the RSX. I will also hook you up with...

Anyone know what it is on the '05/'06? Internet search turns up nothing.

Putting on my coilovers and I've gotten all of them done except I can't fill get this bolt off it was seized and I was able to get it off the nut but now it just spins endless when I try and take it off

Has anyone done this ? I used an extra elbow from my Injen SRI to angle it up so it's not parallel to the ground, hopefully it avoids more rain. Haha.

im on a k24a2 bottom block with the z1 head all internal stock using z1 oil pump etc. since the prb cams are 50 vtc. should i limit the vtc angle to 25 or i should be fine. for light driving until tune.

I took my 2002 Rsx Type-S in for an alignment and when It was finished they gave me a paper stating *Adjustable strut mount required to adjust caster angle*. Could that be the reason why the ride is so bumpy?:rest If so, could you send me a link for adjustable strut mounts for a dc5?

06 k24a2 stock on ep3 ecu kpro v2 drive good. Pulls good. Drove on base map for a year. Went to have it tuned the other day and the cam intermittantly stops following the command -+1-7° then fixes it self right up. Does it during cruise as well. You wouldnt notice it unless u were watching a...

Anyone got one they can cel (sorry). Send me a PM!

lately when I drive my car hard when autocrossing my alignment gets screwed up. Also my steering angle changes a little, but when I make a hard turn the other way it like goes back to where it originally was. I have the skunk 2 pro c coils and I was thinking that the lock nut on the bottom part...

Sold

So I'm tuning with magnesium & he said that my cam angles are reading negative and are not responding to changes. He said that the car is either out of time or the sensors are bad. The car is not out of time because it goes into vtec & throws no cel for cam timing. When I did the cam install I...

these are better then your regular DIY one since it can angle it away from the Chassis. 15 firm picked up in oakland. :thumbsup: certain thing you can buy used like this and save a couple bucks instead of waiting for it to come in the mail and what not. Can also install for you for a extra 20$...

[4] NEW AXIS Angle Rims 20x9 5x114.3 - 700 OBO and [4] NEW AXIS ZERO Rims 20x10 5x114.3 - sold Seeing what I can get for them. pm me

714 305 6743 anahiem area

Shipped prices are for 48 US states only 1) PLM/CRSX Race Header Assembled (10K miles) - $375 shipped 2) Apexi GT Spec Catback Exhaust for Type S - $325 shipped 3) Progress Competition Coilovers (10K miles) - SOLD 4) Progress 22mm Rear Sway Bar, Excellent Condition - $90 shipped...

hello i have a stock header to a test pipe with a twist cel eliminator also a new primary o2 senser im throwing a code at auto zone it was checked at po420 im pretty sure this is for the secondary o2??the car is running fine but i wana make the code go away i have read all the posts ive heard...

Ok so I ordered this part from acura oem 37890-PND-A01 known as a sensor assembly angle. When I go to the shop to get it installed, the part doesnt fit...fml! The 1st time I wrongly ordered for a 2005 rsx, so I say to myself ok next time I order for my 02. I order for my 2002 and the part...

Hey guys. Not sure if its a problem or not but wanted to get your feedback on this I took my center console off today and discovered this. Can anyone tell me how to correctly re adjust this Thx. See attached pic.....