Acura RSX, ILX and Honda EP3 Forum banner

Discussions Showcase Albums Media Media Comments Tags Marketplace

1-19 of 100 Results
  1. Problems & Solutions RSX
    Are the stock battery tie downs conductive? My tiedown's coating was peeling and the metal was rusting, so I removed the coating and sanded the metal. Just as I was finishing up I realized the coating felt like electrical tape and was wondering if the tiedown is safe without it?
  2. North East
    I'm looking for quality powder coating at a reasonable price does anyone know anywhere in the Long Island area prefferably but anywhere in newyork I'm interested
  3. Bolt-On Basics: RSX Type-S
    I see a lot of IM that have been sprayed with some sort of thermal coating to reduce the heat soak. Does anyone know where I can buy a can or even what kind is being used?
  4. Southern Cali
    Any one in Bakersfield get down? I need to do my wheels. Please hmu on my email. [email protected]
  5. Southern Cali
    Anybody know a good place to get my rims powder coated? Fast turn around time and not so expensive . prefer los Angeles area ..or somewhere near it willing to drive though..
  6. Wheels & Tires
    Not sure if this is the right sub forum to post this in, but mods move if need to be. I searched Google for the answer, but everything was very vague. Question is I have a set of Gram Lights 57D wheels that I want to get powder coated, but I read that some wheels cannot be powder coated...
  7. General RSX Discussion
    Anyone know a good place to powdercoat my wheels down in san diego? Thanks!
  8. Southern Cali
    Anyone know a place where I can get an IC black anodized. As well as a place for thermal coating?
  9. Wheels & Tires RSX
    Sup CRSX I really need help and some opinions on this one. I purchased some XXR 962 17x9 +35. The wheels are completely flat black and also the 3 inch lip that it has is also flat black. I wanted to buy the gold ones or gunmetal but apparently this size and offset and colors are on a NATIONAL...
  10. Wheels & Tires
    Looking to find out what people think is best plasti dip or powder coating for rims opinions please and thankyou :)
  11. Florida
    just wondering if anyone knows of a quality powder coater in the orlando area? thanks :thumbsup:
  12. Wheels & Tires
    Hey folks. I picked up an older type s, and ive noticed the rubber/silicone coating inside the wheel well is peeling. Not the actual fender liner, but rather the coating on the underside of the car body. How would I go about repairing that? Would a spray on rubber sealant work?
  13. Northern Cali
    If you guys need someone who does a great job for powder coating, or oem painting. Contact this guy. https://www.facebook.com/TheTunersPaintShop Great price. Can powder coat wheels, valve cover, control arms etc.... Paint aftermarket or oem parts.
  14. Wheels & Tires RSX
    I replaced these with 17x9's for a square set up on my s2000 and will be looking to sell or trade these. It is for only 2 wheels and are finished in Special Brilliant Coating. Super clean and virtually no imperfections, I would rate these 9/10. They are only a little dirty. Tires are also still...
  15. Wheels & Tires
    I drive a 2003 white type s with type r badging and lips ect I usually have a set of red rotas on it. But for the winter I always swap lips and wheels. Just how I do it. I am wondering what it would look like if I Powder coated My stock type s wheels lime green. Find pics of white ones...
  16. Southern Cali
    I started powder coating at home I did parts for my rsx and my civic my oven is the size of a house oven so I'm limited in the items I can powder coat I can do a max of 18" wheel. I charge 50 for valve covers and 160-200 for wheels depending on the size I'm currently building my color stock but...
  17. Bolt-On Basics: RSX Type-S
    Hey guys - I've got an RBC that i'm waiting for Kpro before i install, so I thought i'd mess with it a little bit. I've seen some polished ones that are very nice, but I think I'd be cool to polish it and then powder coat it. Or, maybe just straight up Powder Coat it. Here's a pic of my...
  18. Forced Induction & Nitrous RSX
    Up for sale is a brand new/never used Precision Billet 6765 turbo (0.82 A/R) (precsion part #-PTB 655-6765/Model #-6765HP) It features a Ported H cover. T3-4bolt Inlet and T3-4bolt Discharge. The hotside has been coated by Jet-Hot using thier E-Series coating(rated to 2450 degrees F) The pics...
  19. Interior Mods RSX
    Im in the process of assemble my whole motor but before i slap everything together i would like to powder coat, the block, oil pan, head n t3 to t4 adapter (I made out of mild steel). If my head is assemble with just the springs n valves; my block is full assembled as well piston, rods...
1-19 of 100 Results
Top