car started fine this morning, hit reverse to pull out from parking spot slowly, fine. WHen i changed to drive i felt a big jolt. drove off fine for about 7miles. started to sputter a bit then it got worse. now it wont go past 10/15mph in drive or reverse. When I hit the gas it just revs up, but...

Looking for a 4.7 FD for K20a2. OEM preferred.

So i have an 04 type s when you turn on the car the idle is rough when you drive it past 2k the car drives fine but when coming too an stop and putting it in nuetrual the car idle drops and car dies took it too an mechanic and he is saying it is because low compression cylinder one. 130...

Hi, i want to double check, as i tried to google it but couldn’t find an appropriate answer. What belt size does Base RSX k20a3 engine take? This was the first time i changed since I bought the car, i ordered it through local store Autobarn here in Melbourne, Australia and they supplied me...

Sold.

I just swapped in a K24A1 with forged internals and I previously had a K20A3 Turbo. I will be getting the car tuned as soon as its running, but I need to be able to drive down there (about 30 miles). Fuel system is the same; same 650 injectors. Same turbo as well. And I have KPro Question: Am...

Read more about the 5 Reasons You Should Drive with a Dash Cam.

For sale Drive shaft shop 27 spline spool with bearings $300 shipped and paypaled

as topic says, looking for a 5.0 final drive and an lsd either oem or aftermarket. please let me know the prices ship to 33178 fl

Sold

found.

I have a wheel wobble/thunk after I hit 15mph. It gets worse as I go up. I'm so lost I have no idea what it is. So far I've literally replaced EVERYTHING. I replaced the intermediate shaft, axle, and the whole entire wheel hub with everything on it. And I only payed for the axle, the rest I got...

Hey guys so I have a 05 type s, 9x,xxx, oem flywheel and clutch just replaced my driver axle. So I've been having this clunking noise coming from my driver side and its driving me nuts. Trying to pinpoint what the problem is so I can figure out what I need to buy. When the car is jacked up in...

Hello I am wondering if there is a way to adjust the speedo on my 05 type s to the 4.3 final drive i installed. Maybe the 02-04 speed sensor will do the trick since they have the 4.3? I was boosted and had kpro but now bringing it back to stock except im keeping the 4.3 and wonder if theres...

So im from Canada and after a leaking Radiator i went on Kijij/Craigslist looking for a rad and found one for $90 used from a JDM parts store. Bought it cash and took it home only to place it against my OEM one and realise that the radiator cap goes on the right side along with the overfill...

So im from Canada and after a leaking Radiator i went on Kijij/Craigslist looking for a rad and found one for $90 used from a JDM parts store. Bought it cash and took it home only to place it against my OEM one and realise that the radiator cap goes on the right side along with the overfill...

2016 MVP Track Time Southeastern Schedule Good Day Fellow Track Junkies and Racers: Another fun year of exciting track action awaits for 2016. MVP Track Time (www.MVPTrackTime.com) is pleased to announce our 2016 track event schedule. I hope you’ll join us for the on-track fun. As...

2016 MVP Track Time Midwestern Schedule Good Day Fellow Flat-Landers: Another fun year of exciting track action awaits for 2016. MVP Track Time (www.MVPTrackTime.com) is pleased to announce our 2016 track event schedule. I hope you’ll join us for the on-track fun. As usual, we have...

2016 MVP Track Time Midwestern Schedule Good Day Fellow Flat-Landers: :D Another fun year of exciting track action awaits for 2016. MVP Track Time (www.MVPTrackTime.com) is pleased to announce our 2016 track event schedule. I hope you’ll join us for the on-track fun. As usual, we have...