Acura RSX, ILX and Honda EP3 Forum banner

answers

  1. New Member Introduction RSX
    I have 06 rsx frank swap full bolt on and tuned on k tuner. Made 215 whp. Any ideas why numbers are low?
  2. New Member Introduction RSX
    Sup everyone!!! Just wondering, whats a good website to buy some body parts or some basic mods? I dont want to buy off of ebay/amazon because they have let me down:thumbsdow(previous purchases). I also tried CarID but its a bit pricey, any reliable suggestions?
  3. Wheels & Tires
    Ok I have Pm'ed and posted for a while now without any answers :wait:. So i'm making a thread. I don't see a lot on this forum about 17x8.25 wheels. I do not know whether to buy a set of these with a 22mm offset or a 36mm offset. Which would be a better decision in your opinion. I am all...
  4. Problems & Solutions EP3
    Hi Guys, I currently own a bone stock habby red 2007 FG2 that I owe a chunk on, and to lower my debt, I'm joining the EP owners club! I found a guy with a taffy white 2003 EP3 for a reasonable price in it's condition, but it's got some issues right off the bat that I need to address. As it...
  5. Problems & Solutions RSX
    I have an Acura rsx 03 base model I bought, it has a full 06 type s conversion (when I bought it), engine and body wise, I have a few problems which I wanted to know if they could be associated with the conversion, I have an idle problem once the car is warmed up the idle drops from 1000 Rpms to...
  6. Problems & Solutions RSX
    Quick question. Cylinder 1 and 4 is miss firing. I have like a chocolate substance in my motor oil. [Coolant and oil mixture] that's what I read on different threads. But people who has that usually overheat as such. My car never overheat nor showed any signs of it. Is it possible to have a bad...
  7. Problems & Solutions RSX
    I found 3 or 4 threads of people asking about this with no solution. I just swapped my clutch to a cc stg2. I have 466 miles on it so far. Pulled a data log on it today and haven't beaten on it at all until about 415 miles into the break in(nothing too hard either). It started after the log...
  8. General RSX Discussion
    Hey guys, I've got an 04 base model rsx but I did a k20z3 swap with a type s Trans. My question is I've still got a base model cluster so will an si engine read differently on a base model rsx cluster? when i take off from a stop I'll be at like 2000 rpm or around there and the car jerks a lil...
  9. Problems & Solutions RSX
    First some background info before my question: I have a 2004 RSX type S with Kpro. My installer just installed new Kelford 179-A cams, RBC, BC valvetrain, and RDX injectors. The injectors are giving us problems. My installer needed to splice the factory wiring for it to be compatible with...
  10. ECU Tuning RSX
    06 rsx type s w/kpro street tuned. Its been awhile since i hit the car above 8200 rpm. Today i went and gunned it, as soon as i hit close or hit redline (8600) my engine light flashes. My question is, is it knock? MiSfire? Or just set up to flash when redline is hit? I appreciate any feedback...
  11. Problems & Solutions RSX
    I have an issue with my car it is throwing a p1259, check engine light is on and oil light is flickering. As well as a scratching/metal ticking sound coming from the engine. any ideas what this could be? I have read many posts and its ranging from vtec malfunction/ oil change/ oil pump/ ecu/bad...
  12. General RSX Discussion
    So I picked up a k20a block (base) witch has a k20a2 head on it (prb stamp) but the intake cam has a stamp that reads RBC...I'm wondering if they are type-s cams with the rbc cam gears or if it's type-r cams or maybe si civic cams...how would I figure this out?
  13. Problems & Solutions RSX
    ever since i have put my k20a2 in my rsx it just feels very weak. figured it had something to do with me having reflash with type r cams and no cams as i replaced the motor. So i went out and got kpro and still just as weak figured that would have made somewhat of a difference but didnt. it has...
  14. Suspension, Chassis & Brakes
    I recently bought eibach pro kit lowering springs for my Rsx. They say that they dont blow the original shocks since they only lower the car about 1" to 1.5". The problem is that i dont have stock shocks. I bought the car about a year ago and the first thing i had to do was changed the shocks...
  15. Problems & Solutions RSX
    hey clubrsx i searched and found nothing. I just installed my dc rh and noticed a really strong smell of gas when driving with windows up or down. It is supposed to be like that or do i have a leak somewhere? also the heatshield that was above the cat is not rattling against the race header do...
  16. Problems & Solutions RSX
    My car has some innovative motor mounts that were installed by the previous owner. I've bought the car 3 weeks ago and the vibration hasn't stop. I've done some looking around and people has given a whole lot of ideas and answers, but none of them were clear. How am I supposed to stop the...
  17. The DIY Garage RSX
    I have done some searching and can not find any good way to take the HUB off or replace wheel studs. Hopefully here we can supply some tips and tricks for replacing wheel studs or removing the hub sice there are at least 2 or 3 ways to do this process and some need special tools like a press...
  18. General RSX Discussion
    I was wondering if someone can tell by mileage how much a 2002 base rsx stock should go for. 80k-89k=$_____ 90k-10k=$_____ 100k-110k=$____ 110k-120k=$_____ 120k- so on=$_____ I found a 02 rsx base with 155k miles, clean title, one owner for 5k. do you think its good? please help
  19. Wheels & Tires
    I have a set of enkei's that are 17x8 +38 and a set of 225/45/17s. Also im on BC N+ with like no gap in the back and 1 finger in the front, planning on lowering the front when wheels go on to be even. Question - am I gonna need to roll my fenders and camber? Ive had these on my car before and...
  20. All Motor RSX
    So I've been reading around and searching a bit and I see alot of conflicting information on running E85, plus most of the threads are kind of old. I would like to know exactly what's involved in running e85, because I am getting tuned in the near future and it would make sense to get this done...
Top