Acura RSX, ILX and Honda EP3 Forum banner

Discussions Showcase Albums Media Media Comments Tags Marketplace

1-5 of 5 Results
  1. Transmission & Drive Train RSX
    Resurfaced flywheels FTL with stage3-4 clutchs. You do know that Exedy/Daiken manufactur ALMOST all the clutchs other than twin discs(and some of them) that are used in the Kseries trans. The stage 3-4 clutchs from ACT, Centerforce, Exedy and Clutchmasters, all use the SAME pressure plate...
  2. Suspension, Chassis & Brakes
    Hey guys - I just got a set of roll center correcting ball joints in the mail today from Todd!! I hope to have them installed very soon along with energy suspension bushings. I will update this thread when I have new information. Anybody thinking about ordering a set of these please do not...
  3. Suspension, Chassis & Brakes
    This is a continuation of the following thread: It was getting too long and cluttered. http://forums.clubrsx.com/showthread.php?t=373563 Read it to get more background. The short story is, when you lower a car with a McPherson Strut the roll center is lowered substantially and in some cases...
  4. Suspension, Chassis & Brakes
    as many of you know... when the rsx is given some negative camber in the front with the use of camber plates... beyond -1.5 degrees of camber... it becomes very difficult (impossible) to zero out the toe (it toes in pretty severely). if MORE negative camber is desired (i want to get to atleast...
  5. Exterior Mods RSX
    As many people know JDM lights were designed for right hand drive and as results the beam patten is set up so the cut-off line rises on the left instead of the right like USDM lights. While this is neat it does have the somewhat interesting effect of blinding on coming traffic. Because this is...
1-5 of 5 Results
Top