Acura RSX, ILX and Honda EP3 Forum banner
brembos
1-20 of 98 Results
  1. Suspension, Chassis & Brakes
    Hi all, looking to do the TL type S brembo swap in the near future. I’m just wondering what size wheel spacers id need to clear either factory 05-06 type s wheels and/or the Mugen GPs. I’m planning to use the factory wheels in the winter months and GPs for the summer. Thanks in advance! Sent...
  2. Suspension, Chassis & Brakes
    Like the title says I’m curious if anyone here has ran TL-S brembos conversion from VisionAutoworks with 17x8 +35 grids WITHOUT spacers. I saw a guy fit the DC5R brembos, but nothing in regards to the TL-S brembos. Thanks!
  3. Problems & Solutions RSX
    Hello, quick question on brembo swapping my type s. I’ve been told it’s not as simple as just attaining the brembos from the dc5 type r model. Can anyone shed some light for me as to wether that’s true? I’ve been told that Apparently the TL models brembo brakes would fit more precise? Just a...
  4. Wheels & Tires
    I'm looking to a get a relatively cheap lightweight set of rims. I'm looking at the RPF1's and am hoping to get the 16x8 +38 offset, 73mm bore. I'm hoping to upgrade to a brembo setup next year so will these clear my brakes? I'd like to stick with 16 inch rims so I stay light but going with 8in...
  5. Canada East: For Sale & Want to Buy
    For those looking for a poor man's BBK setup, I have the following for sale: DC5 Integra Type R Brembo Brake Calipers Hawk HP+ Brake Pads (~50% life remaining) Stoptech Slotted Rotors (S2000 fitment) Russel Stainless Steel Brake Lines Pistons and all internal components are in good working...
  6. Wheels & Tires
    so i did the Type R Brembo conversion done and my 17x9 +35 wheels weren't able to clear the caliper without a 5mm spacer. I was under the impression that wheel spec would have cleared them and i am currently getting a lot of steering wheel vibration after i installed the hub centric spacer. I...
  7. Suspension, Chassis & Brakes
    Hello, The DC5 Type R Brembos on my car are only about 1-2mm from the rims (in front, of course). The clearance is pretty close to even from the top to bottom of the caliper; the shape of the inner face of the rims is similar to the outer profile of the calipers. The car will be driven on a...
  8. Suspension & Brakes RSX
    Like the title says. Comes with everything you need to run these calipers. Full set of RSX Type R brembo calipers Front and rear. Hawk HP+ pads front and rear. (>50 F, >80 R) s2000 front centric slotted rotors. all 4 stainless steel brake lines. No leaks or problems. clear is flaking on the...
  9. Wheels & Tires
    I'm doing a DC5R brembo caliper swap (s2k rotor route). Will 17x9 +30 offset RPF1s clear the brembo calipers?
  10. Southern California For Sale: Local Pick-Up
    Got a barely used pair of TL type s brembos powder coated Blue for the Rsx. Comes with stoptech slotted rotors basically new less then 300 miles on them. Asking $1100 for both let me know. Text for faster response 619-773-5611 located in San Diego
  11. Wheels & Tires
    Title says it all. Im in the process of searching for a set of wheels to replace my current set. I want to fill up my fender (I will roll them) but dont want to stretch my fenders, also dont want to stretch tires that are too small either, and at the end of the day the spokes need to clear my...
  12. Suspension & Brakes RSX
    I couldn't get the axel out so buyer gets a free dc5r axel. Calipers were media blasted and repainted, the hubs are original DC5R as well. Stainless lines included $700 local $780 shipped. Located in miami Florida. 786-510-0452 to text me for quicker replies.
  13. Member Show-Off RSX
    Updates! I am back lol. Because photobucket ruined the thread I'll try to bring it back to life. :fyea: My journey: Type S 04 bought the car with only one purpose work and school. But, my plans changed a bit!! And here is my pride and joy, and more to come. Simple enough in my humble opinion...
  14. Bolt-On Basics: RSX (Base)
    i have a full set of jdm itr brembo calipers.will they fit straight on to my base model.or do i need the knuckles as well? insight please.
  15. Member Show-Off RSX
    Hey guys this is my first showoff but I've been a member on Clubrsx since 2011 when I bought the Type S for my 16th Birthday. I couldn't have done this without the many people I met along the way. Had a bunch of different setups and many mistakes but I hope you guys like it. Currently...
  16. Member Show-Off RSX
    Hello crsx, thought it was about time to update my showoff thread. Ive had my 02 pwp type s for over 2 years now. I got it 100% stock. bought it for relatively cheap at 140xxx. it now has 186xxx. I plan on doing a k24a2 swap in it by next year. just gotta save up some cash. recently ive been...
  17. Suspension & Brakes RSX
    sold
  18. Suspension & Brakes RSX
    up for sale i got 2 different dc5 brembo brake setups setup # 1 - Freshly powdercoated calipers - fronts only w new stoptech powerlot slotted s2k rotors - $1000 obo ( needs new seals and pistons will bolt straight up to an RSX no modifications needed) setup#2 - Complete dc5 typer brakes, lower...
  19. Wheels & Tires
    Hey guys im planing on getting some enkei rpf1 17x9 +22 with 215 45 tires. My question is will they clear the dc5r brembos caliper? I did search but couldnt find anything. Thanks
1-20 of 98 Results
Top