Acura RSX, ILX and Honda EP3 Forum banner

brake

  1. Brakes

    Brakes

  2. Suspension, Chassis & Brakes
    Hey guys, so recently I was lucky enough to find a pair of TLS Brembo front calipers and was looking forward to making them fit my DC5-s I am aware that the mounting brackets will need to be bored out to fit the bolts as well as a 5 mill spacer that must be grinded to fit behind the rotor. My...
  3. Problems & Solutions RSX
    I replaced the master cylinder and abs module on my 03 rsx type s. I started bleeding the lines and the front 2 bled no problem but I can’t get brake fluid to the rear two brake calipers for the life of me. I’ve been using a vacuum brake bleeder too so I know it’s not a problem of not bleeding...
  4. Lighting RSX
    i need to know what are the wires for in the 4-pin brake pedal switch. any help is appreciated.
  5. The DIY Garage RSX
    Do you guys have any preference for replacements other than OEM? Daily driver that is stock, 03 RSX-S Sent from my iPhone using Tapatalk
  6. Lighting RSX
    Hello guys, Does anyone know which would be a good replacement for 2005 RSX Brake light bulb? I know the size is 7443. But there is one thing... As I understand a brake light is a tail light but becomes brighter(the same bulb) when you press the brake pedal. And I'm not sure if any 7443 bulb...
  7. Suspension, Chassis & Brakes
    https://youtu.be/2fS1GOTLDw8
  8. Exterior & Interior RSX
    bnib splash guards, not mud flaps. this is left, right and center. I can part them for $70 shipped a piece or $`180 for all 3 shipped. JDM brake ducts brake new, does not include the tube that goes to the brakes. $70 shipped nrg hub, slightly used $60 shipped
  9. Suspension, Chassis & Brakes
    Have a video for you guys. Sorta the Do's and Dont's of upgrading brakes for performance. https://youtu.be/ukgtinTMP7s
  10. Problems & Solutions RSX
    Hey, Long story short, I bought a 2006 Type S from a dealership with 120,000 miles on it, 3 weeks ago today. End of last week, the brakes started grinding. So I bought parts, and went to replace the pads. Ended up that the driver's side caliper was seized...So replaced that as well. So the...
  11. The DIY Garage RSX
    we did a reverse DIY on how to replace brake calipers, rotora, brake pads and stainless steel lines. we hopes this helps you guys and if you have any questions please feel free to ask https://youtu.be/ineHBj09VKQ here is a link to the DIY
  12. Suspension, Chassis & Brakes
    Just gottem installed over the weekend. I little bit stinky for the first couple days, but after breaking them in... wow, what a difference in braking. Smooth and yet responsive. I'm glad I read the boards before purchasing them so as to not get the blue box hps (aka school bus squeak kind)...
  13. Problems & Solutions RSX
    Hi all, I have a quick Q about the parking brake cable. I purchased a new one for the left side (aftermarket) cuz stupid stealership won't get one for months.. and it didnt come with that thick metal bracket that bolts up to the caliper with 2 bolts right under where the cable hooks up to the...
  14. Problems & Solutions RSX
    So the other day my cluster stopped working, no fuel gauge, speed, revs, temp, gas, door light. Only things that actually works is directional lights, hazard (same), high beams, now here is the tricky part. I disconnect it once and it turn back on like normal. But after I turn of the car one...
  15. Problems & Solutions RSX
    Trying to replace my old rusted calipers with new ones. Have no idea how to take off the emergency brake cable from the bracket on the caliper itself. If anyone sees this and knows how to remove the caliper completely please respond asap. I looked around for quite awhile, can't find anything...
  16. Problems & Solutions RSX
    Just replaced all 4 rotors and pads, the rear passenger wears unevenly, pad only touched outside half of rotor and not inside, is my caliper bad...? The wear on the other 3 is f
  17. Problems & Solutions RSX
    Hey people...first off thanks for reading. Pretty straightforward symptoms, my front right and back left wheels are doing almost all of my braking. They went down to the steel while the other two wheels still had 3/8” of pad on them. Also, i couldn’t get the calipers on those two wheels to go...
  18. Suspension, Chassis & Brakes
    So, i'm looking at oemacuraparts and notice there are two part numbers for the front brake pads. Anyone know the difference between acura part number 45022-SVB-A03 and 45022-SVB-A02? I was also thinking on getting brembo brake pads. Does brembo make brake pads that fit the stock 06 type-s...
  19. Suspension, Chassis & Brakes
    So I know that the Brembo ITR swap has been covered millions of times, but I recently purchased my own set just to find out I have fitment problems... So since when I searched this thing looking for answers for all of the questions i had. I didn't see anything about my problem, decided I would...
  20. Suspension, Chassis & Brakes
    Hi all, basically I want to upgrade the braking on my 05 rsx-s. However the AP brake kit was built for DC5R. The shop doesn't have any info on rsx-s, but their kit does fit dc5r and UK dc5 non type r. Can anyone help out to clarify abit? And what addition dc5r parts I need to get in order...
Top