Search Results for ‘clearing’

Hello guys! I know there are many DIYs of this but this is my version! Hope y'all like it. Please subscribe and thanks for the support...??? https://youtu.be/Fj-CZspkeks

Again, some items listed down are either new or mint condition. Open to fair trades for the ff ammo ONLY - .223 / 9mm / .45 acp and .40s / scopes / XDM mags But feel free to throw IN REASONABLE offers but please no lowballing. JL AUDIO microsub twin - (I believe this was from the power edge...

All parts are for an RSX type S unless states otherwise..... AEM CAI (blue) w/ washer bottle and pre-filter - SOLD Winter tires on steelies, both tires and rims are almost brand new only used 1 winter. "Trac-Max" snow tires 225/45/17 - SOLD EP3 transmission - $300 (not sure how many k's the...

So, i decided to remove the tail light tint on my car by sanding and polishing. I had to use a 200 grit to remove the tint, as it had so many layers of paint. I didnt use any other grit sand paper and then applied meguiars plastx, but it still seems hazy and scuffed. What can i do to make them...

hey, been checking around and searching for a thread that post on which wheels clear or need spacers for spoon calipers. cant seem to locate one. can someone post the link if clubrsx has one? thanks !

PWP OEM mini side skirts (No Cracks or Damages): $100 for both sides Mugen Civic Type R Shift Knob (6 spd) Mint Condition (comes with locking nut) $80 pics are on their way. prices are firm. prefers local sale (buyer will pay for shipping costs if not local sale). email [email protected] is key

So I finally got around to installing my injen CAI and everything went smooth until i finished up. At first the tube didnt clear one of the shifter component. I can shift into all the EVEN gears but not the ODD ones. The weight/knuckle (idk what it is) needs to push up and forward to shift into...

Im cleaning out my garage and found some parts that i dont need or use. just PM me offers for the parts you see and need. Im willing to ship at buyer's expense. parts are: stock type s brake calipers with stock lines (x4 got two set) will fit base model also ONE SET SOLD ALREADY stock type...

Difficulty: 0/5 Time: <1 minute One misconception your average Honda/Acura owner has is that the Maintenance Required light indicates an actual problem with the car. It doesn't. This light is programmed to appear on your dash after so many miles since you last took it in for service. I have to...

Im cleaning out my garage and found some parts. Here they are. I paid $1600 for these HKS coilovers.. They have been sitting for a while. You can really lower the EP3 with these. RSX tie rods are included. They are boxed and ready for shipping. $700 shipped Remember these are NO china junk, they...

Make Offers please no lowballing but doesnt hurt to ask. willing to ship at buyers expense but prefer local pick up RSX List Driver side spoon blue with side marker hole fender denso oem radiator new 02 ITR taillights 2 sets bolt on to stock housing projectors. ITR prc intake manifold...

ok so i am tryin to get the warranty for my car to fix it. the car was over reved, idk when and idk how. the ecu said that it was reved up to 10k rpms. i just need to know if the ecu can be cleared some how. i already tried to reset it and that didnt work. idk if i could bring it to a tunning...

This is really doing my head in, I did the ghetto way of reading what code is throwing the CEL via the 4-9 OBD connector trick and it was 41. Comparing the code it was my o2 sensor, which I brought and replaced. The old sensor made the exhaust smell like sulfur and eggs (too rich etc) and the...

Here are the links to everything: f/s: rsx rear caliper rebuild kits OEM f/s: 02-06 rsx A/C line f/s: rear wiper motor assembly complete fs: fender liner & fairing & door garnish f/s: rsx valve spring retainers f/s: Pulley, timing belt drive f/s: tsx 04-08 power window...

I have a 03 RSX Type S w/ Bose system and already upgraded the HU with a JVC KDR800 using a Metra harness. I did not by-pass the Bose stock amp. My plan is to replace the factory speakers (just the front) and run an aftermarket amp. I've seen it mentioned enough that rear speakers are a waste...