Acura RSX, ILX and Honda EP3 Forum banner

bigger

  1. All Motor RSX
    i have a stock 06-08 k24a2 short block that i will be mating with a 02-04 k20a2 cylinder head. i will soon be taking the head to a machine shop once i figure out what size valves i should get. i wanted to know how big i should/could go without hitting 12.5:1 pistons using stage 4 cams. im...
  2. General RSX Discussion
    Now, to my understanding, in order for one to get the gains in HP, one should buy an entire cat-back exhaust system. Which is sort of my plan (for later on, anyway). But the problem I run into is, I'd really rather not have my car get a lot louder. I've heard that there are "silencers" that are...
  3. Suspension, Chassis & Brakes
    Sup I have a question about myalignment. I'm drop with mugen SS with tien s-tech springs. I have ingulls front and rear camber. The springs set it and it sets a pinky gap above me tires which is 235/45 on evo8 wheels. The guys at my local shop did my alignment numerous times and still can't...
  4. All Motor RSX
    Hey crsx I got a question in regards to my frank swap. I'm in the midst of my build right now, k24a2 block with k20a2 head. My head is at the machine shop for about two more weeks being revamped and port and polished. So with that being said here is the question - I currently have kelford...
  5. Turbo RSX
    So I am gonna boost here pretty soon and went ahead and installed my fuel pump and injectors to get a head start. I updated my calibration to reflect the bigger injectors and it ran like crap. Put it back to normal and it runs fine. My question is: Is it harmful to run bigger injectors...
  6. Suspension, Chassis & Brakes
    i want a bigger rotor aem makes one and you dont need to change your calipers, any other good brands that i can buy?
  7. Bolt-On Basics: RSX Type-S
    My current mods are: AEM V2 Megan Racing Race Header Skunk2 60mm cat-back I'm wanting to upgrade my Skunk2 60mm cat-back to the 70mm piping but with my current mods will that be ok or will I end up losing HP because of the back pressure issue? I have no intentions on a turbo for my whip so...
  8. Wheels & Tires
    Hey everyone, I have 17 inch Yokohama AVS Model T5 rims that im going to put on my 03 RSX-S. Two are 17x8 and the other are 17x9 and I am wondering whether I should toss the 17x9's in the front because it's FWD or if I should just toss em on the rear as it's not like I track the car or anything...
  9. General RSX Discussion
    I have an 04 type-s and i replaced the stock 04 16'' rims for stock 17'' 05/06 rims. I'm trying to figure out my mileage so i reset my odometer when i filled it but will the rim size difference change the odometer reading? If anything i think i should be getting more miles since the car thinks...
  10. Southern Cali
    ::Fender Rolling:: ::Fender Rolling:: ::Fender Rolling:: ::Fender Rolling:: MESSAGE ME TO GET YOUR FENDERS ROLLED! scheduling with me is super easy: just PM me & we go from there Locations: Orange County, Irvine, Westminister, Garden Grove, Inland Empire, Los Angeles, Riverside, San Diego -...
  11. Problems & Solutions RSX
    ok, i currently have the K24A4 in my RSX. It is completely stock. The injectors on it are 270cc. i plan on using my RSX 310cc injectors. What do i have to do to not have any problems. I'm referring to kpro. What do i have to mess with?
  12. General RSX Discussion
    I have k24/K20 with just basic bolt ons intake header exhaust lowered k pro Would i gain anything by going to 440cc or is it pointless without turbo or more intense mods? I am planing on getting intake manifold and a bigger throttle body if injectors is a waste right now would they be useful...
  13. All Motor RSX
    Has anybody used a prb ecu with a k24/k20 with bolt ons and cams? I was told by the mechanic I took my car to that the car is not going to run lean. Also I don't know if the engine has the same compression as the k20a2. The thing is that doesn't make sense to me. It is a bigger motor with...
  14. Bolt-On Basics: RSX Type-S
    i know this has probably already been asked before but i tried searching and couldnt find anything closely related so don't flame me please... my question is whats the biggest size injector i can run on an 06 rsx type s with strup race header, greddy ti-c 70mm catback, aem v2 intake, k-pro...
  15. Want To Buy or Trade RSX
    Like title states above I'm looking for a 70mm exhaust or bigger... It has to be in great working condition... Give me your price shipped to las vegas 89031...
  16. Supercharging RSX
    anybody running a bigger throttle body with their s/c setup see any significant or worthwhile gains?
  17. Want To Buy or Trade RSX
    Like the title says i need a wastegate asap..let me know what you guys have. Thanks alot! you can txt or call me at 240-818-8457 or my email is [email protected]
  18. Want To Buy or Trade RSX
    wtt my greddy evo 2 for a bigger exhaust like 2.5 to 3"
  19. Want To Buy or Trade RSX
    wtb 2.5" or bigger exhaust for my type s:rolleyes:
  20. Mid West
    Illinois *CHAT* Give a bigger tip & we'll provide a bigger dessert nom noms [Ver 19] melo_1981 368 Koneko 277 imbest123 245 krystar 203 tallok 163 TireMeltingRSX 111 Zephere901 86 lostgrl16 77 DJCarbine 67 scottemad123 51 JayPee_inc 43 skateanddestroy 26 acidslug39 25 spectre 22...
Top