Acura RSX, ILX and Honda EP3 Forum banner

Discussions Showcase Albums Media Media Comments Tags Marketplace

1-20 of 41 Results
  1. Exterior Mods RSX
    i have an 06 rsx, NHBP, i'm planning to debadge it and replace it with red honda badges, i'm worried that the "acura" and "rsx" logo might leave a ghost/shadow effect when i remove it. don't want to damage my paint or anything. :shakehead
  2. Exterior Mods RSX
    I am looking to take off the rear (A) emblem. I do not want to replace the emblem, instead I am looking to shave the rear completely flat. After searching, I know how to take the badge off and to use pliers or something small to remove the small plastic locating nibs. Now my question is, what...
  3. Exterior Mods RSX
    I wanted to debadge my car and maybe remove the acura lettering. My car is an 03 will it leave any marks or will you be able to tell a difference in the paint color in a car from 03. I wanted to get some advice from someone who's already tried it first.
  4. Member Show-Off RSX
    tell me what you guys think. just bought the car a week or so ago with 40k miles. 05 Type S. i plasti dipped the tail lights and debadged.
  5. Problems & Solutions EP3
    I removed the civic emblem ( hair dryer, fishing line, goo gone ) then a wash and it looks clean but if you look real close you can still see the civic..now its really faint but I notice it. How can I remove this completely?! Sorry for the newb question..
  6. Exterior Mods RSX
    Full De-badge
  7. Canada East
    well i decided not to use the hair dryer because i couldnt locate one, so i used warm water with soap and soaked the emblems and used a floss to try to get it out, it was a success to get out but most of the gunk from the emblems remain on my trunk, i tryed to use soap/water also rubbing alcohol...
  8. The DIY Garage RSX
    Whats up fellas, I am new to this site, due to the fact I just got my first RSX. I am going to take the badges off of my car so that I cat paint them Black. I know how to get the badges off of the back, but was wondering how to take the one that is mounted to the grill. Help would be greatly...
  9. Problems & Solutions RSX
    i just debadged the rear "A" symbol, and i put the honda jdm one on it. however, below the honda badge, the residue of the A is still there, and i've tried everything to get it off, but it wont come off. its not the tape, but like lines that show where the old badge used to be. is there any way...
  10. Car Care RSX
    I've searched already and there's a ton of stuff referring to "how to" debadge but nothing really to this nature. I removed the "acura" and "rsx" badge along with ALL the adhesive that was under it. Unfortunately i noticed that there's a very faint outline of the words left even after the car...
  11. Exterior Mods RSX
    I just bought a 2003 rsx and i want to debadge the rear emblems, spray them a different color and put them back on. How can i do this? Also, i want to remove the front logo and spray it a different color. I dont know how to do this either. I was told by a friend that i could use a hairdryer and...
  12. General RSX Discussion
    I notice a lot of bases with the rear right RSX badge removed, which isn't a problem except for the fact that they also have a fart cannon exhaust and/or a big wing or CF hood. Are they doing this because they are ashamed to have ricey mods that make them look fast when they have the slower...
  13. Car Care RSX
    hey guys well i debadged yesterday and i was using goo gone with the peel off they gave me. and after my car dried up i realized i have some scratches on it. i was wondering if i can Rubbing Compound or get my car detailed to get rid of those scratches .. any suggestions? pics below
  14. General RSX Discussion
    got the 'acura' and 'rsx' and 'type s' emblems off turned out good, used microfiber over screw driver to initially remove emblems, and then used microfiber and rubbing alcohol, and a lot of rubbing, and patience...
  15. Problems & Solutions RSX
    Check it out, i debadged the "Acura" emblem on the back left of my TypeS and it left some Residue behind! I used floss and GOO-GONE Sticker lifter! Any suggestions on how to fix this?????? Any Help Appreciated.
  16. The DIY Garage RSX
    car is pretty dirty though... I used primer, touch up paint and clear coat.
  17. The DIY Garage RSX
    I've been reading quite a few threads on debadging and figured there should be one complete thread since each one I found contributed a little detail. I bet some people will flame me for making this but it seems people are making this VERY simple project into a big hairy deal. If you don't...
  18. Exterior Mods RSX
    I have a NBP and have for 4 years, so if I take off the badges will there by noticeable fading of the paint?
  19. Problems & Solutions RSX
    I am de-badging my car right now and I got the logo off but the adhesive is on there and I cannot get it off!! I am using goo gone - automobile and whatever I do it will not come off. I did get about half of it off... Any ideas!?!? Please help fast!!! =)
  20. Car Care RSX
    ok so i removed my acura and rsx type s badges on the rear....i did as everyone said and got all the glue/gunk off....used the goo gone stuff....but there is still a pretty big shadow from both badges, as well as an outline that i can feel from the badges (theyve been on for 4 years so i figured...
1-20 of 41 Results
Top