Acura RSX, ILX and Honda EP3 Forum banner
bushing
1-19 of 182 Results
Advanced
  1. Suspension, Chassis & Brakes
    Long story short, i really need the template for the caster increasing control arm bushings if anyone has it laying around still from theirs. My kit doesn’t seem to have it. Thanks in advance! Sent from my iPhone using Tapatalk
  2. Suspension, Chassis & Brakes
    Has anyone here changed out the rear upper outer control arm bushings? It’s the bushing that is in the top of the knuckle or spindle whatever it’s called. My question is I can’t tell if there is a metal sleeve in there or if it’s just a rubber bushing. My new whiteline bushings do not have an...
  3. Suspension & Brakes RSX
    Aluminum jdm dc5r front lower control arm - 200$ + shipping
  4. The DIY Garage RSX
    If your cable shifter has a lot of play fore and aft, its bushing has deteriorated and there is no part from Honda to repair it unless you want to replace the shift cables. This DIY repair replaces the bushing in the existing cable. Noisy shifter with lots of play: https://youtu.be/NOrjAsBrkRI...
  5. Engine & Transmission RSX
    I've added a few more parts, this may need to be moved to part out section idk I have a complete set of RED 60A Innovative MM; front, tranny, and both sides. Installed on car for approx 4 months. Reviews on these mounts can be found on KseriesParts.com. $225 shipped They are a little dirty...
  6. Suspension, Chassis & Brakes
    Hi I was wondering if anyone has replace their rear coiloevers bottom bushings before? Mine seized onto the cars trailing arms and I need new ones. Will Energy Suspensions work? Or oem? I tried contacting the Coilovers company but they only offer to repair. Anything will help Thanks
  7. Problems & Solutions RSX
    How's it going Rsx lovers? First and first most I want to say thank you for the awesome peeps in the forum for helping me with my previous thread... That being said, I have recently replaced my power steering pump hose and the steering is fine now but the only thing that's effecting the car...
  8. Suspension, Chassis & Brakes
    So I noticed that when the coilovers are installed on my car, the shaft coming from the shock doesn't come through the middle of the top hat. When I put it through the bushing, the shaft forces the bushing over to one side and makes it look like the bushing isn't big enough to fit... did I have...
  9. Northern California For Sale: Local Pick-Up
    Sold
  10. Suspension, Chassis & Brakes
    So I got my SuperPro bushings today and I'm not quite sure how to install them the "Front bush assembly" shows the orientation like I have it setup on the left. but the 2 pics I found of these installed (well one installed and one almost installed) had then arranged like I have on the right...
  11. Bolt-On Basics: RSX Type-S
    wanted to know if any of you guys have changed your oem shifter box bushings trying to decide on getting hybridracing base bushings or k tuned top mount bushings and the feel difference between these two :run:
  12. Suspension, Chassis & Brakes
    is hardrace the only company making these bushings for the rsx http://www.buyhardrace.com/product/hardrace-rear-trailing-arm-bushings-02-06-rsx-dc5_131.html i need this replacement, went on the acura parts website, does not even list this item. energy susp does not include this bushing
  13. The DIY Garage RSX
    This is a quick and cheap fix for those who currently have some vertical/up and down play with their shifter. I believe this solution was found in an old post in another thread but I thought I would make a proper DIY for it. Symptom: Shift lever has vertical play/free movement in any gear an...
  14. Bolt-On Basics EP3
    Hi All, I am looking to minimize the engine movements, I don't want to use the standard damper. I saw few engine mount bushing and I want to ask here is somebody have experience with them on the EP chassis. my engine mount are new but I want something more then stock, ant not so expensive as...
  15. Want To Buy or Trade RSX
    I am looking for Hardrace (complete) bushing kit Hardrace motor mounts Hardrace balljoints (02-04) New - not used
  16. Suspension, Chassis & Brakes
    Looking to replace my old worn rubber bushings on my spc camber kit. I would like to replace them with poly bushings but I can't seem to find any. Can anyone help me out haha?
  17. Problems & Solutions RSX
    Hi, So i'm putting in a new clutch with my new motor in my car so i figured why not replace the pilot bushing as well. The problem is i can't get this freaking thing out of the crankshaft/rear main seal thing that the flywheel bolts too. I've tried packing it with bread(yes i know, but i...
1-19 of 182 Results
Top