Friday night my car got broken into ( not sure how they got in without breaking anything) and I dont have full coverage so I got to pay out of pocket. They took my stock ecu, my quick release steering wheel and shift knob. What is the process of replacing the ecu? I've been told that I need to...

So there’s this air hose (see picture) on my 04 rsx base, going from my air box to a hose on the engine. I’m not exactly sure what it is and if it’s a problem or not. My car has been running fine but I’m not sure if I should get it fixed ASAP. It’s circled where it’s broken off at.

In pulling off the small 8mm hose with my pliers, I managed to crack the vacuum T-fitting. I can't seem to find what part this is, any leads? Broken Intake Fitting I've gotten close to what I need on Acura Parts Warehouse, but hit a dead end. At the below link, I need what's just beyond part...

As we all know, photobucket was taken over by a new CEO. With him in the hot chair, the links for all of our photos on the DIY guides and showoff threads have not been working. If you have Google Chrome, you can add this plug-in to make these photos work once again. Admins you may want to...

Hello guys, someone (probably neighbor) just recently smashed my driver mirror and I'm wondering where I can get an identical part for an 05 black RSX type s if that matters. Controlling my anger as I post this lol.

What's up CRSX community? Thought I would share this quick fix with you guys since I didn't find much on the topic when I was fixing it myself. The problem I am addressing is a broken tab on the back of the low beam headlight shroud that holds the bulb adapter into the back of the headlight...

Ok guys I need help asap. I'm most likely going to be buying some itr sides tomorrow. Only problem is the last 2 tabs in each side are broken. Is that fixable and If so how? Please help out asap Sent from my iPhone using Tapatalk

Ok so I'm pretty pissed right now. My mechanic installed the race header and exhaust on my car knowing my front and rear mounts were broken. He was going to put the inserts but instead said he'd rather me have some new front and rear mounts... he told me that after he had installed the header...

Evening guys, I drove back home after my studies and heard a weird oscillating noise. Got back home and found my air filter and half of the piping gone. The other end is still intact. My question is can I use it as a short ram intake? I don't have the knowledge yet with the intake system, so...

This has been a frustrating mystery for me and seemingly my mechanic and I will do my best to describe it. I have 2 "temp sensors" broken on my car. 1 is located on the drivers side, where the transmission & engine bolt together, under the harness. Its a 2 wire sensor. The other is on the...

I have only found one other person this has happened to? Clutch was replaced last week and shifting was feeling funny. I was driving along then suddenly I couldn't shift and the shifter would only go forward and back, no left or right. It took about and hour to figure out but the cable had...

LOOKING FOR: cracked/messed up/broken bumper (05-06) with the exhaust area INTACT. Scratches and bad paint is OK, just as long as it isn't completely melted and warped. I'll be experimenting with making Exhaust Heat Shields so the better shape it's in, the better fit Looking to have seller cut...

My front bumper on the right side is detached from the fender. I know this is a common issue with RSX's, so I imagine someone has fixed this without having to replace the whole bumper. (I was thinking of epoxying it) Thanks for your ideas

So I just broke ~11k miles :hb: and now I think I want to mod the car slightly. It is an 06 Type-S. I only really plan to do 2 things, a short ram and a 2.75" cat back. Can I get away with these prior to doing a reflash? If I only plan on doing these two things (at least for quite some...

So I went ahead and bought the MTEC race shift springs. I heard it was a simple install so i said why not and went ahead and attempted. During the reassembly process, i broke one of the 4 10mm bolt by over torquing i :rest. Here are some photos of whats left.

Sup guys, got an EP3 as my first car. Don't know much about car mechanics but I'd be more than happy to learn. I got a couple of mechanic buddies I hangout with and do the work for me as I learn. :fistbump: I need general opinions from the forum as I might need a transmission/clutch replacement...

My Revo short shifter has given me about ten years of faithful service, including daily commutes and a good number of track days. I know it has a reputation for being a little fragile, but it was never a problem and I loved the way it shifted...That is until yesterday: Here are pictures of where...

Hey guys, I need haaaaalp! The back story is when I first got my 2002 RSX Type S it had stock headers, with the stock cat and a catback exhaust. The CEL light came on soon after I bought it, and it was a code for catalytic converter deficiency and I was told that my catalytic converter was shot...