arm

Has anyone here changed out the rear upper outer control arm bushings? It’s the bushing that is in the top of the knuckle or spindle whatever it’s called. My question is I can’t tell if there is a metal sleeve in there or if it’s just a rubber bushing. My new whiteline bushings do not have an...

Sold delete thread

So on my 2005 base rsx I decided to replace the front lower control arms because the bushings on both sides were completely shot. The removal of the arms was super simple. However, in order to save some money (and the fact that control arms from acura cost $325) I ordered control arms on amazon...

I may have found the end of my 2002 Type S. It's a 2 owner, high mileage car (251K) that's lived in Ohio since new. It was undercoated at new and the unit body is in very good shape over all. There are small spots on each quarter near the rockers and a bit around the fuel door. It's...

Cleaning out my basement and found some parts that could be of interest: 1) OEM Headlights 06 RSX-S with Lexus RX330 retrofitted projectors and custom shrouds. Headlight lens was damaged from an accident but the retrofit components (Projectors & Shrouds) are mint, perfect donor parts for a...

For sale is a set of Energy Suspension Front Control Arm Bushings Color: Black Condition: BNIB Asking $50 Located in SoCal 92804

For sale is my DC5 Type R front lower arms with an extra set of front compliance bushings from a DC5 Type R vehicle. SOLD! The bushings are specific to the type R because they have aluminum casings instead of steel like the USDM version. The DC5 Type R front lower arms are in good shape...

What size of 10pt socket I need for the rear control arms? I'm not sure if it 16mm or 19mm?:dontknow:j

Hi all, First off, thanks for dropping in. I understand this problem seems to be quite common with RSX from reading these threads on this forum. I want to just say I am not a expert car enthusiast, just like my RSX and have been driving it since the very first day that I bought it in 2004...

Installed new spc rear camber arms. About 50 miles on them right now. Do any of you that have spc or similar camber arms have bushing flex? Bushing is getting pushed in. Camber is set at "-1", toe at "0". Take a look at the picture. Is this normal?

Never been installed 100% Authentic and Brand New comes in original box $50.00 o.b.o. free shipping in the US text me for quicker response (786)-623-7877

WTS brand new in box Energy Suspension front control arm bushings Got the full bushing kit decided to get spherical up front selling the front control arm bushings only! Looking to get $50obo shipped!

Has anyone on here ever bought the Moog front lower control arm RK640287 or RK640288? Cause I currently have it installed but seems he Ball joint bushing is a tad bit bigger than oem and causing the ball joint to fall through so my question is what washer size are you guys using? thanks!

02-04 OEM headlights. housings painted to match the type r JDM style headlights. so it's a very dark bronze, you can only see the bronze when the sun hits them. high beam housings have been painted anodized yellow. lenses are perfectly clear no hazing whatsoever. all OEM parts. no broken tabs...

Does anybody have any clue to what size these flange bolts are? Ive tried looking for them on the diagram but its not an rsx diagram. Help..

My question is(which I tried my best to research and really found no answers) which brand other than OEM is a good brand for the front lower control arm on an 04 Base? Hopefully you guys have any suggestions.

I'm gonna be running 18x10.5 +25 on 275/35/18. Anyone running this setup or know if the wheels will hit my rear trailing arm?

So I was helping my friend move out this weekend and he had a set of brake and suspension parts lying around. He let me have them and told me they were from an 04 RSX. This was cool as the 02-04 RSX rotors fit my EP3. As I was cleaning them off I noticed something odd. The rotors were 300mm x...

tried to do custom tie rod set up but failed, so I'm looking for driver and passenger side steering/ tie rod arm (the part that connects to the front knuckle,dunno what its called).

Like the title says, my RSX has pulled to the right since I bought it (used). I took it in for an alignment and they said that they did all that they could for the alignment but the pull was caused by a bent front right control arm as well as a slightly bent frame. I found what looks to be the...