So I just got a OEM Type R Wing and I tried putting some bolts in from Lowes but none of them really fit. One bolt I thought fit ended up getting stuck and I can't pull it out. It is stuck in the helical structure that is now loose. Do you guys know which exact bolts to get. Also should my...

I hastily tightened these 2 bolts by hand then closed everything up. This is in a K24A1 CRV. Engine been running normal after a couple hundred miles. It should be 16 ft/lbs. How critical is the torque? It is securing the bearing cap right at the chain wheels. Should I do over? Such a pain.

I hastily tightened these 2 bolts without using a torque wrench. Supposed to be tightened to 16 ft/lbs but I probably went over. It's in a K24A1 CRV. Engine runs normally. Being right next to the chain wheels I thought these might be critical. Will I need to do over or leave it ok?

Selling my Ingalls Front Camber Bolts my new coilovers have camber plates so I no longer have a need for these. Nothing wrong with them, they did their job. $15 No shipping local to East Bay Area only PM or Text me 925-819-0886

Selling my Ingalls Front Camber Bolts my new coilovers have camber plates so I no longer have a need for these. Nothing wrong with them, they did their job. $15 No shipping local to East Bay Area only PM or Text me 925-819-0886

I bought this car 2 months ago and am still new to everything and I needed help with finding bolts for my rear transmission mount on my 05 type s I'm pretty sure it's missing a couple bolts.

sold

delete

For everyone with an Invidia RH I was wondering if it came with new exhaust manifold bolts. Mine are pretty rusty and I want to order a new set if it does not come with the RH.

So, I was going to clean my IACV and in the process snapped 3 of the bolts that hold on the throttle body. I NEED to get it off to clean it and my IACV but can't find the size of the bolts anywhere. The heads of the bolts snapped off, so they are just jammed in there. All I need is the size of...

Today was a failure, I tried to replace the rear motor mount but got stock with the removal of the damn rh. The location is the problem, don't have much space to move back there. Should I let the car warm up and then try to remove the header bolts? I don't want to strip them. I tried using a...

Howdy. The Honda schematic is a mess in this area, and the bolt (#26 in the "rear lower arm" pic - it's pointing forward, and is in the general area I would think it would be) only says that two are needed, when I would think that three would be. So if anyone has done this before and knows...

Question is as stated in the title. Is there a sequence I need to follow when removing the lower block bolts just like you do when removing the head? Or not? If there is can someone provide me with the sequence? Thanks in advance.

I'm trying to get as much negative camber as I can from Camber bolts only for an autocross setup. I have a camber bolt in the upper hole currently. If I add a second one in the lower position, would this also add even more negative camber, or do nothing at all? My thought is that the upper...

Does anyone know where I can get bolts/washers for my spark plug cover for a K-series? The ones on PJDM are for an H-series, or will those fit on the K-series as well?

Brand new never used still wrap and boxed, never got a chance to install. $60 shipping included

Sorry if this topic had already came up but i couldn't find an answer.. This is going to be my first mod on my car and i was wondering if i should Kpro it or instead buy some bolt ons. Which option would you guys recommend? This is my first time modding so i may not have that much knowledge...

today i was going to change the spark plugs on my 2002 rsx base. i was trying to remove the plastic cover to get to the spark plugs but the little bolts dont come off. they just keep turning and turning . how can i get them out ? the 2 bolts are circled in the picture. thanks!

today i was going to change the spark plugs on my 2002 rsx base. i was trying to remove the plastic cover to get to the spark plugs but the little bolts dont come off. they just keep turning and turning . how can i get them out ? http://imgur.com/4Hadkd8 the 2 bolts are circled in the picture...

I need help locating camber adjusting bolts that adjust greater than 1.75 degrees. I was told that there are camber adjusting bolts that can adjust to 4 degrees, but I cant find them anywhere. Please send me a resource contact or tell me how to accomplish this. Thanks Grayfox:fistbump: