Acura RSX, ILX and Honda EP3 Forum banner

clutch

  1. Exedy Stage 1 clutch 08806

    Northern California For Sale: Local Pick-Up
    I have a used Exedy stage 1 clutch for $50 dollars. It still has plenty of meat on it. I switch it out for a different clutch. It include the disc, pressure plate, and throwout bearing. This can fit a 2002-2006 type-s or a 2006-2011 Civic si. Located in bay area
  2. Clutch change difficulty?

    Problems & Solutions RSX
    How hard is it to drop the transmission on a 2005 RSX-S? Compared to an Integra or Civic (takes me about 4 hours)? I think the pressure plate is bad or a spring popped loose. Went to SF last night and barely got home. Feels like the clutch only goes in halfway. Got a quote for $900, so that's...
  3. Idle drops when clutch disengaged and braking

    Problems & Solutions RSX
    Hey guys, new to the forum and rsx's, actually never owned a honda at all before. I've done a fair bit of searching and so far I plan to clean the IACV and throttle body. I'm reasonably mechanically inclined but don't know alot about tuners, more of an oldschool non computer type guy. Anyhow, I...
  4. Car won't start when clutch is in all the way on a cold start

    Problems & Solutions RSX
    When i have the clutch peddle engaged all the way to the floor especially on a really cold morning , it won't start but if i release it just a little it will actually crank. Any help would be appreciated.
  5. Clutch work

    Transmission & Drive Train RSX
    Ok soo looks like imma be needing a new clutch ???? i wanted to know what would be a good price to pay for the work. I live in so cal(riverside area) and i just wanna make sure i dont get ripped off by a shop. Soo whats the going rate for the install?????? Also im going stage 1 or 2 clutch,what...
  6. Noticed a hole in bellhousing after clutch change.

    Problems & Solutions RSX
    So I changed my clutch out and I just noticed a hole near my passenger axle...not sure what to do about it? The hole is the darkest area on the pic, it's about an inch long by maybe a 1/4 inch wide. Also noticed drops of oil at the flywheel inspection plate, at first I was thinking I screwed up...
  7. Having some whining releasing clutch into gears at lower rpms and some gear grinds.

    Problems & Solutions RSX
    Ok, so I have an 06 Type S with AEM CAI, DC RH, and Kpro.. So firstly, I started hearing a little "whining" noise when releasing the clutch at lower rpms when accelerating from a stop or in lower gears. Soon after, I have been having some gear grinding and trouble shifting into gears, especially...
  8. Competition Clutch Stage 1.5 w Light Flywheel

    Transmission & Drive Train RSX
    Due to unforeseen circumstances it's time for another clutch. Anyone have recent experience with this setup? I have a few mods but nothing serious, car is a DD. I am curious about the lightened flywheel which is a tad lighter than the DC5R. Since it is a daily and my daughter is mostly...
  9. Clutch Replacement or Master Cylinder or...

    Problems & Solutions RSX
    I just got a 2006 RSX. During the short pre-inspection my mechanic said the clutch fluid was low but found no indications of leaks. Without digging deeper, he's explanation was that the clutch was worn and might need replacement soon, but who knows when. My 17 year old son drives it and he's...
  10. PSA: Cheap em2 clutch master cylinder

    Problems & Solutions RSX
    I can't seem to post in the discussion thread so I don't know where else to put this. Honda and many other sites sell the Em2 clutch master cylinders for $170+. I recently purchased a brand new one from ebay for $60 and it works great. It is Nissin so I'm pretty sure it's made by the same...
  11. Bled Clutch No air - now pedal is on floor.

    Problems & Solutions RSX
    A week ago I went to drive and the car would not go into first. After some time I ended up starting in second, barely. I pulled into the gas station I just left and started researching. My conclusion is it is probably the CMC or CSC as the car shifts fine when engine is off. Also my clutch was...
  12. Clutch pedal

    Problems & Solutions RSX
    I've been having a problem that occurs randomly with my clutch pedal. The car still drives fine but sometimes the clutch pedal with be dead for the first half until the engagement actually starts. Sometimes it will stay down and I have to bring it back up with my foot. Again this is random but...
  13. Clutch release fork

    Transmission & Drive Train RSX
    Will a type s release fork fit on a base model ?
  14. CAN: DC5 Type R OEM flywheel and clutch kit

    Engine & Transmission RSX
    Came out of the car at 91800km. Looks like it's the 2nd clutch of the car, as the friction surface still looks good. Flywheel needs resurfacing, obviously. It's 10.25lbs, so very light compared to the 18 or whatever the Type-S has. 350 OBO. https://imgur.com/a/9UMw8D4
  15. AC clutch not engaging

    Problems & Solutions RSX
    What’s up guys? This project RSX is really driving me nuts recently. I don’t know much about AC systems anyway, but here is what is going on. The Ac clutch does not kick on. I straight jumpered the connector to the positive post on the battery with the engine running and it still doesn’t come...
  16. new clutch and flywheel

    Transmission & Drive Train RSX
    hey guys, yes i aware this has been asked millions of times and i read some of them but i still wanna make sure im going the right direction. Also im aware i might need to change master salve cylinder as well. so here is my question i am going to change my clutch also while i am at it might as...
  17. Clutch problems again

    Problems & Solutions RSX
    So I was on here before about some clutch issues I was having. After bleeding the system my problems went away completely. Now after almost leaving my uncles shop my maser clutch cylinder went out. So I got a new one, while bleeding the system after install my slave cylinder just about...
  18. Clutch issue. Need some help Diagnosing.

    Problems & Solutions RSX
    I hear a whiring sound whenever i press the clutch down in neutral. I also smell a bad burning smell. Any idea what is going on?
  19. Flywheel to clutch pins don’t align HELP

    Transmission & Drive Train RSX
    I have a Competition Clutch OE replacement from kseriesparts I bought a lightweight action forged flywheel, both of these day they fits type s blah blah but my flywheel pins don’t align with the pressure plate off by a few mm if one is align the Next hole is off then the next is even farther...
  20. Clutch Replacement Cost

    Problems & Solutions RSX
    The clutch on my base model 02 RSX with 150k miles needs to be replaced. I barely have enough power out of the low gears to even drive the car now. I was quoted $1200 for clutch kit and labor (3/4 or more being the labor) + possible additional 300 if the flywheel cannot be resurfaced. This is...
Top