Wanting to install skunk2 intake manifold my 06 rsx base. My mods are l/h/tp/e. My dc shortie header is basically broke.I was think of putting stock one back on because everything I've heard on hear says if it's not a race header it just a waste of money. I'm wanting to make the car a little...

I'm thinking about getting into autocross since there is a track near me. Not really to compete, because I don't really have the money or time to be serious about it, but instead to just improve my own personal times and build driving skill. The thing is, my RSX is also my DD. Right now I'm...

eBay: 171043779244 Texts only: 315-436-5237

Got a set of valve springs from a late 2002 model RSX-S, which means it came with the single yellow springs on the intake (part # 14761-PCX-003) and the red dual springs on the exhaust side (part #'s 14752-PRB-A01 and 14762-PRB-A01). I know that years ago IPS made the K2 cams and listed a...

JE Pistons & Brian Crower Rods: 12.5:1 Custom Combination for K24/92mm Crank - $700 Hello we have a set of JE Pistons along with a complete set of Brian Crower Rods that are meant to match the pistons. Both of these items are K24 compatible. These are brand new, never been out of the package...

Just as title states looking for the harness with pigtails that connect to the switch that turns on the parking lights, headlights, and turn signals. It needs to be from a 2003+ EP3 since 2002's are known for heating up :run:. PM or Reply. In need of one ASAP. Shipped to 92345 or 90001. Thanks...

Author: HQH Publication Date: October 2, 2012 Updated Date: N/A Website: http://asianho.net Description of Problem and Solution This is a do it yourself (DIY) guide for replacing the combination (combo) light switch for an Acura RSX. The problem caused by the combo light switch is commonly...

I bought this because i couldnt find my OEM one but found it the day this arrived, sonce i no longer need it i am putting it up for sale. $50 plus shipping this is the original sellers photo but it is in the same condition as shown in the picture

Hey there folks, Last week both my headlights went out. My parking lights and my high beams worked but not my low beams. Both bulbs were good and there were no problems with the wiring. I checked the fuses and relays and no problems. This all took about 5 mins. From there I deduced that...

Hi guys. I know there are threads about short shifters and shift knobs, but I couldn't find anything close to this shifter on the mazdaspeed 3 (and with TWM ss). http://www.twmperformance.com/shortshifters/mazdashortshifters/images/mazdaspeed-3.jpg The height / texture feels pretty good IMHO...

Since the question keeps coming up, I figured it would be good to make a list of what transmissions work with what engines. This is a user generated list so please let me know the engine and transmission combination and if there is anything extra needed to make it work. The engine is across...

JE Pistons & Brian Crower Rods: 12.5:1 Custom Combination for K24/92mm Crank - $700 These are brand new, never been out of the package. this is a custom rod and piston to run a 92mm crank in a K24 block. You can purchase through the store using credit card or PayPal...

I have this set as well as the lugs if needed. Lmk and I can meet you somewhere in Atlanta and in between Biloxi, MS depending on exactly where. I also have my stock exhaust, air box and springs if anyone needs those. wheel 1 wheel 2 wheel 3 wheel 4 There are a few scuffs and a few curb...

got the dealer to print me off a page from the Acura service manual for my 2004 RSX-S regarding the Acura Accessory factory fog light switch i just got done installing, but something caught my eye on the page while i was looking up the wiring diagram.... as we all know, we can't...

Looks for a bit of expert advice regarding wheel and tire selection. I'm looking to pick up a set of wheels and tires for the track season next year. I went to two events this year using my stock wheels and a set of BFGoodrich G-Force sport tires. They held up ok but would roll over in the...

Thinking about getting an aftermarket clutch and flywheel now. Fidanza Lightweight Flywheel Exedy Lightweight Flywheel or ACT Lighweight Flywheel OEM Clutch or Exedy Organic Clutch Those are the only choices that I would consider, any suggestions? This website hardly has anything with...

To what whp and psi levels is this combination reliable? Info from experience preferably...

I am getting either a 2005 NBP or SSM RSX in Febuary. I seem to have a obsession with bronze rims and I know that they look wonderful on NBP paint. The problem is that I am in college so the car will not be garaged, I am thinking NBP would be a bad choice in my circumstances. Do you guys think...

How do you think a buddy club 2 front bumper and a cwest rear would look together? Bad or good?