Acura RSX, ILX and Honda EP3 Forum banner
connection
1-14 of 76 Results
  1. Problems & Solutions RSX
    Hey guys. So i just got a k-tuned fan switch and installed it , but I find the stock connector , does not have that audible "click" onto the ktuned switch?? it's just sits on there, but loose has anyone come across this? how do you remedy this? :fistbump:
  2. Lighting RSX
    The plug for my drivers side headlight is loose. I was stumped as to how to fix it after swapping the bulb and checking the fuses and finally figured out if I moved the plug to just the right position the headlight would come on. What part should I replace to fix this? Do I just need a new...
  3. Car Audio & Security EP3
    I have a Clifford 330.3x alarm installed with proximity , shock and tilt (all dei sensors) I wired the shock sensor to the proximity sensor, I cut the wires and put together this way: black to black red to red left the proximity green cable connected alone since the shock one is jumped to blue...
  4. Problems & Solutions RSX
    Hello everyone I just bought this 04 type s changed the passenger side door since it was dented off idk what year or model rsx door fits on perfect only problem is the main connection is bigger on this door than the connection on the car so is there an adapter or something helpp
  5. Bolt-On Basics: RSX Type-S
    I am purchasing an SSR header which I was told has 2.5 inch piping. I am looking to throw on an Invidia Q300 (2.75in) exhaust to mate up with it but my problem is if the SSR will bolt up to the Invidia? Remember the SSR uses a test pipe, and I know I could just have a new test pipe fabricated...
  6. Car Audio & Electronics RSX
    25 shipped for both.
  7. Southern California For Sale: Local Pick-Up
    Mod Plz Close
  8. Problems & Solutions RSX
    Hi all, hoping for some guidance before I start taking my Intake Manifold to pieces. For the past 3 months my 03 RSX AT 117k has been having trouble cranking over when left overnight on occasion. Sometimes it was fine, sometimes it wasn't, normally it struggled when it had been cold. I has...
  9. General Discussion EP3
    Hello all. I have an 04 ep3. I recently changed the door lock actuator for the driver side. When putting the door back together I am not connecting the door lock cable correctly and it keeps coming off of the latch once the door is reassembled. Does any one have a pic or diagram off how the...
  10. Problems & Solutions RSX
    So after i removed my a pillar to put in my gauge pod the previous owner broke the bottom tab that snaps it into place and I broke the top one trying to put it back in:mad: whats the best fix for this??? i would assume buying new tabs but where do i get them? sorry if this has been answered...
  11. Lighting RSX
    My never ending attempt to fix everything that the previous owner messed up continues..... The cable is too short, it looks like it was cut then reattached poorly so there's copper sticking out. Should I replace the part to redo the positive/ground wiring so it's not sticking out like that and...
  12. Car Audio & Electronics RSX
    $450 FIRM! Like new condition! Discontinued. Ready to be installed in an RSX! Located in San Diego 92154. No low ballers, please. Will ship at buyer's expense. Pictures, specs and info here: http://www.sonicelectronix.com/item_17137_Eclipse+AVN62D+-+AVN6620.html :wavey:
  13. Car Audio, Security, & Electronics RSX
    I'm in the process of installing a pioneer avic 110bt and I'm not quit sure where to splice the pink wire to (the one that is supposed to connect to the car's speed signal input). I've read that it connects splices to the wire that comes from A pin 18 and that its a white/green wire ( type s)...
  14. Texas
    Hey all, Jusy wanted to let anyone looking for a car or swaps know that I can get you some of the best deals.. I recently got my delears license and I can go to any auction in the US. I have been going to the insurance auctions here and there and sometimes they have RSX's that go dirt cheap...
1-14 of 76 Results
Top