difference

Was wondering what the difference between an RSX base model to dc5 RSX is what the difference

So, i'm looking at oemacuraparts and notice there are two part numbers for the front brake pads. Anyone know the difference between acura part number 45022-SVB-A03 and 45022-SVB-A02? I was also thinking on getting brembo brake pads. Does brembo make brake pads that fit the stock 06 type-s...

I currently have 18" rims (came with the car) but really wanted to downsize as I heard the car weighs less and becomes faster. Also heard it can give a smoother ride which is a plus. But will my car be that much faster if I downsize?

Not sure where to put this, but I figured I'd spread the word so other people don't make the same mistake I did. I don't know if it's the same on the Aussie market cars, but the JDM mounting points of the clutch master cylinder are 75mm (measured from center to center) and the USDM mounting...

Placed "type r " in parentheses incase anyone ever searches for a thread like this in the future. Anyways, are itr and aspec side skirts the same? Also, are 02-04 and 05-06 aspec side skirts the same or different? Thank you

Hi All, I took my Honda to my local Honda Garage for a service and they noted the compliance bushes are worn, however i've never heard of the term "compliance" bushes, is this reffering to the anti roll bar bushes and just another term for it? Please advise :) Rob

2004 type s. whats the difference between the front brake caliper guide pins a&b? Part numbers 45235S0A003 and 45262S0A003. Cause the ones on the car look exactly the same

hey guys my DC shorty header actually cracked and ive read online and on crsx that the shortys actually dont do anything, they just look better is all. was just curious if it actually doesn't make a difference? i was thinking of just picking up a stock one from the market place for cheap instead...

So I might need to replace my axles and I have a friend that is selling a single base axle. Would it be a bad idea to put that on with my type s on the other side? Will it fit?

Hey guys, I'm looking into buying an exhaust system for my 2005 Type-S. I don't have a ton of money right now, and I found this exhaust system on ebay for $130...

Noticeable difference between 17"x7" vs 17"x7"? Upgrading from stock. Hey all, I have a Base '06 RSX and I want to upgrade my wheels. I'm planning to get either 17x7 Enkei EV5 or 17x7 Enkei SV6 linked beforehand. Assuming the same offset of +40 due to wheel spacers and tires. Will I notice...

anybody know if the fuel tank sending unit are interchangeable between these years?

I need to order a header to replace my leaky stock one on my daily. Its a type S. My local shop has an OBX race header im stock for cheap but it says for a base model. How would that affect hooking it up to a q300 or my factory exhaust. What is the actual difference? The test pipe? ive been...

The past owner said he put Premium gas in it when it says it's a Unleaded gas car. Do I continue putting Premium gas or am I just wasting money? 2002 Acura RSX 5 Speed

Fallow on formypartsales! Ep3typer-usa (facebook) Ep3typerusa (instagram) Ep3typerusa (ebay) Also join Clupep3 facebook Ephatch facebook

I bought a friend's Base RSX with a DC Sports Race Header and HKS Hi-Power cat back exhaust. I am trying to put a stock header and cat on it so it will pass emissions, but it is not lining up with the HKS - so I am trying to figure out if he actually put a full type S system on, or if I was sold...

Hello! I am going to replace my clutch slave cylinder and part of the directions mention apply brake assembly lube and another part mention applying High temperature grease. What is the difference between Brake assembly lube and high temperature grease? I ask a worker at advanceAutoParts and...

Does anyone know what the difference is between the PRB HF-1 and PRB HF-2. Itseems like the HF1 comes on the 02-04 type S and the HF2 is on the 05-06 type S. I've searched and can't find an answer. My HF-2 cracked and I'm trying to replace it but most of the ones for sale are HF-1.

So my next mod to my RSX is going to be a race header. I've decided to go for a 4-2-1 PLM. My first choice was this 2 piece design. http://www.kseriesparts.com/cr/PLM-HK20-HEADER.html It goes for $400 and it looks pretty straight forward. The only thing I dont like is that its a 2 piece...

Looking to buy a k24 and came across these two but not sure what the differences are. Could someone help me out? First one > http://www.hmotorsonline.com/shop/sc2000search.cgi?what=page&item=30033 And second one > http://www.hmotorsonline.com/shop/sc2000search.cgi?what=page&item=30034 Any...