Acura RSX, ILX and Honda EP3 Forum banner

Discussions Showcase Albums Media Media Comments Tags Marketplace

1-19 of 500 Results
  1. Problems & Solutions RSX
    Hey everyone, feel free to send me the link to the other forums if this has already been answered but I’m going to go a little deep with this question so bare with me please. I just bought my rsx about a month and a half ago, and this is my first time every modifying a car. My first...
  2. Exterior & Interior RSX
    alright so this is how i’m looking rn with 17s, i’m on lowering springs and i can’t really afford coils, so would it look retarded to throw some 15mm spacers and then camber it to like -3<? or would it make the fitment nice?
  3. Canada East: For Sale & Want to Buy
    Does anyone have front camber kit, rear camber kit or inverted tie rods to get rid of? If so, send me a message. I am located in Toronto Thanks
  4. Suspension, Chassis & Brakes
    Wondering if anyone here has input on my current issue in the new to me 02 RSX Type-S I have. I spent some relaxing wrenching hours this weekend replacing my front ball joint (first time ever pressing in and out a ball joint, shockingly went smoothly!). This morning I brought it to get an...
  5. Problems & Solutions RSX
    Hi! Long short story I begin working on my RSX late last summer. I decided to keep the old thing and redo a entire brake and suspension swap with new parts. The only thing I didn’t replaced were my ingall rear cambers..... Soon to regret after installing everything I ran into a problem with...
  6. Suspension, Chassis & Brakes
    Hi! Long short story I begin working on my RSX late last summer. I decided to keep the old thing and redo a entire brake and suspension swap with new parts. The only thing I didn’t replaced were my ingall rear cambers..... Soon to regret after installing everything I ran into a problem with...
  7. Suspension, Chassis & Brakes
    Im trying to figure out which parts to purchase to achieve the tilted look for my wheels as seen in photos attached.
  8. Suspension & Brakes RSX
    Brand new, never installed. $75
  9. Suspension & Brakes RSX
    $60 shipped, new never mounted as I sold the car and the new one already had them. They are silver and will post a pic when I figure out how otherwise pm me and I'll send a text. In box with everything sent with it. Thanks
  10. Suspension & Brakes RSX
    The 0857 Inverted Tie Rod Ends have been sold to Mr. Martinez. I also have a pair of Truhart rear camber arms for sale. They've been modified some for a little extra adjustment. 90$ shipped! :fistbump:
  11. Suspension & Brakes RSX
    SOLD New in box HardRace rear camber kit with harden rubber bushings. HardRace part number 6342. Works with RSX DC5 / Civic EP3 Listing on eBay: http://www.ebay.com/itm/HardRace-Rear-Camber-Kit-6342-/182592608372?hash=item2a835e1874:g:OB0AAOSwaEhZJ6FZ&vxp=mtr I purchased these in 2015 and...
  12. Southern California For Sale: Local Pick-Up
    I have new eibach pro alignment kit for rsx/rsx type s. Never used still in plastic bags. $120 I also have new strut top mounts for RSX type s $40 Let me know if you have any questions 310 753 8017
  13. Southern California For Sale: Local Pick-Up
    Selling my set of track wheels. 17x8 BBS Forged wheels for evo 9 MR/SE. Wheels are in 7-8 in condition. 2 are hypersilver, other 2 are powdercoated to color match. It's really close and hardly noticeable. Picture shows the front powdercoated to match and rear original. Won't be able to tell if...
  14. Problems & Solutions RSX
    So I just bought front camber bolts (previous front end damage has the passenger side at neg 4 while drivers at 0 lol) but I got that dialed in problem is my rear camber arms. I'M trying to keep them at neg 1 ish. But after a few minutes of driving they always drop back to neg 2.5 to 3. Anyone...
  15. Suspension, Chassis & Brakes
    So I went to go get an alignment done on my 2002 RSX 5 speed and they can only do the left front wheel and the right rear because apparently this bolt has seized up and they can't remove it (see nut circled in red). The front outer tierod nut has seized up as well. Finding the outer tierod is...
  16. Suspension, Chassis & Brakes
    I just installed some coilovers and while I was at it the front SPC camber bolt. I am pretty sure I put them back in the same orientation as I took them out, which is from the front push in towards the back with the nut on the back closest to the brake caliper. But in my PDF shop manual, it...
  17. Suspension, Chassis & Brakes
    Installed new spc rear camber arms. About 50 miles on them right now. Do any of you that have spc or similar camber arms have bushing flex? Bushing is getting pushed in. Camber is set at "-1", toe at "0". Take a look at the picture. Is this normal?
  18. Suspension, Chassis & Brakes
    Unused, still in box Megan Racing rear camber kit. $75 shipped.
  19. Suspension & Brakes RSX
    Racelands brand new, still in box for $300. also have Megan racing rear camber kit still in box for $50 if you want to buy with coilovers. $80 if you just want camber kit.
1-19 of 500 Results
Top