Acura RSX, ILX and Honda EP3 Forum banner

finished

  1. Exterior Mods RSX
    Sup yo, decided I'd post my progress and somewhat of a DIY/tip guide to make an exhaust tip heat shields for a bumper. I see quite a lot of people with burnt bumpers due to their exhaust tip. I haven't had any problems myself and I know the proper fix is to just hang the exhaust lower, but I...
  2. Problems & Solutions EP3
    Hi, I have a stock 2003 SIR hatch and there is an exhaust leak at the cat where it bolts to the rear pipe. The flange is rusted pretty heavily and I can't tighten the bolts or replace them without using heat which will almost definitely crack it. The cat and replacement exhaust from Honda are...
  3. Problems & Solutions RSX
    Hopefully some one can help, just finished installing an rbc on my 02 type s, when to take it for a test drive and as I was reversing, I put it inton1st but couldn't get it into 1st, then I remembered that when installing the injen cai, you gotta put it in 5th so I figured that was the problem...
  4. Bolt-On Basics: RSX Type-S
    My daily/beater was getting rather boring to drive and had developed a small exhaust leak. So I decided to build a quiet and cost effective bolt on setup to fix my exhaust leak and maybe gain some power. I went with a short ram intake, PLM header and the Yonaka 2.5" Apexi world sport rep...
  5. Exterior Mods RSX
    Fabricated a brake light holder for the crv light that goes behind the Mugen rear lip. So far I got the holder and I'm working on keeping the light mounted in the holder. I saw somewhere someone did something similar with fiberglass but that's messy and annoying and itchy, Stay tuned for...
  6. Interior Mods RSX
    When I bought my car a few years ago. It had thrashed tan interior. I replaced everything inside with all black and type r accents (steering wheel and door moldings) I got a set of black leathers for the front that I was happy with but I work for a seat manufacturer. One of our trim designers...
  7. Member Show-Off RSX
    This is my 06 MM now Custom Milano Red rsx base i know but cant complain. 110k miles purchased at 60k. Gift from pops so planning on keeping it forever as my dd and then garage car. Don't care if I'm wasting money on a base its my car. Mods: Custom 95 EG Milano Red Paint Job Authentic Js...
  8. Problems & Solutions RSX
    OK so turbo went on and tuned it. i had some other odds and ends to wrap up and now that everything is on im having a few minor problems. First thing is the guides i were using were not specific about the sensors.. i ended up forgetting about my intake air temperature sensor so its just...
  9. North East For Sale: Local Pick-Up
    I currently have a couple of MINT NEW LIKE PARTS FROM MY BUILD! They all have under a 1,000 miles on them and are mint, except for the carbon fiber hood which was bought used. 05-06 Fresh White Painted Full Muegen Type R Front Bumper Custom Yellow JDM BRAND NEW NEVER OPENED Fog Lights That...
  10. Problems & Solutions RSX
    I'll start off by saying thanks to everyone that provided the vast majority of information I've found on these message boards. Up until about a month ago I knew about as much about cars as the 40 year old virgin knows about vagina. IE I heard people talk about doing great things to them... just...
  11. All Motor RSX
    :shakehead Alright guys, Ive been having a build in the making for the past few months now. Today marked the day the shop finally finished and got her started up. But then it leaves me on the side of the highway. Modifications include: BrianCrower 2.38 stroker kit (yaaa... About that...) CP...
  12. Problems & Solutions RSX
    Im pretty confident everything is put back the way it was but now when i start it it is going crazy. It goes up to 1500 rpm for a couple seconds then it shoot up to 2000 then drops then back up and so on. What did I F up?
  13. Want To Buy or Trade RSX
    I have a beautiful set of wheels I'm looking to trade for some gold BBS LM's with polished lips 17x9 plus cash on your end. I'll let the pictures speak for themselves... How it looked like on my car They are 17x9.5/10.5 +28/+22 with Falken tires.
  14. Member Show-Off RSX
    decided it was time to start rebuilding the car, piked up the car last year for 6000 leme know what you think. a few weeks ago i went to the mall, when i came out i saw this. figured this was a sign from above to rebuild so i picked up some sanding paper and got cracking. got rid of...
  15. Member Show-Off RSX
    cauQazn's DSM RSX & AW E92 M3 / IG: @visionautoworks / New front bumper in progress Page 66 -- Import Alliance Spring Meet (Atlanta) Page 65 -- HDAY @ ZMAX (Charlotte) Page 60-62 -- Jewel Eye Retrofit (RLX), new Titanium wingstands, J's Racing sides, Import Alliance ATL Page 58 -- HIN...
  16. Problems & Solutions RSX
    went to get my valves adjusted this week and i saw that my exhaust cam had no more lobes on it. so now im trying to find new cams but i dont know what to get, theres so many mixed reviews. also i dont have alot of money to spend so i dont want to spend money on valvetrain. what id like to know...
  17. Wheels & Tires
    Just scooped a set of gp's locally for a outstanding deal. The reason I got them so cheap is because some retard spray painted them black. I will be dropping these off for a full refinish to clean up the rough lips and re-powder coat them. Looking for some good ideas on what color I should...
  18. Exterior Mods RSX
    just wanted to say thanks to todd and the retrofit source for supplying me with all the crap I needed to do my headlights THESE WERE BRAND NEW HEADLIGHTS STRAIGHT OUT OF THE BOX THAT I THEN RETROFITTED I HAVE TSX PROJECTORS ON THE OUTSIDE AND BI-XENON PROJECTORS ON THE INSIDE EVERYTHING WORKS...
  19. Lighting RSX
    just wanted to say thanks to todd and the retrofit source for supplying me with all the crap I needed to do my headlights THESE WERE BRAND NEW HEADLIGHTS STRAIGHT OUT OF THE BOX THAT I THEN RETROFITTED I HAVE TSX PROJECTORS ON THE OUTSIDE AND BI-XENON PROJECTORS ON THE INSIDE EVERYTHING WORKS...
Top