Acura RSX, ILX and Honda EP3 Forum banner


  1. Bolt-On Basics: RSX Type-S
    So I’m wondering if it’s ok to Put on one of those small filters or just run it open. The tubing won’t fit..I’m just wondering if doing this will harm my engine in someway
  2. Turbo RSX
    Hey guys, I have a k24a2 with Borg turbo. Have a question, I got a breather can from a friend, how do I install this thing? It has no input/output, and there is a nipple at the bottom. I was thinking that one hose connects to the valve cover and other hose connects to the PCV? Where does the...
  3. Problems & Solutions RSX
    I just purchased and injen sri. I installed it on my base 06 rsx. Everything went good except the crankcase breather tube opening is too large. The intake says it is meant for an 02-06 base. Has anyone ever ran into this problem. Does anyone know how I can get a smaller tube to replace the original?
  4. Bolt-On Basics: RSX Type-S
    Tried searching many forums but couldn't really find anything on mobile. Looking to buy a k&n crankcase breather filter and need exact sizing. I believe the valve cover hole size is 5/8 in and need a filter with a nipple of 1.00 in diameter correct ? SIDE NOTE: I accidentally ordered a 2 in...
  5. Bolt-On Basics: RSX Type-S
    Please help I am trying to tuck or delete the two long lines running from the fire wall to the throttle body and intake manifold I know one is a Evap line but not sure what the other one is, was wondering if anyone has done this and or has pictures to help explain it to me!? I am also trying to...
  6. Problems & Solutions RSX
    I broke the breather tube on the airbox on my husbands 2003 RSX trying to replace the airfilter. Ordered him a new airbox cover (I'm a newb so no cold air intake for me, I just want to get him back to where we started). The new tube coming out of the airbox to fit is bigger and wouldn't find...
  7. Engine & Transmission RSX
    I have a couple K-tuned parts brand new I bought from Looking to sell. Valve cover breather filter and Idle air assist delete kit. I paid whatever they sell it for $35 per part. Looking to sell as a pair for $50. I'll take care of shipping n paypal fees to any US state...
  8. Engine & Transmission RSX
    For sale: Like new JDM valve cover. 100% authentic! I took it out of the box and put it on the motor sitting in my garag, never been ran. It is in perfect condition! Asking sold Clean gold painted valve cover. Cover and paint are in very nice condition. Asking $sold K tuned valve cover...
  9. General RSX Discussion
    Hey guys, just a hopefully quick question. Any type of searching I've done has only come up with the valve cover breather hose, which I know about. My question is what is that second, smaller breather hose for?
  10. Engine & Transmission RSX
  11. General Discussion EP3
    anyone know what size the valve cover breather hose is per chance? gona be getn a intake soon and mine looks like crap. that and is it possible to bypass the metal hose that wraps around it and if so what size hose would i need for that also? all help appreciated:banghead:
  12. Problems & Solutions EP3
    I don't have the small breather tube coming from my engine. I'm going to buy another one but Idk where it connects or like comes out of the engine.
  13. Bolt-On Basics: RSX Type-S
    i have a very basic intake and my friend installed it and the only two hoses the intake has are plugged in and the valve breather is not connected. im wondering if it should be i live where it does get pretty cold sometime and no garage thanks
  14. General RSX Discussion
    In my curiosity, I found that the breather tube at idle spits gas back out, and under load, sucks air in. Anyone know why that is? I understand why it sucks air in, but not why it ejects gas at idle. The location of the breather tube is here:
  15. Problems & Solutions RSX
    So I removed my Power Steering and am now running "MAN"ual steering. lol But I was told by a tuner shop and by some others that I should run a breather setup. So they told me just T into the hose looping the two lines and run a line to a reservoir and that will insure there is always fluid in...
  16. Forced Induction & Nitrous RSX
    Battery relocation bracket, fabricated by Fade2Black: $100, shipped with all fasteners... Custom breather tank with fittings for PCV barb and valve cover vent. Could possibly be adapted to fit other places in the engine bay but was DESIGNED TO GO WHERE THE STOCK BATTERY GOES: $80, shipped...
  17. Problems & Solutions RSX
    I broke the small breather plastic tube on the air filter box. Is there any solution to repair this? Thanks.
  18. Problems & Solutions RSX
    While coming back home from the store I decided to go practice a few launches since I finally installed my RBC manifold. Used the Launch Control(3,500) drove it hard til the end of 3rd I kept the stock 8000 Rev Limit. While I was drving I noticed alot of smoke coming from my hood. Parked the...
  19. Problems & Solutions RSX
    I just had a new transmission put in (again), and the shop that did it apparently lost the clamp for my breather hose and never re-connected it. I drive from pittsburgh to virginia and back, and did a total of 1,000+ miles without it connected. Yesterday I was cleaning up my car for a honda meet...
  20. Part Outs RSX
    Selling: - acura front and back badges. $25 for front and $15 for rear. Free shipping!! - Morosco oil breather - $35. Free Shipping!! - 02-04 Black stock rsx rims/tires 205/55/r16. 90%thread left. $300 (local pickup, or you pay for shipping) San Antonio, TX