Acura RSX, ILX and Honda EP3 Forum banner


  1. Wheel bearing? Odd Passenger side wheel sound..

    Problems & Solutions RSX 04 type s ^^Heres the video of the sound. This is at about 35mph. At lower speeds maybe around 15 the sound is louder with more time in between. Higher speeds it kinda blends together and is less noticeable. Doesn't make the sound when revving...
  2. Wheel bearing going out?

    Transmission & Drive Train RSX
    So I was just cruising on the highway in my rsx and suddenly I noticed a vibration coming from the front left wheel. The vibration would diminish when I would turn right and would intensify when I would turn left. Vibration noise has progressively gotten louder and can be felt in the steering...
  3. Wheel bearing replacement

    Problems & Solutions RSX
    I believe my front passenger side wheel bearing has gone out and I need to fix it cause the noise is starting to get louder. I've looked up how to change it but I'm kinda confused and getting mixed information. Some say that I can just change out the wheel hub as it has the bearing in it, which...
  4. Wheel bearing or just a bad wheel?

    Problems & Solutions RSX
    Hi, can anyone help me figure out if this could be a wheel bearing or just a bad wheel?
  5. LSD bearing advice

    The DIY Garage RSX
    Taking the tranny out, but will have a professional install the LSD. Since it's coming apart, what bearings should I replace? This is on the ultra high HP turbos type S. I have no idea how hard it was beaten on before I got it. All seems well, but preventive maintenance may save me down the...
  6. Clutch questions (uneven wear, flywheel warped, throwout bearing)

    Problems & Solutions RSX
    TL;DR? Skip straight to the bolded questions and see if you can answer at least 1 of them... So, I've finally cracked open my clutch and have ended up with way more questions than I originally had. (Here's a link to the original thread for anyone that cares:)...
  7. Bad wheel bearing?

    Problems & Solutions RSX
    Hi so still learning about my 05 rsx type s and I was lifting the car up and noticed my driver side wheel clanks when I hold it on the north and south part of the tire and shake it a bit up and down. Also if I put the car in gear and let both wheels spin one is definitely a lot slower. Driver...
  8. FS PCI Spherical LCA Bearing Kit

    Suspension & Brakes RSX
    For Sale Bnib PCI Spherical Bearing Kit, Asking $250 shipped.
  9. Opinions on my main bearing clearances

    Engine Building & Design
    Hello all. I took a bit of time a couple nights ago to double check my clearances I was getting on my mains in my rebuild. I used the block and crank codes to get my colors and bought all brand new oem bearings. My plan for the motor is going to be a high compression N/A motor with high lift...
  10. Rattling noise from under car...throw out bearing????

    Problems & Solutions RSX
    ***update*** So, pretty sure this is what's been happening to me. **************************UPDATED, PLEASE VIEW NEWEST POST...************************** Original post: I'm hoping for this to not be the clutch, seeing as how I just paid $400 for a custom clutch job from a friend about 4...
  11. Issue with rear hub bearing and Brembo

    Problems & Solutions RSX
    Hello, few weeks ago I started hearing noise coming from rear left wheel, it came out to be a bearing. I have 2006 RSX type-S with whole Brembo conversion. I bought new hub with bearing dedicated for RSX
  12. FS: Function7 LCA w/ Spherical Bearing!

    Suspension & Brakes RSX
  13. FS: Function7 LCA w/ Spherical Bearing!

    Canada East: For Sale & Want to Buy
  14. Brand new Clutch/Flyweel/Throw out bearing. making noise

    Problems & Solutions RSX
    hey guys so a wile ago my throw out bearing went completely so i just got a new clutch/pressure plate/ flywheel throw out, everything basically all new and the car drives great. just today i was sitting in a drive threw and i heard my throw out bearing making the same little chirping sound like...
  15. Throwout bearing?

    Problems & Solutions RSX
    my car is making a fast clicking sound, and is seems to be coming from the clutch area. Now when ever I press on the clutch the noise would go away. i was wondering if it would be a bad throwout bearing. if not what could it be?.. and also can i still drive it around until i have the money to...
  16. [INFO] Honda K-Series Engine Bearing Identification, Installation

    Engine Building & Design
    This is from Honda K-Series Engine Bearing Identification, Installation Honda uses a specific bearing selection process for both rod and main bearings. It includes using a chart along with the identified parts included in the engine being rebuilt. Connecting rod...
  17. Crankshaft/Rod Bearing Questions (Please help)

    Problems & Solutions RSX
    So I have taken apart my engine (k20a2), and I found that I have spun a rod bearing (it's what I expected). It also looks like my crankshaft journal for that rod bearing has been scratched a bit. I am going to get it cleaned up and smooth again. Now for when I get new rod bearings, I need to...
  18. How do I know how much was shaved off my crank from a spun rod bearing?

    Problems & Solutions RSX
    I've been looking at a lot of threads recently as I am replacing my rod bearings in one of my cylinders. My engine has spun a bearing and I need to know how to measure how much was shaved off (should I use thicker bearings or thinner). I need to find out asap so I can order the bearings. Thanks...
  19. Strut mount/top hat, seat plus bearing

    Suspension & Brakes RSX
    $60usd plus shipping Email me at [email protected] Located edmonton alberta
  20. Clutch? Throw out bearing? problem

    Problems & Solutions RSX
    Hey guys a little wile ago on my way to a carshow my clutch pedal starded to feel real strange kinda feels like im pushing it threw sand if that makes sence. anyways my car starded to make this sound when i didint have the clutch pushed in like a chirping sound but went away when i pushed it in...