Acura RSX, ILX and Honda EP3 Forum banner

Discussions Showcase Albums Media Media Comments Tags Marketplace

1-20 of 45 Results
  1. Member Show-Off RSX
    Hello everyone, had this project for a year now and was able to dyno it today. Custom short 3 inch cold air, auth hytech headers,custom 3 Inch exhaust and k pro. 158,xxx miles.
  2. Supercharging RSX
    I was just going to post this in the chat thread but the car made damn good power for the boost so I wanted to throw it here so people could see the build, give me pointers, etc... I finally got my car tuned. I kept the boost low (3.4" sc pulley/6.3 crank pulley) between 7-8 psi because I...
  3. Turbo RSX
    So I was very skeptical about email tuning but I went ahead with it. magnEsium here on the boards along with a great friend (also a great tuner) spend most of the day making the most power as possible. Although our day ended early (tranny plug backed itself out and lost all my fluid on the...
  4. Vehicles For Sale RSX
    ok.. just recently bought another car due to my work...so i gotta sell this now cus im paying too much insurance for three cars that i got.... i got a 02 RSX Type S k20a2 6spd,it has 133k but all highway i travel from costa mesa to riverside to work eryday just paid tags and smog this...
  5. Bolt-On Basics: RSX Type-S
    So i finally got my car dynoed at Innovative Motorworks in Carlisle PA by Derek aka D-rob. He did a great job and tuned me for 232.3whp/163.3tq. Mods are: AEM CAI RBC Hondata IMG Jackson Racing SS Race Header Test pipe w/ no cat Skunk 2 MegaPower 2.5" Catback And cant forget about KPRO hoping...
  6. All Motor EP3
    well, im back in the swing of things, and i was givin the chance to dyno my car for many runs as i wanted for little money, so i did it... my mods are: rsx type s DCRH, gutted box, intake manifold gasket, motor mount inserts, 2.5in custom bpipe w/ stock axel back...oh and kpro on the high...
  7. Bolt-On Basics: RSX Type-S
    Link to the vid http://www.youtube.com/watch?v=8PI-v-_3spQ Was expecting a bit more at least 210-215. The Air/Fuel is awesome. Got it street tuned by magnEsium :thumbsup: Mods: K Pro Buddy Club Spec 3 Exhaust Buddy Club Race Header Injen Cai RBC Intake Manifold Hondata IMG
  8. K-Series Swaps
    Well, my car is finally up and running! K24a2 with CAI/RH/E/KPRO/RBC/IMG/Exedy Clutch/ACT prolite. It was dynoed on a local dyno which is known to dyno about 7% lower than other local dynojets. My previous numbers on a different dyno were 181 hp and 130 ft-lbs tq. That was with Comptech...
  9. Supercharging RSX
    I just installed my jrsc and got it tuned, and i am pleased to say that i am very satisfied with the numbers. My numbers are 317hp and 217 lbft. remember this is flywheel horsepower, so its lower. I am currently on 9psi, and i already maxed out my injectors. I have 650cc's. any comments would...
  10. Turbo EP3
    Here is a dyno chart from a EP3 SI (K20A3) recently dyno'ed here in Guatemala on a DynoJet, the number here are a bit lower than in the US as we are at 5000 feet from sea level of altitude... Blue line is bone stock (NA) without the turbo kit and red line is with turbo kit at 9 psi and K-Pro:
  11. All Motor RSX
    Just came back from Church automotive. Thanks to Daniel and his amazing tuning. Keep in mind that Church dyno tends to read high. I was surprised I was able to pull some good numbers despite having a cat and the stock exhaust. I would definitely recommend blueprint stage 2 cam (and tuned by a...
  12. Bolt-On Basics: RSX Type-S
    So I decided to have the car dynoed today. I was hoping to hit 180whp but fell a bit short. My best pull was 175. This was on a dynojet dyno. The guy told me he could smell the clutch burning so i'm assuming it's slipping causing me to lose power at the wheels. My mods are: -Comptech Icebox...
  13. Honda Civic Si: 06 & Up
    just wanted to share with u guys about my results. my goal was to see how the stock si ecu would react to aftermarket cams. my mods are as stated in the title: injen cai, dcrh, custom 2.5 exhaust and skunk2 stage 1 cams w/ skunk exh. cam gear (no hondata reflash) will be getting the reflash in...
  14. Turbo RSX
    so im here at AJP and i just got my dyno results. 221whp 236wtq i knew my car was running uber rich but i had no idea how bad it was until i hit the dyno today. my AF just shot down to the lowest the wideband would read (10.0) and pegged there thru the majority of the pulll :eek: :mad: . im...
  15. Bolt-On Basics: RSX Type-S
    Is there anyone with TB+IM spacers that has dynoed and seen results that are worthwhile. I know people used to use them alot in years passed and quite a few guys with the 06+ SI's use them(with positive dyno results 3-5whp). Just curious to get opinions and or results if anyone has them...
  16. All Motor RSX
    yesterday i went to the dyno "dynoyet" to get a baseline run with my current mods....motor>k20a....internal upgrades> sleeved with darton sleeves,eagle rods,hone and bore to 87mm,11.7:1 wiseco pistons....boltons>AEM pulleys,injen cai with a very dirty filter and hondata IMG ...no ITR intake...
  17. All Motor RSX
    Ok so here are the results of my dyno: If you notice on the upper right hand corner of the first graph (hp graph) you will notice my first run is kinda normal (red line) now the blue line, which represents every other run I had tonight is kind of wierd. It has this wave pettern all over and the...
  18. Member Show-Off RSX
    2002 Type S i/h/e 189whp 1st run 189whp 2nd run
  19. Bolt-On Basics: RSX Type-S
    A local shop had a dyno meet today. I decided to throw my car on the rollers just to get an idea of what it is pushing out. The only powermods are a Fujita CAI and Powergetter exhaust. 189.71 hp and 133.24 lb/ft of torque. I can't say I'm unhappy with those numbers, but what jumped out at me...
  20. Bolt-On Basics: RSX Type-S
    02 Type-S with 38K on it. Stock. 174.5/133.6 4th gear pull.
1-20 of 45 Results
Top