Search Results for ‘connector’

Hey everyone, I was doing some wiring and I found an orange plug with a blue-yellow wire under my fusebox in the engine bay. By all the grease and dirt I assume it has been there for a while. It was held there with blue tape that cracked almost as soon as I touched it. I couldn't see where it...

I'm troubleshooting the p1166 code (air fuel/primary O2 sensor). The shop manual shows test leads at the ECM/PCM such as the image attached. My question is are the readings done with the connector still attached to the ECU (from the wire side of the connector)? It seems this may be the case...

So unfortunately over the weekend my wireharness somehow got caught in my serpentine belt and ripped the connector to my crank shaft sensor. I’m being told by Honda there is no replacement plug and a entire harness kit has to be replaced... I can’t be the only one who has ever had this issue, or...

Hi I have a racing header on my RSX and was driving in the city and my O2 Downstream sensor ripped off bought a new 02 sensor and extension. I went to plug it in today but realize that the other end of my sensor and extension is a female. And the part from my rsx where i need to connect is also...

Hey everyone, so my heat hasn't been working for the past few days and I know the problem. The plastic piece connecting my metal rod to the blend door actuator broke and so there's nothing connected to the door to move it from hot to cold. I'm trying to look for just the plastic connector piece...

Hey group so my son's 2004 type S has a cracked mirror housing. It's Arctic Blue Pearl, and only the 02-04 type S models had that color. However, he has a 2004, which means he has heated mirrors. I found non-heated mirrors in the correct color, so my question: will the connector from a...

I ordered a new Denso Direct-Fit O2 sensor to fix my p1166-67 codes, so I was expecting a primary. After the impulse buy at a $50 discount(Still overpayed looking back) and screwing in the new sensor, I notice the connectors are the same! Looking back I see this was a huge NOOB mistake! Can I...

Greetings! I need some help identifying this electrical part so I can repair it. Thanks!

I have a 2005 Acura RSX (base) I'm in desperate need of the small connector that plugs into the IMT valve position sensor, 3 wires. Its need to be cut from the engine harness with enough wire to allow me to soder the wires back together on mine. Here's what it looks like and wheres it located...

My AEM cold air intake broke at the handle (entirely, now there is a hole where the handle use to be), so I plan to replace it with the stock 2003 rsx type-s air intake for now. My problem is that the intake air temperature (IAT) sensor connector for the stock box is missing. So my questions...

Got a somewhat unique situation here.. A couple months ago I had a code for some erratic fuel trims I don't remember what code but I had found the weather seal on the connector for my air fuel ratio sensor was missing. As a temporary fix I eliminated the connector, twisted the wires together and...

long shot but here goes nothing XD im looking for an 05 vss connector that goes into the vss on the trans text me at 714-887-7930

Where can i find the headlight connector for the daytime lights? Its the socket where the bulb goes in. I cant find it anywhere online! Please help

I bought an o2 sensor and the connector is wrong. My connector is exact opposite of what was given to me. I looked them up online and I am confused with whats going on. I am wondering if the o2 sensors somehow got mixed up as they looked to have been replaced. This is what my plug looks like...

Selling a 3 Black Heated seat Button Assembly with the trim surround. Note: I do have the Connector Harness that plugs into the seat heater switch For Two of the switches 3 very small markings from removal that are pointed out in the picture below. I give it a 9/10 or maybe 8/10 (if...

I've searched and cannot find anything. It's a strange blue wire connector to the right of the head of the engine. Edit: 2003 base manual

My car overheated and after popping the hood i found lust everywhere from a leaky hose that was spraying water all over the engine. Anyhow, when i tried to take out the hose and replace, instead of the hose coming out, the whole metal thing came out with it. Pics attached. Are those things...

I need the pinout for the plug that plugged in the ecu it's attach to the dash harness

It's connector d that is attach to dash harness

Hi. According to this write up (http://www.ephatch.com/forum/showthread.php?44017-Sensor-Location-and-part-s-for-K20-24) i'm looking for a '04-07 Accord, '03-05 civic, '03-07 CRV, '03-07 Element, '04-07 TSX & '02-06 RSX non Type S knock Sensor connector, part number 30530-PPL-A01. As i'm not...