Search Results for ‘checklist’

Hey guys! I recently found out my k20a3 has a cracked block, bought another k20a3 from an auto wrecker (guarnteed under 200k kms with a warranty), and swapped it in my garage. I'm preparing for the first start up, and I'm having trouble finding what to do online. In my searches, I keep...

I've searched multiple forums so I have become aware that it is more "tricky" to put a k20z1 motor into older an older model RSX. Normally people just say "get a k20a2 and avoid the hassle". However, I recently found a donor car that was in great condition minus a small front passenger side...

My 04 Type S has close to 250K miles and it still drives, however i was able to find an used K20A2 with less than 100k miles for a decent price. This would be a straight swap with the same motor, i got a few questions. 1) Which way is easier to take the old motor out. Drop it along with the...

Going to install my RBC in the next week or so and just want to make sure I have everything before I go head in. Used RBC (I cut with a dremel, still need to remove some material once I get some new bits) Hondata k20a IMG 7x new Honda bolts (Figured why not?) Ktuned RBC adapter (Comes with...

Never had much much luck last time I posted. Could really use the advce. I'm swapping in a k24a2, already got the block, the crv mount. Do I need the type s throttle body? Or will my a3 one be fine? I currently have a 5mt, that will suffice or should I get a 6mt? Also I wi have kpro put in right...

I have kpro and the long blOck ordered. I have gotten the type s throttle body FrOn the a2 and the crv mount from the dealer. Am I good to go? anything else I need? Or that you guys would recommend?

Okay recently I have been seriously considering purchasing an alarm system with remote start, and I am just wondering if anyone of you guys can help me out by making sure I have everything before making my final purchase online. So this is what I have gathered so far, this is just to get the...

I've always been an All Motor guy, but I want to try some F/I. One of my problems is that I have IPS K2 cams in the car and I was wondering how that would run on a turbo setup. Anyway I know there's a ton of stuff that I'd have to buy for going boost. I'll list what I have that can be used...

Hey guys I am putting together a turbo kit and I was wondering if I am forgetting anything. - Greddy turbo, downpipe, manifold - 450cc Injectors - Greddy Intercooler and aftermarket piping - BOV flange pipe - BOV (Which one, I don't know what one I want yet) - Turbo-fast Stainless Steel Oil...

What I have so far... Motor: K20A2 Head Port and Polished by Head Games IPS KME Camshafts Manley Valves Eibach Springs and Retainers Crower Rods CP Pistons K24A4 Block bored to 87.5 K20Z1 Fuel Pump and Oil Pan -K-Pro for 2005-2006 because my DC5 is a 2005 -AEM Wideband UEGO -Injen Cold Air...

I have a 2004 Base Auto, and I am looking at puting a turbo on it. I was wondering if anyone could tell me what i would need to change out on the car so that I won't have to buy a new motor 6 months after i put the turbo on. Also if there are any recomendations for what I should change out to...

my friend just bought a semi used 5000k HID kit from a local guy in my area. they both have an rsx. personally, i dont think i'd buy a used or semi used HID kit. and since i plan on getting one soon, we're gonna try and install it. but before we attempt this, can anyone give me a checklist of...