Acura RSX, ILX and Honda EP3 Forum banner
cam
1-18 of 500 Results
Advanced
  1. Bolt-On Basics: RSX (Base)
    my a3 has been boosted for over 25,000kms of dd use with no VTC issues at all it was just very sluggish in the top end like 5500 - limiter was painful so i decided to switch out the horrible 3 piece plastic intake manifold for a RBB 2 piece off the floor and put A2 cams with 2 sets of a3...
  2. Want To Buy or Trade RSX
    wtb two cam gears from k20a2, z1 or z3. both intake 50vtc and exhaust and the pulse plates
  3. Vendor Deals
    We've found another solid deal, but time is super limited on this one! The Vantrue N2 Pro Dash Cam is packed with features including 1080P recording quality, front and cabin-facing cameras, infared nightvision, motion-activated parking mode, and more. Regularly priced at $199.99, it's marked...
  4. Vendor Deals
    We've found another solid deal, but time is super limited on this one! The Vantrue N2 Pro Dash Cam is packed with features including 1080P recording quality, front and cabin-facing cameras, infared nightvision, motion-activated parking mode, and more. Regularly priced at $199.99, it's marked...
  5. Vendor Deals
    We've found another solid deal, but time is super limited on this one! The Vantrue N2 Pro Dash Cam is packed with features including 1080P recording quality, front and cabin-facing cameras, infared nightvision, motion-activated parking mode, and more. Regularly priced at $199.99, it's marked...
  6. Bolt-On Basics: RSX Type-S
    Fortunately for us, cam selection sucks. The Honda K Series community suffers from the luxury of abundance. This worksheet is an attempt to comprehensively collect all available options for the K Series and an approximately standard method of comparison.I was forced to take some liberties and...
  7. Problems & Solutions RSX
    Hello Club RSX.. I bought a k24a4 with tax rbb2 and PND cams.. well I opened her up and started looking a d found what looks like p2v damage on the last piston away from the cam gears. Anyway I have a type s with I think SI motor overheated not currently in my garage I'm looking to put in. A...
  8. All Motor RSX
    Hello everyone. I just got another RSX type s , I had one about 6 years ago but never mod like I wanted because budget and life.. now I have a better budget and garage to spare space on. I would like to build is as an homage to my younger self of some sort. Anyway the RSX was 1700 bucks runs and...
  9. Engine Building & Design
    Is the spacing between the low and high lobes the same with 3 lobe cams as with 2 lobe cams? In other words, is it possible to use 3-lobe intake cams with 2-lobe rocker assemblies?
  10. All Motor RSX
    I am in the process of building my first k24/k20 build. I have a question on my cam options I can go with. Will I run into valve to piston problems? I intrested in getting the skunk2 stg.2 Cams. My build info: K20z1 head with Supertech springs upgrade 05 TSX k24a2 block with Supertech 12.5:1...
  11. General RSX Discussion
    Read more about the 5 Reasons You Should Drive with a Dash Cam.
  12. Part Outs RSX
    Looking to buy some parts, located in north Jersey and travel to the Bronx from time to time. Feel free to send a text 609-276-6360 Kpro Arm rest Ssm front/rear lip Rear strut/pillar bars, side bars New coilovers Open to any seats as well Brakes, types s calipers or better Rota slipstream rims...
  13. Problems & Solutions EP3
    Hey clubep3, I'm in the middle of replacing my timing chain and I can't get my cam gears to line up properly. The problematic cam gear is the exhaust cam gear. I was told the key/pin could be messed up and I should try taking the gear off by some coworkers who build engines. So I vise gripped...
  14. Problems & Solutions EP3
    n/m
  15. Want To Buy or Trade RSX
    Looking for blueprint stage, 3 intake cam Lmk If u have Thanks
  16. All Motor RSX
    I'm looking to get some above average power out of my Rsx. Currently my setup is a 06 k24a2 longblock, Clutch, Megan header, 3-3.5-4inch CAI, 3 inch exhaust with no restrictions, Kpro, RBC. On this setup I made 217/175. Unfortunately I was tuned open header. Now I'm looking to spend around...
  17. Engine & Transmission RSX
    RBB Cam gear Asking 50 Shipping +5 -replaced this for an rbc cam gar for my k24 -perfect to make a 45* gear AEM V2 Intake Asking 150 Shipping +25 Clean, used only in winter Comes with filter *pics will be up tonight
  18. Problems & Solutions EP3
    So i replaced both cam sensor and im still getting p0341. Timing chain stretched? What about crank sensor? Your help is much appreciated. Car is 2002 with 227xxxkms (canadian eh!) not sure if previous owner already changed timing chain. Thanks in advance fam!
1-18 of 500 Results
Top