Search Results for ‘figure’

I have a 02 type s with v4 kpro. I am having problems after i start it the car goes closed loop to sune befor the wideband starts to read and the car goes 7.4 something air fuel and the short turn goes -25. If you can figure out why its doing this and your fix fixes my problem ill paypal you 20...

I purchased my RSX Base in 2014 and just this past month one low beam went out and then the other..went to change the bulb and did not know I was dealing with an installed HID kit or some aftermarket kit? Sorry to be such a noob and a pain to ask this but my brain hurts from looking at so many...

Can anyone tell me what this part is? No one can seem to tell me all i know is now my car is idling to high like at a dead stop its at 1000rpms the tube itself is clogged and if i reattach it the car shuts off

So I'm trying to figure out the problem an would like to hear what you guys think it may be. So my base model rsx thermostat has been getting hot but the thing is it only gets hot when I'm stuck in traffic an it's not moving at all but when I flying through the streets going over 20 mph the...

Whats the distance from bottom of fender to the center cap on a stock 05-06 rsx? Reason i asked is because i dropped my car without measuring first and want tonfind out how low i dropped it. Thanks in advance

My 2003 rsx-s has a few problems with the idle. 1) it idles too high at cold start; maybe 2500. 2) every now and then in acceleration, the car hesitates or surges, feels like no throttle or lack of fuel. 3) normal idle is high and the throttle cables are fine. I replaced the tps not too long ago...

I bought a 2002 RSX BASE and it had a high fluctuating idle problem which was fixed by cleaning the IACV. The only thing is it still has a high idle which usually sticks at 2000 rpm. when i am driving and i hit a speed that matches the 2000 rpm the car jumps really bad untill i either slow down...

http://youtu.be/y7d5CFPOSRw?list=UUlzF1wdqaF7MgDFZJyS9tZQ The previous owner said it had a bad oil pump as oil light comes on while driving. Since purchased, I replaced the oil pump, oil pressure sensor, timing chain and chain tensioner and i've also changed the oil and checked oil level...

Ok so, my rear motor mount is broken and needs to be replaced so I just figured I would swap all of them out at the same time to make it even. I bought the Avid Racing tuner series mounts from corsport with the street level bushing inserts, it was a decent price and I don't really care if it's...

I removed the plastic engine cover over the injectors on my 2002 RSX-S and noticed that the connectors are different colours and they are poorly soldered into the wiring harness. I bought the car used from a Honda dealer and there were some minor mods: CAI, header. I've searched but can't...

Its the thing with blue tape on it. If anyone knows what it is called please help me out. Thanks.

Hey so after searching for about an hour and a half all the threads to do this seem to be gone. So what I want to figure out is which type s trany will bolt up to my 06 base with no modifications what so ever I want to just buy the trany and bolt it in Please help Oh and I will be selling my...

hello im fairly new to thr forums and glad to have joined i have a 2002 rsx type s with a po453 evap high voltage code. Need to clear code in order to pass smog none of the evap system has ever been tampered with... Will appreciate any help i can get thanks in advanced. ...

so here's my problem. I drove my car the night before and it ran perfect. Parked it and woke up the next day and all of a sudden the car is bogging like crazy from 3k upwards. When it hits vtec, it's almost like some one jamming on the brakes and then the rpms climb slowly after wards. The...

i changed my oil and transmission fluid today and when i turned my car on i got a CEL when i plug in my OBII scanner it reads DTC 01 I/M NO and when i go into the DTC it says FAULT 01 then N/A 01 and when i try to erase the code it tells me erase failed... any ideas guys?

so i tore down my k20a2 out of my 02 rsx and went to order rod,main, and thrust bearings but figured out they were color coded so another words how do i figure out which ones to get?? any help would be greatly appreciated

Guys forgive me as I can't for the world figure out how to upload the datalog on here. The best I can discribe is...TPS is at 1%...IGN bouncing between 6-8deg. RPms pretty steady at 750+ I did a datalog of my idle. The timing on my Low speed cam angle seems iffy. My idle is set to 750. Tables...