For sale is my 23mm Eibach rear sway bar that was professionally powder coated bright red by Paul at Columbus Powder Coat.
The Eibach specific bushings are included in the sale.
This bar was purchased new in 2015 and I have only 2,000 miles on this bar total!
I removed it from...
For sale is my set of DC5 Type R aluminum front lower arms that I polished and then had Paul at Columbus Powder coat professionally powder coat clear. The powder coat will protect the polished finish and provides a nice glossy finish.
I installed HardRace harden rubber bushings (part...
For sale are my DC5 Type R front knuckles.
I pressed out the hubs, shot wheel bearings, and worn ball joints.
These items were sand blasted and then professionally powder coated by Paul at Columbus Powder Coat.
I am selling my RSX and no longer have use for these items.
I am listing...
For sale are my RSX type S rear knuckles that I removed the old worn bushings, stripped oxidation and then sent out to be professionally powder coated gloss black.
The rear brake dust shields were also powder coated at the same time and will be included in the sale
These items have...
El Nino has blessed southern california with rain, and cursed my ep3 with an absolute shit ton of mud underneath the car, and in the engine bay. EVERYTHING, yes, EVERYTHING has mud on it. How the hell can i clean the underside of the car, and every inch of the engine/tranny/everything without...
I have a set of Rpf1's that I purchased brand new for $1000 in the spring. I had them powder coated purple at Powder Keg located in MN. Their work is in the Midwest FS section for those who wants to powder coat their wheels. It has a 2 stage with gloss which I paid $580 for. Tires were also...
I was contacted by a great old client, he told me he purchased a NSX from California and it would be here in Jersey soon. Sweet!! A NSX, there are some cars I get excited to detail, this was one of them! On top of that it was Berlina Black with New Pure Red interior, one of only 13 in the color...
Tires: 215/35ZR18 Hankook ventus v4es brand new
Cali trade only
Contact for quick response
Up for trade or sale, make offers. Traded my mac rollaway for them and bought tires, haven't drove my car. It was purchase from a s2000 owner. Will...
17x10 et22 all around
5x114.3 only, not universal
215/45/17 Nankang 80%
215/45/17 Accelera 30% flipped camber wear
Wheels were coated June 3.
Please no trades.
I would give the wheels an average rate of 8.9/10.
Tl wheels 17x8 +48 with very good set of federals 215/40 front 215/45 rear
Powder coated white
Looking to trade for some 17x9 +22 rpf1's plush cash on my end of course
These will need at least +3 mm spacers to clear the rear trailing arm
As the title says, Selling a RBC Mani, Cut, Shaved and powder coated. Installed for 1 month since powder coating. The karcepts adapter is powder coated also. 350.00 for both, Powder coating was 150.00 alone.
S O L D
This color Is not wrinkle black it has less wrinkle kinda like a plasti dip texture
Never mounted since it got coated
3 small spots where the powder chiped of but with coil cover u can't see it
Call or text if u need better pics 267 306 7998
So I am considering getting the injen cai for my 03 type s and was wondering which finish to go with; the polished one http://www.injen.com/galleries/products/SP1477_floating.jpg
OR the black powder coat http://www.injen.com/galleries/products/61320131032SP1477BLK.JPG
Does this even matter...
Hey guys I am selling my Work VSXX 19' rims. I just had them re-powder coated, and just spent a grand on tires for them. Before I had a chance to put them on my car, I totaled it. The rims are 19x8.0 in the front and 19x8.5 on the back. I just had brand new Yokohama Advid ENVigors (225/45r-19)...
As the title states...ceramic coated RSX PLM race header. Looking for $350 + shipping + Paypal. I searched the web and it looks like these list for $500 new these days and $600 for nitride coating. The ceramic coat cost me around $100 to have done professionally. So I'd say this is a pretty good...