Search Results for ‘correct’

Hi Anyone know the correct dimensions/templates where to install the rear JDM Type R/Type S emblem? I know there was a thread made about it a very long time ago but I can’t find it. Thanks

This information is intended for an installation using a Compustar CM7200 Remote Start module (With Blade-AL security bypass), with the Alarm Kit (DAS) add-on. This information should be identical or very close for other modern Compustar modules. You can reference the materials that have come...

Anyone know the correct belt size for a k24a2 with the AC compressor removed and EP3 electric power steering installed? Trying to save myself from having to measure it.

So...its a lilttle weird considering I bought my car brand new from the dealership and never had any work done. I just noticed that my cylinder head cover is missing a bolt on the top left corner which is why I'm assuming it's leaking oil from the back. I need help identifying what bolt and and...

Just to give a heads up to other CRSX members... I bought fog lights from ebay member: meleneko Link to the fogs The wiring harness was 99% correct. No need to hack, cross wires, or sit there frustrated like you will with most wiring harnesses for these ebay fogs. The only 1% missing for...

What should be the correct a/f readings for a Na 06 type s? Just have I/rh/e. It's reading 11.5-13 wot, 13-14 part throttle, 14-15 idle. I'm just wondering the correct a/f readings for a Na. I'm still new to kpro

I know the rsx lug nuts will not hold the Evo9 Enkei rims properly after some research. So, I'm going to buy these Evo9 rims from someone who doesn't have the oem lugnuts for them. Will these Muteki red lug nuts be proper fitment for them...

Hi guys new here! I have a JDM k20 dc5, and have bought a AEM power steering pulley only, no other pulleys. Does anyone know the correct belt to use? Thanks in advance :)

Can I put a 02-04 RSX S tranny in 05-06? Will the car run correctly, as it doesnt matter if the speedo is off, Im racing dirt track and trying to get the best ratios for different sized tracks with one transmission.

ive been researching coilover now and use to want the tein basic but heard alot of bad things about them being kinda rough for dd...now i am currently thinking of the tanabe's heard alot fo good things and leaning toward these the problem is i dont know the exact name.........i believe Tanabe...

Looking into getting a harness to mount to my new NRG harness bar. Looking around its pretty confusing what harness to get. Im looking to get a crow harness because they seem reasonably priced and look great. My questions are 1) what length is best for the shoulder straps? Crow has a 51" and...

Is there an easy way to find out where im possibly bleeding boost off. I have a 05 rsx type s JRSC with 3 inch pulley. Aem v2 intake hondata img. Megan race header and kteller 3 inch exhaust. Im peaking at 7.5 psi at 8500. Should i be reading this low or bleeding off. Any tricks to find it

ok guys i need a little advice, its been a long time since i have been all motor but a friend has an 05-06 type s, hes not 100% technically savy as I or most of my friends and he purchased some parts for the car, he has a buddyclub raceheader and matching 2.5" pro-spec exhaust, skunk2 intake...

Will these work for 02 high beams? http://www.ebay.com/itm/NOK7617-NOKYA-HYPER-YELLOW-H1-55W-2500K-Head-Light-Bulb-5736-/400295377709?pt=Motors_Car_Truck_Parts_Accessories&fits=Model%3ARSX&hash=item5d3376bb2d&vxp=mtr

Hey guys, I just want to verify that I'm thinking about this correctly: I have 17x8 Enkei RPO3 with 225/45/17 Star Specs. I'm lowered on Progress Coils. During Autox, I get a little rubbing on the inside. Using this calculator, I believe it's telling me to use a 25mm spacer to move the wheel...

Moved to DC5parts.com

My ep3 has an injen cai and i was driving through a thunderstorm. Not sure if i sucked in any water but when i was stopped at a red light the engine stalled. It started back up just fine but it seemed really slow and would only go up to 3k rpm. After a bit of driving the cel came on but it was...

Like title says $300 plus shipping