Search Results for ‘fab’

SOLD Shaved K Series Valve Cover, Custom ALL IN FAB Catch can & fittings; Los Angeles Went with a different set up. Oil cap NOT included. $500 picked up. Buyer pays for shipping. I accept PayPal or cash. Buyer pays PayPal fees. (310) 740-2039. Text preferred. Serious buyers only. Thanks for...

Selling a custom one off vertical mount intercooler with machined brackets. Has a Vibrant vanjen welded on pipe. Also selling my All In Fab centerfeed intake manifold, it's dipped in chrome and has ports on size for vacuum and other necessities. Opening on intake manifold is 74mm. I am also...

Selling my basically new precision 6262 turbo. It has been dipped in chrome and is basically brand new. Turbo itself is new just idled on my car. Has a elbow welded to run a vibrant clamps. $1,100 shipped for the turbo OBO!! I need this gone ASAP please!!

Ok so both are brand new never ran Cc Made and cover welded by Derek @ AIFab Valve cover powder coated by cns Fittings are -10 (4) and 1 -6 for the pcv on water pump $450 Obo for both plus shipping or fees etc Located in northern va/md border willing to meet up or ship I can send much better...

Looking to sell my FD2 CTR LSD complete with bearings, speed gear & ring gear bolts (ring gear will be removed prior to sale). Fits in all K-series manual transmissions. In mint condition w/ ONLY a little over 2500 miles on it. Upgrading to a Wavetrac LSD which is why I'm selling. LSD bought new...

This is a custom made aluminum ALL IN FAB coil pack cover that is polished. This was a custom piece done for my new setup but I got a new one done. $75 shipped for it. Also selling a black ITR dip stick. It's in good condition $15 shipped

Selling my white powder coated valve cover with custom All In Fab catch can setup. The catch can is polished. Also selling my custom All In Fab coil pack cover with a raised spade on it. It is also polished. Selling everything for $500 plus shipping.

First off want to thank the following people who helped me get the car to where its at now... Derek @ ALL IN Fab Anthony @ Encore Garage Mike @ K-Tuned Meguiars Without those guys this build wouldnt have gone smoothly. Derek whipped out my entire kit super quick and I always had perfect...

Selling my white powder coated valve cover with custom All In Fab catch can setup. The catch can is polished. Also selling my custom All In Fab coil pack cover with a raised spade on it. It is also polished. Selling everything for $500 plus shipping.

Selling my white powder coated valve cover with custom All In Fab catch can setup. The catch can is polished. Also selling my custom All In Fab coil pack cover with a raised spade on it. It is also polished. Selling everything for $500 plus shipping.

ALL IN FAB catch can with -10 bungs and two -6 bungs with a 1/8npt drain out at the bottom. first bung threads got ruined from polishing guy. But its a easy fix. I can have it fixed once I get a buyer for it. $250.00 shipped

Sold

I would like to thank everyone who has been following my build, progress, and DIY's for all of your support. I would also like to thank you all for your wonderful comments, your help, ideas, and opinions! Keep them coming! For those who are seeing my car for the first...

There is absolutely NOTHING wrong with this beautiful manifold. Reason Im selling it because Im going with a centerfeed to clear up IC piping issues Im having with my specific setup. This manifold uses a billet flange, 5 vacuum ports, -6an bung welded at the bottom for brake booster. Looking to...

I have tried many things to get my PLM header to make a good seal at the donut gasket. The compressed tinfoil gasket that came with it was a piece of shit and I threw it away. Seriously it looks PLM got a good deal on aluminum foil and pressed it into a mold. LOL. I purchased a Vibrant Gasket...

This intercooler was designed and welded by Derek @ ALL IN FAB. Intercooler is capable at 900HP. It has two 3 " Vibrant farrels welded on as well. Looking to get $650.00 shipped

I Saw not to long ago where people were having some trouble with this company. I couldn't find anything recent saying if anything was resovled or not.... If it hasn't would you reccomend the Synapse Manifold or the TD Autowerkes?

I ordered a mainfold from them 3 weeks ago they said it would take 2week to make so I called them 2 weeks later they said it was done and they would send the tracking number mon. Of this week (week 3 )I never got the info and know they stoped answering the phone for the past 5 days they have not...

Freddy Alexandria, VA $900 picked up for the pair 8.0/10 condition, one has bolster wear from getting out of the seat, no rips, stains, or tears... carbon kevlar has scuffs where the rails attach too... I may have a pair of super low rails for dc/eg available for $100, I have to find them...