Search Results for ‘difficulty’

How hard is it to drop the transmission on a 2005 RSX-S? Compared to an Integra or Civic (takes me about 4 hours)? I think the pressure plate is bad or a spring popped loose. Went to SF last night and barely got home. Feels like the clutch only goes in halfway. Got a quote for $900, so that's...

Hey all, This is one of my first posts but I've been struggling with this issue for about a month now and am curious if anyone can provide insight. Roughly 6 months ago I installed Function & Form T1 coils on my 06 type-s and it's been less than pleasant since then driving on these Alabama...

I recently replaced my oem clutch on my RSX with an Exedy Stage 2. We put everything back together and took it for a drive and I have difficulty going into 3rd and 5th gear. In order to get the gears to go in, you have to push really hard and hold the clutch all the way in (if I try to push it...

My 2003 base 5 speed is having some serious difficulty starting, particularly when it's a a cold start. It will take 5-10 attempts to get it going. It cranks but will not fire. No clicking sound. When it finally fires, it seems to just barely do so. Once it's running, it runs fine like usual. No...

So i mis-shifted and blew the engine in my type s. (reved to like 11k or something stupid) I'm in the process of looking for a new K20a2, but should i be picking up a trans while i'm at it? I'm on a pretty tight budget and i'm not looking to spend any more money then needed i just want to get...

The car drives perfectly normal at lower RPM's/normal driving conditions. When taking my car into higher RPM's it feels as if there's a wall. It will eventually get into gear when the RPM's drop a little. I also noticed when I downshifted today from 5th to 4th at high RPM's I also feel a little...

So about a month ago I started noticing my clutch pedal sticking a little bit when it was cold out in the morning and didn't really think much of it. But lately the pedal has been sticking after every time I push it down and my gears are very difficult to shift into and grind on occasion even...

Replacing my clutch and flywheel tomorrow, my 3rd gear synchro has the usual problem with it grinding or just being difficult to engage once in a while... I was thinking that if it's not too difficult to swap just the synchro to a 05 carbon one, id take care of that while the trans is out...

I have a 2006 Rsx type S and i stripped the screw that raises the low and high beam. What should I do?:deadhorse:deadhorse:deadhorse:deadhorse:deadhorse:deadhorse

I've never installed lips before and I was curious if someone could give me a run down of how that stuff works and if its easy to do if never done before

used puller to get it off! hey guys so i was doing a rear wiper delete, i used this DIY:http://forums.clubrsx.com/showthread.php?t=669201. anyways i got to the part where you take off the bolt on the top of the wiper. afterwards, my wiper doesnt come off :thumbsdow ive spent hours trying to...

I recently took out my rusted DCRH and installed an OBX SS race header. After that I noticed that it was harder for me to shift OUT of 1-3-5 gear. Shifting into 1-3-5 is no problem but when I try to shift out of those gears during normal driving it's harder than before the install. I did...

How hard is it to install OEM fogs, is there any cutting required? Is it possible to modify the wiring setup to just use the OEM switch as a simple on/off switch rather than being connected to the headlight setup? Also, I was looking into some fogs on eBay, does anyone have experience with...

I have my control arms out and i am looking for a place to press my new hardrace bushings in, but its kinda hard. One guy told me at least 2 hours at $90 an hour... I wasnt expecting it to be that much. does anyone know of anywhere in Miami that does it easily? or how much do most pay to have...

details: stock tranny. 140k miles. problem: difficult to shift into all gears while moving. while stationary, i can shift into all gears without a problem. when releasing the clutch, at the top, the car shutters a bit. i can start moving by slowly release the clutch without any shuttering...

Ok guys, I had an accident and it caused some front end damage nothing damage past the radiator. However, Now when I shift to fifth gear it is more difficult than normal to go in. No grinds and its only in fifth gear. It will go into fifth it just takes more effort than normal. Any ideas...

Really interested in getting the Hondata Intake Manifold Gasket but am a little concerned about the difficulty of installation. Anyone install this themselves? Can you tell me approximately how long it took you and if there is anything too difficult about the install. Anything is appreciated!

so i'm thinking about getting a race header. i'm definitely not going to do the esmm's myself and am going to pay a shop to do them. i'm just wondering how difficult the race header install is going to be. i've done alot of reading and searching and i know that it's not impossible, but it's...

Perhaps this should belong in another thread but the quality of replies is generally best in All Motor. With that being said I was wondering how difficult it would be to self-install some IPS-K2s. I have minor to average experience I would say. I installed all of the mods on my car (in sig)...