Sold my car (2002 Type S) and looking to get rid of some odds and ends. Make me an offer including shipping. Everything is new and unused unless noted, most items come in original parts package. A lot of these items were ordered from Del Ray Acura parts and include their part # for reference...

This method would be another applicable solution to our cars for someone that doesn't want to spend too much money on. This method cost me $3 for sand paper and $13 for the product from amazon. Clear coat was shot and peeling on multiple panels from exposure. I hit the paint with 1500 grit wet...

so i did the Type R Brembo conversion done and my 17x9 +35 wheels weren't able to clear the caliper without a 5mm spacer. I was under the impression that wheel spec would have cleared them and i am currently getting a lot of steering wheel vibration after i installed the hub centric spacer. I...

Sold.

I'm doing a DC5R brembo caliper swap (s2k rotor route). Will 17x9 +30 offset RPF1s clear the brembo calipers?

wts 05-06 retrofit headlight with TL Projector clear lense. One of the top tab are broken on each thats bolts to the corner of the car. Your headlights will look exactly like it is on my car. 35w hid and morimoto 4300k bulbs included $250 obo Pm for photos!

Just cleaning out some old/new parts that I've bought in the past with anticipations of using and ended up going a different route. All used parts are functional! If they're not functional to me, I wouldnt resell it to others... Look to sell locally first. Will ship as a last resort but could...

the clear lens cost 40 by itself plus spacers. the tsx projectors, one is from a 2014 and one from 2015. i will not seperate the projectors unless it was a good offer. 60 bucks shipped.

CLEAR BLUE SKY: PRIME TIME AN SCCA NATIONAL GTA ROAD RALLY Saturday, September 12, 2015 Clear Blue Sky refers to our hope for a beautiful day for a drive in the country. You will start in Decatur, Texas, take about a 135-mile drive on the beautiful paved roads of Wise County, many in the LBJ...

Hey guys quick question picking up a set today of rpf1 17x9.5 +38 with 245/40/17.. What kind of spacer am i looking at to clear the rear trailing arm? Any idea?? I know i will have to roll and possible pull fender with atleast neg camber of 2.5-3 .. Need advise on spacer ..5mm or 10mm ??

$130 shipped. Due to the lens thing, I went ahead and order tsxr clear lens with spacers. So I updated the price to reflect it.

for sale i have a few parts from rsx that i don't need anymore , located in San Diego California but willing to ship everything is OBO and can give better price if u buy more than one thing call/text (858)248-9637 -Omar -SPC front camber kit (used for only a week) - $20 shipped -(4) hubcentric...

for sale i have a few parts from rsx that i don't need anymore , located in San Diego California but willing to ship everything is OBO and can give better price if u buy more than one thing call/text (858)248-9637 -Omar -SPC front camber kit (used for only a week) - $20 shipped -(4) hubcentric...

Let me know what you got, the cheaper the better. Everything would need to be shipped to tallahassee, FL. 32304. Thanks.

Hey everyone. I was experiencing very bad ticking and loss of power, and found that my cams were galling on both exhaust and intake side. I don't have funds for Kpro, so I just bought Stage 1 Skunk 2 cams. Installed them and they are perfectly in time and everything, I just have a quick question...

So I searched for this up and down with no luck. The other day I was under the car during my Coil Install.... which went really well by the way. As I'm looking around I notice tiny little drips at the corner of the oil pan. Fluid is completely clear/transparent. I'm not sure where it's coming...