Acura RSX, ILX and Honda EP3 Forum banner

Discussions Showcase Albums Media Media Comments Tags Marketplace

1-19 of 20 Results
  1. Suspension, Chassis & Brakes
    Hello guys. So, before I place an order for a new set of aftermarket bushings. I would like some clarification. I went outside and took my calipers , measured the swaybar and it gave me a reading of 22.7 now. is the swaybar 23mm or am I to round down to 22mm? Also, being it's an...
  2. Problems & Solutions RSX
    Hi all, I had a P2647 code related to the vtec rocker arm oil control switch stuck on bank 1 and I was just wondering if I purchased the correct part or not on Ebay. The brand is called Green A/C but someone said it is actually a part for the air conditioner switch but I was not sure if they...
  3. Suspension, Chassis & Brakes
    I've been searching around the forum for the past couple days trying to figure out how i'm gonna set my car up and just wanted an extra opinion from someone who knows more about working with wheels/suspension/tires than i do. The wheels going on the car 18x8.5 +25 all around. I also plan on...
  4. General RSX Discussion
    Hi, I had 1 lug nut per wheel stolen over the weekend. can somebody confirm the size of the lugs for me so i can buy replacements? think it's 12mm 1.5inch, but not sure... dunno if it'll matter, but my wheel size is: enkei 18x7.5 thanks in advance
  5. Suspension, Chassis & Brakes
    Okay, im sure you heard this story before. Every time I turn or go over uneven surfaces, there would be a clunking sound on the front passenger side of my suspension. Turns out I have a dry rotted bushing. I can turn the wheel and watch my strut move like in this video...
  6. Suspension & Brakes EP3
    Application - 2002 Honda Civic Si EP3 50mm Housing Q: I have cut approximately 36-37 mm from the top of the strut housing. Based on the measurement of the Koni insert, and the measurement of new housing length, there will be about approximate 1.5 inches of the strut insert extending from the...
  7. Bolt-On Basics: RSX Type-S
    Whats up guys. I found an ad on craigslist for this injen SRI. the guy had it on a 2006 base rsx but he says that it was originally on a type s. I have an 05 type s. Can anyone with the injen sri confirm that this fits the type s model? He does not have the part number for the intake which is...
  8. Wheels & Tires
    I have been doing all the research and planning in order to put together a wheel and tire package. Based on what i have seen from the various tire and wheel threads this combination will work, but i was looking to get some confirmation as most people seem to stop at 225's or 235's..... Planned...
  9. Texas
    Who's in? Let's meet at Eisenhower Park at 2:30. That way we get a feel for traffic conditions during the same time we expect to be cruising for real. We can meet up and car pool. Bring cameras if you have them, so we can snap markers for the route, etc. Is the time good for everybody? 1...
  10. Suspension, Chassis & Brakes
    Hey folks, looking for a bit of confirmation on my understanding of suspension and my projected setup and plans. So I have an 06 base auto, sad I know, but it is what I have and I don't think it will be changing anytime soon. I'm looking to autocross maybe once a month, along with weekend runs...
  11. ECU Tuning RSX
    Hi All, I've done some searching and I've come to the following conclusion: 1) I purchase a used ECU from a CRSX member which is already reflashed with map #4 2) I take my car and reflashed ECU to the dealer 3) I install the reflashed ECU at the dealer 4) The dealer then matches my OEM...
  12. Suspension, Chassis & Brakes
    Mods please delete.
  13. Transmission & Drive Train RSX
    Basically I need to know if the type S clutch can be used in a base? If yes was there any issues?
  14. Problems & Solutions RSX
    Well, as stated from a previous thread, I locked myself out of the car, and left the keys inside. Since I just gotten the car, I havent made a spare key as yet. So I called AAA to get my car unlocked. They tried opening the car with the slim jim procedure, and they somehow struggled for a while...
  15. Suspension, Chassis & Brakes
    I've searched around and seen that the 05+ aspec suspension will fit on a 02-04. Now I'm assuming that it works opposite as well, 02-04 a-spec suspension fits on a 05+. If someone knows for sure if this is true, let me know :) Thanks.
  16. Suspension, Chassis & Brakes
    ok guys i've pm'd, searched and google'd. everyone is 50/50 on big brake kits fitting on stock rims and then later in the post they don't. can anyone confirm which ones do fit on stock rims? meaning do YOU have a bbk and they fit? thanks
  17. Transmission & Drive Train RSX
    Ok so heres what I have so far (From left to right) Center Console Side Panels, Immobilizer, clutch, brake and gas pedals, short shifter assembly, ECU, Transmission Mount, Brake Master Cylinder, Clutch Master and Slve Cylinders, and in then back, the shifter wires and transmission(not pictures)...
  18. Turbo RSX
    I got off the phone with CLEVE about 30 min. ago and he told me you could get a Stage 1 w/guardian for 3800 but the guardian that you woluld receive would still be considered the beta testing guardian and that when they are totally done with all the bugs ect. that the price of the kit was going...
  19. ECU Tuning RSX
    I sent my ECU in from Victoria, BC, Canada on monday morning to get K-Pro'd, and it was confirmed delivered to Hondata at 8:53 tuesday morning. Now they say they've got a two day turnaround time, so I'd think it should be on it's way back by now. My question to Hondata customers is, does Hondata...
1-19 of 20 Results
Top