coilover

Hey CRSX, I recently got a 06 base rsx and wanted to lower it about 1.5 inches. Any recommendations on the types of springs/coil overs that will do the job? Appreciate it!

Hello All, So I just purchased a 02 RSX Type S and I'm just wondering what coils and other suspension mods everyone is running and your honest opinions of them and any other suggestions/reviews, so i can make the best decision for my needs.

anyone know were i can buy just one coilover? just blew my shock cartridge :(

Hey guys, I've been researching the past couple of days trying to find the smoothest coiler system I could get for my DD. Any suggestions help!

So I’m looking on a San Diego DC5 club page and someone is selling a set of coilovers (buddy club) with adjustable dampening. He says the rears are fine but the fronts are stiff, and he said it could be due to him maxing the ride hide down to its lowest point. So my question is, could it be that...

I have a set of tein coilovers that will fit 02-04 RSX or Type S. I had it on a Type S. Ive been trying to get rid of them and just can't since i believe no one in my area really is interested or doesnt have an RSX. The added bonus is i have two front struts and springs off a 2002 civic dx...

For everyone using BC BR coilovers, what dampening settings are you using for daily driving?

Ground control coilover sleeves and vairous spring rates. Springs $90/pair shipped Coilover sleeves (all four) $100 shipped Eibach ERS Springs: (2) 600.250.800 6 in tall / 800 lb/in (2) 600.250.900 6 in tall / 900 lb/in (2) 700.250.500 7 in tall / 500 lb/in (2) 800.250.550 8 in tall /...

I've looked all over and everyone seems to just say get GC's and Koni yellow combo, but i dont even know the ride height on that. I live in Alberta Canada and the roads in the winter become literal hell, and I daily drive this car. I'd like to raise it to stock or at most -0.5" in the winter...

I bought a rsx that has the Mugen coilovers (shocks and springs) rides like its on bricks! No suspension travel and very stiff, on a smooth road its ok, but hit a slight bump and its jarring like 4" pothole would be on any other car. I hate it! I would love to get a coilover that is smooth, and...

I am changing the coilovers on my 02 type s, and I am having trouble getting the tie rod end to completely press down into the seat on the front coilover anyone have any suggestions or experience with this?

So I got the stance pro comp coilovers for my 06 type s and I've seen a decent amount of posts on how to adjust the back cause the way you have to do it is retarded so i figured I'd post the email they sent me on how to do the front and back. But other than adjusting them being a little...

So I bought a used 06 RSX base about. Month ago and it already had a coilover system installed. It was lowered almost to the ground so I borrowed. Set of spanners to adjust the ride height only to find that at its highest setting the driver side is about an inch lower than the passenger side. Is...

..

i just bought the tein street advance z coilovers from www.carid.com https://www.carid.com/tein/street-advance-z-coilovers.html they only came with two dust covers http://imgur.com/5DOds1G is this normal? where could i buy the other two? i searched and didnt find anything but the pictures...

Ok idk if anybody has ask this or done this but is it possible to cut the threaded part on the bottom of my rear Megan coilover so I can go more low.

Introducing the Godspeed Project Mono-RS coil over line. The Mono-RS series released in 2013, is considered to be the coilover for those who are looking for a high performance suspension system, set to perform exceptionally well in track use and also provide the comfort that a coil over should...

Looking for passenger front coilover to replace my broken one. Pm me with your offer, details and price.

Hi all, so I installed a set of progress coilovers on my 06 base rsx yesterday. While the car is up on jack stands I tried adjusting the ride height to be lower (basically you turn the bottom spring perch down). But when I do this it creates a gap between the top of the spring and the upper...