Acura RSX, ILX and Honda EP3 Forum banner

Discussions Showcase Albums Media Media Comments Tags Marketplace

1-20 of 500 Results
  1. Suspension & Brakes RSX
    Used, roughly 20,000 km/12,500 miles on them. Front dust boots on the fronts are ripped as pictured, easy inexpensive fix but not necessary. Not blown or seized, minimal rust. Comes with height adjusting wrenches and allen key for dampening adjustment (not pictured). Part numbers: Fronts -...
    $550 USD
  2. Problems & Solutions RSX
    I just recently bought a 02 type s & in need of new coilovers , need to get an idea of what’s the best that can take bumps on the road with out it sounding like the end of the world every time I hit a little bump
  3. Suspension, Chassis & Brakes
    So I have a Skunk2 Alpha header and catback and have a 15.9mm EM2 front sway to clear the header. I have hasport motor mounts and I have clearance all the way around and don’t ever hear/feel any contact, but the closest point is relatively close. Maybe a 0.25-0.5 inches of clearance. I’m wanting...
  4. New Member Introduction RSX
    Hey guys my next mod when I get my car back is coilovers I was wondering what are the best coilovers for the type s( I have a 03 type s) and also what are the best bang for ur buck coilovers if I’m not trying to spend around 1k for some coilovers
  5. Suspension, Chassis & Brakes
    Anyone has a set of tein coilovers they are selling? If you can sell a single front driver that would be perfect.
  6. General RSX Discussion
    Ive searched around a little bit on here, but nobody with my exact symptoms. I have a clunking noise in the front right, the only time that i really can make the car do the noise is when i turn left with some speed and give gas at the same time. I have just replaced my strut mounts and have...
  7. Wheels & Tires
    Was looking into the Toyo Proxes R888R 235/40ZR17 and the Nitto NT05 235/40R17's, just bought the Tein Flex Z coilovers. I wanted to install the coil overs so I could throw on my new rims but don't know if they will rub. If anybody could offer some insight on what would fit best I would greatly...
  8. Suspension, Chassis & Brakes
    The shocks on my 05' RSX type S are shot and I need to replacement. I've only got about $500 to spend on them and im trying to figure out the best path to replace them at that price point. Im open to coilovers or anything like that but I dont want to lower my ride. Alot of aftermarket parts seem...
  9. Suspension, Chassis & Brakes
    i've been off the board for awhile since moving on to other vehicles but my rsx still lives. my mugen suspension is dead and crashing over everything. thinking of coilovers but not sure what's good. don't need or want it low but definitely want it comfortable for daily(old man now). i've...
  10. Suspension & Brakes RSX
    Looking for rsx coilovers Leave your number if you have some for sale Located in the 206 but will add $ for shipping if needed
  11. Suspension & Brakes RSX
    I have a set of Buddy Club N + Spec Coilovers for sale with about 5,000 miles on them. They are in great condition and ride very smooth. The spanner wrenches will be included also. Asking $600+ shipping from Alabama. Feel free to message me with any questions you may have. Thanks
  12. Southern California For Sale: Local Pick-Up
    Up for sale is my set of HKS Hipermax RS coilovers. The front passenger shock is blown, needs to be replaced/repaired or you can use just the rears/parts. The rest of the coilovers are in fine working condition, but this is a high mileage set. Includes the front pillow ball camber adjustable...
  13. Want To Buy or Trade RSX
    Looking for buddy club n+ or tein flex z coilovers for rsx. Please pm
  14. Suspension, Chassis & Brakes
    So I bought a set of Godspeed mono SS I live in toronto and we use a lot of salt. I've gone ahead and bought some ISC coilover bags, and went ahead and applied anti seize on all the threads, if I make sure the bags are tight and all the threads have anti seize, i should be good for this...
  15. Suspension, Chassis & Brakes
    Is anyone running the type 2 on their RSX? I'm not able to get to the camber plate bolt because it's halfway covered by the strut tower. :dontknow:
  16. Suspension, Chassis & Brakes
    So im in the market for some coilovers for my 2006 RSX type-s. I first was thinking of buying Ktuned K2's but wasnt sure how great of coilovers ktuned makes and then i saw BC coilovers and did a little bit of reading. Looks like they been in the suspension game for long while compared to...
  17. Suspension, Chassis & Brakes
    I am posting this for all those hardworking people wanna spend their cash on SKUK2 junks!! SKUNK2 has given zero support............
  18. Problems & Solutions RSX
    I would have posted this under a different category but it wouldent let me so here I am. I am completely new to coilovers, have never bought or installed them on any of my vehicles so Iv been doing a lot of research on different brands, also trying to do so in a little bit of a budget since I...
  19. Suspension, Chassis & Brakes
    I’ve got a set of raceland ultimo coilovers for a 01-05 Civic what do I need to change to adapt them to my 05 RSX Base. Just tie rod ends?
  20. Problems & Solutions RSX
    :( fail crunched it good I’m gonna have to splice and rewire? Any tips? What gauge wire do I need to use ? ? Sent from my iPhone using Tapatalk
1-20 of 500 Results