Search Results for ‘budget’

Hey y’all so i’m looking into exhaust options for my 05 type s. I’m looking for something budget friendly that sounds clean. Nothing too loud. i’ve seen people run universal mufflers if anyone has recommendations lmk. Thanks!

After buying my 06 RSX Type S I took it to my mechanic to check it out and he said that the crack shaft had too much end play. From the looks of it my engine is going to be seizing up soon. I no longer drive the car. I just need some advice on what to do. I was looking at putting a k24 in...

Car is 2006 RSX Type-S with 179k miles on it. This is a recap of stuff I had to buy and what I did to install this cheap kit. After having it for a year with bolt-ons, I decided to send it and get a turbo kit. I was never planning to spend much money so I went with the EMUSA kit. Ebay and...

The shocks on my 05' RSX type S are shot and I need to replacement. I've only got about $500 to spend on them and im trying to figure out the best path to replace them at that price point. Im open to coilovers or anything like that but I dont want to lower my ride. Alot of aftermarket parts seem...

heres the deal. Im not looking to spend crazy money, and im not looking to make insane numbers either. my power goals are 250 to 270whp..here are the parts so far Cheap turbo kit from ebay: 800 bucks kpro:700 bucks walbro fuel pump: 50 bucks fuel injectors: 350 afr and boost guage: 100 (try to...

We just spotted an Autoguide.com favorite 1/2" drive torque wrench on sale via Amazon.com. The Tekton 1/2" drive torque wrench is rated for 10/150 ft.-lb. and features sturdy all metal construction. With the current 29% discount, it's priced at only $28.50! Read More About The Torque...

We just spotted an Autoguide.com favorite 1/2" drive torque wrench on sale via Amazon.com. The Tekton 1/2" drive torque wrench is rated for 10/150 ft.-lb. and features sturdy all metal construction. With the current 29% discount, it's priced at only $28.50! Read More About The Torque...

This could be a slow build but I'm in college right now so it is what it is. My plan is a clean simple build for now (need a reliable dd) and building a k20/k24 somewhere down the road. Plans: Mods- Kpro Cold air intake Header Motor mounts Hondata IMG Rbc with throttle body/ adapter 2.5in...

Hey guys, So my I've been looking around alot at other cars in the market and I feel like I like my RSX better than most cars out right now. I have about 10k saved up and I wanted to do something to my RSX so I can keep it for a long time without worrying about it as well as being able to keep...

Okay, I'm sure there is no real clear-cut answer to this, but I am getting a Race Header, and I found a bunch of options all around the same price. Here they are: 1320 Performance Header...

Hey all, so I decided to start a thread documenting my modifications and fixes for my new ep3. I am trying to keep it under 1k-2k not counting maintenance. This is my backup car/bad weather car and really I don't expect to get what i put into it back so I am keeping it really cheap :)...

Hello everyone! I've been lurking on the forums for a while and decided it was time to make a build thread and share my story. I'm an automotive student and work a low paying job so progress is slow and steady. Going back to 2014 I had an EG Civic which needed a lot of suspension work and sat...

I've had the car for a while but I've finally got to the point where I feel I can do a show off. I first bought the car back in 2014, while I was away Pea combining, searched for two months before I found the RSX I wanted. It was nothing close to stock but not to any extent of where I couldn't...

:confused::confused: How much am I gonna end up spending if I supercharge my stock EP3 with the stock K20A3?

hey guys, im new to this forum, i need help with a few questions on a build im planning to do, i got a Jdm k20A head already mated to a K24A1 bottom block that i bought from a seller, it will be going into my ep3r, i heard i would be limited to rpms because the bottom block is limited to...

Most recent photo Progress Starts Below ------------------------------------------------------------------------------------------------------------------------------------------------- Got the car for my birthday ( 16th ) Dad bought the car and I've been paying for everything else since...

in my desperate attempt to be one of the cool kids, I figured I gotta get me one of these show off threads too... so here it is I got this car so I have something to use as a cheap track car. the goal is to build it as cheap as possible without buying crap parts. I also wanted a track car...

I am gonna work overtime this summer while I'm taking summer classes to graduate early. Was probably gonna spend about $2000 total. $300 obx v3 $300 yonaka 2.5 $60 throttle body spacer $300 RBC $150 70mm throttle body $6-800 on custom ktune Do you think this is a decent decision to put my money...

hi all, im looking at doing a sound system upgrade myself on my honda integra type-s ( im from australia so we got things a bit different here ie HU is a std double din stacker) my current list is as follows: Alpine CDE-W235EBT(already have) Alpine KTP-445A dynamat trunk kit honda to alpine...

I recently inherited my brothers 05 rsx-s that has a rod knock. I want this thing running mean for him and have decided I'm going to rebuild the motor. I know a lot about cars and how everything works but this is the first time I'm actually getting something built and don't have any experience...