Acura RSX, ILX and Honda EP3 Forum banner

Discussions Showcase Albums Media Media Comments Tags Marketplace

1-17 of 19 Results
  1. Problems & Solutions RSX
    I have a Carbon Creations hood I bought a while back, but the nozzles that came on it are not only obnoxiously large, but one is way off center. Since I no longer have my original hood to reference and I'm finally getting tired of the weird look and poor water atomization, I tried searching and...
  2. Exterior Mods RSX
    so when I get a type r wing i need to drill holes in my trunk, exposing bare metal so how do you seal it to prevent corrosion so even if water reaches it past rubber grommets it will be protected from rusting??
  3. Exterior Mods RSX
    Hey everyone, I have a cf hatch on my ride and I'm wondering if anyone has drilled into the hatch in order to install a rear emblem. Also, any advice on installing a Mugen wing on a cf hatch. Thanks!!
  4. General RSX Discussion
    Im kinda new to modding and my rsx did not come with a spoiler, therefore has no holes on the decklid. I looked up the DIY but it does not show the drilling part. How hard is it do by myself? Anyone have any links to a DIY of it? Thanks
  5. Problems & Solutions RSX
    What size drill bit do i need to drill out the screws on the rotors that I am replacing?
  6. Interior Mods EP3
    Hi everyone, I read that for our cars we need to screw the Mugen gas pedal right onto our stock pedal. I figure our pedals can't be taken off because of the drive-by-wire sensors that are built into the pedal itself. I guess my question is, is it safe to drill into the pedal? Are there certain...
  7. The DIY Garage RSX
    so should i just go for it? spots are premarked so should i just go at it with a drill or is there anything i should know first?
  8. General RSX Discussion
    Looking to put a hitch on my car to tow a Sea Doo I plan on buying but am having a hard time finding the hitch I want. Im looking for a no drilling setup for the 05 model and not having any luck. All the ones ive found require drilling. I have seen a couple that dont require drilling but their...
  9. The DIY Garage RSX
    Sup guys, so my 2002 rotor screws are &*%*, I didn't use an impact screw driver but I had massive torque and leverage, the problem was the REALLY weak metal of the screws, I have like 3 different sizes of philips but no dice..... anyways not totally stripped but there is no way to turn these the...
  10. The DIY Garage RSX
    Ive search and couldn't find anything about to what extent you have to drill the comptech short shifter. I just want to know what kind of drill bit I would need and if anyone has a pictures? All the other threads on this are pretty old and the pictures don't exsist anymore. So any help would be...
  11. Suspension, Chassis & Brakes
    well i have this popping/clicking noise in my Megan coilovers and i've tried to put grease on them and that didn't help, the sound is still there and is getting worse. i talked to Steve from Megan Racing and he told me to drill in my coilovers to make the sound go away. He said that they tell...
  12. Exterior Mods RSX
    Don't know what happend to my first post (I can't see it) but just to repost what I was asking: I'd like to keep the functionality of my windshield washer nozzles without drilling holes in my carbon fiber hood (the fiber images hood that I got doesn't have the precut holes), and I had 2...
  13. Exterior Mods RSX
    I got my CF hood but the washer nozzle holes are just a tiny bit too small, anything I should know before drilling the hood? I've heard something about either doing low or high revs with the drill?
  14. Exterior Mods RSX
    ok im not gonna have my front plate on my buddy club 2 kit..but if i ever got a fix it ticket and had to mount it on...would it be safe to drill in the bracket wedge mount things? im just concerned about fuckn up and making a huge crack
  15. Exterior Mods RSX
    i have the VIS carbon fiber hood and I want to put on some hood pins. anybody that has a VIS cf hood with hoodpins or anybody else know if its an easy job? i went to a local shop and they were trying to charge me 40 for the hoodpins and 70 for the installation:firemad: do you guys recommend...
  16. Exterior Mods RSX
    I got a CF hood and the hood do not have holes for washer nozzles and hood pins. how do I drill a hold on the cf hood? can I just use a normal wood drill and make a clear hole? or do I have to use some other method cuz it's carbon fiber? the hood is actually not 100% CF, the frame(?) is fiber...
  17. Nitrous Oxide RSX
    Okay... Im trying to get everything stright... What parts of the car do you need to drill holes in when installing a Nitrous kit. So far I think I know. .. you need to drill holes in the intake and the manifold ... correct ?? I also heard the NOS direct port system , no drilling is...
1-17 of 19 Results
Top