Acura RSX, ILX and Honda EP3 Forum banner


  1. Eboost2 boost controller $295!

    Engine & Transmission RSX
    Hey guys! Selling my eboost 2 boost controller. I'm only selling because I'm currently not needing a controller, just going to tune boost with my ecu. This is a great gauge, very attractive and user friendly. Letting this gauge go to get it out of my sight. Retail is 450+ on these. $295 takes it...
  2. manual boost controller and 1000cc injectors for sale

    Forced Induction & Nitrous RSX
    Good evening fellow members, I am parting out my car because I am getting rid of the car soon and moving on to something better. I will pay for shipping for these 2 items. If there are any questions, feel free to pm me or email me @ [email protected] or text me at 832 455 6688 to get quicker...
  3. Lean Cut during boost since Walbro 255 install

    Turbo RSX
    Whats going on guys? Im hoping someone can relate and help out.. My car is running lean during boost and hitting cut off since installing a walbro 255 intank My car ran fine on the stock pump with an inline 255 to supplement it on pump gas. Since the stock was replaced with a walbro intank and...
  4. Shycoolboylikeme's Progression Thread: K24 on Shy Boost

    Member Show-Off RSX
    Hey all, I have been a member for about 4 and a half years. My car is a 2003 Type S, it has gone through many phases in these years. The following is my first progression show-off: Turbo Build Updated on Post #3 Dirty Car and Bumper not sitting Proper DYNO: 336whp and 254ft/lbs on 8psi...
  5. increasing little boost without tune?

    ECU Tuning RSX
    I am currently making 270whp at 8 psi it was dyno tuned. I want to adjust the boost controller to make it 10 psi. Does kpro automatically calibrate maps somewhat if the boost is a little higher? I wonder because I have seen people who simply increase the boost by 5 psi (not on rsx) and they...
  6. WTB Boost gauges

    Want To Buy or Trade RSX
    Looking for all gauges for my JCSC set up ,please help me out
  7. WTB: Injectors, 3" Straight Exhaust, Front Bumper, Boost Controller, 3-4BarMap Sensor

    Want To Buy or Trade RSX
    WTB: Injectors, 3" Straight Exhaust, Front Bumper, Boost Controller, 3-4BarMap Sensor Title says it. Need 750cc or 1000cc injectors, Exhaust Front bumper Boost controller 3-4 bar map sensor Car is a 02-04
  8. B> Boost By Gear Kit for JRSC

    Want To Buy or Trade RSX
    as title stated, i would like to purchase a BBG kit for the jackson racing supercharger
  9. JRSC not making boost

    Supercharging RSX
    I have 3inch pulley and 650cc injectors, and Kpro... When i push the throttle to the floor, i can the charger start whine but it stops when i hit -0.9 psi I am totally lost. I sprayed brake cleaner to check for leaks. Does anyone have a diagram of the vacuum lines set up?
  10. 1st RSX , SSM , Boost and daily driven ..

    New Member Introduction RSX
    Just wanted to finally introduce myself as I have been lurking for the past few months. I finally found a car that I liked and pulled the trigger on her. She's an 05 SSM Type-s and I love her. Purchased her will all of the modifications done to her already but I have plans to change a lot as...
  11. --- Rlippy's Dads RSX BOOST INSIDE ---

    Member Show-Off RSX
    So, I was a little bored tonight. If any of you are frequent on my thread, you'll know that my dad has an rsx as well. I thought his car is to the point where I could finally make him a show off thread. Its a 2004 Factory A-Spec RSX-S. Enjoy! Exterior- Aspec Front Lip Aspec Rear Lip Aspec Side...
  12. WTB: ID1000cc injectors, boost gauge, air fuel ratio gauge

    Southern California For Sale: Local Pick-Up
    Im looking for ID1000cc injectors with adapters if needed for plug and play. Also looking for boost gauge, air fuel ratio gauge, and oil pressure gauge.....all red digital preferred. Let me know asap
  13. FS: 05/06 Type S Wheels | Turbo Kit |

    Florida For Sale: Local Pick-Up
    Located in the Tampa Bay Area, Florida Text: 727-542-7143 Paypal accepted, cash preferred. K20Z1 Block - EXCELLENT CONDITION. 98k miles when it was removed from the car. Complete. No problems at all! $750 obo SOLD! SOLD! SOLD! SOLD! Exedy OEM Replacement Clutch - Complete kit. Less than...
  14. what wires do i need to run from AEM TRU BOOST to tune/read properly

    Turbo RSX
    I have AEM tru boost and I dont know how to connect it to the ecu to adjust the boost.. Ive searched on the install but cant sem to find it.. any leads? thank you:fistbump:!
  15. FS: Gold Rota Boost 17 x 8 +35 $200 OBO No Tires

    Southern California For Sale: Local Pick-Up
    For Sale: Gold Rota Boost 17 x 8 + 35 Condition: 7/10 NO TIRES, Current tires are done. $200 OBO Serious buyers only. Rsx is long gone. These are Leftovers. Must sell this weekend. Rims have been posted on CL as well. Call me: Seven14-856-5257 -Thanks:fistbump:
  16. Kpro greddy boost control question

    Turbo RSX
    I just ordered my kpro v3. I have a greddy turbo kit. I also have a Greddy profec B spec II boost controller. The tuner @ pruven performance says he can't incorporate my boost controller into his tune. I like my boost controller. I like the fact that it has a high and low boost option with the...
  17. Will 3" pulley on comptech sc make 12 lbs of boost?

    Supercharging RSX
    I have k20a2 I'm putting my sc aftercooler merc racing everything. Except my pulley. I want to make as much power as possible and make as much boost as I can. Can I use a k24 crank pulley on my sc or is it dangerous and will fuck shit up. I seen a article where it advises not to do it. If...
  18. k20a dc5 motor on boost

    Turbo EP3
    What's up guys. New here and I'm planning on getting a civic si 02-05 hopefully white. I have a k20a I bought a while back and was going to put it in a eg and then a dc2 but now I want an ep3. My question is has anyone put a turbo on a k20a without it blowing? I've searched and searched but...
  19. Falling Boost Pressure

    Turbo RSX
    Guys im pulling my hair out here. When i installed my new 5831e i decided to replace my very old turbonetics evolution (regretting now) and in its place put a turbosmart 38mm (used from a friend) well the car has been running great with the exception of one thing, its not hitting target boost...
  20. WTB: Fuel Setup, Hondata Boost Solenoid, Oil Feed/Return Setup

    Want To Buy or Trade RSX
    Hey everyone. Looking for some parts so I can start my build. Fuel pump Fuel rail Fuel pressure regulator w/ port for boost 1:1 boost compensation High flow fuel filter Fuel feed and return lines Oil feed and return lines Oil pan with return port Blow of valve Hondata boost control solenoid 4...