fitment

Hi, would a Magnaflow performance catback fit with my PLM Race Header? I will provide links below. If anyone could help out I would appreciate it a lot! Magnaflow - https://www.carid.com/2002-acura-rsx-exhaust-systems/magnaflow-direct-fit-catalytic-converters-380735260.html PLM Race Header -...

So I want to order some ESR SR08 rims, 17x9.5 +20/ can I go wider rims in the back or will anything bigger than 9.5 look dumb. I want my fitment flush. Tires: nitto neogen 215/45 Coilovers: bc racing My question is, if I was to get wilwood front calipers would the rims rub against the calipers...

Is there anyone on here running the KTuned Billet Race Spec shifter setup? My Type R center console kinda restricts it from going into reverse, and the OEM 05-06 center console doesn’t let it go into reverse at all. Any tips? I’ve been rolling without a center console at the moment.

I have read most of the exhaust problem threads. Whenever more than 1 person ( myself ) is in my car , I get exhaust vibrations from under front seat of car. I put radiator hose cutouts and zip ties around rear exhaust hangar and around rear sway bar to pad and silence exhaust slap. But when I...

Quick question regarding the ITR dead pedal fitment Once installed, it appears the pedal is slightly larger than the base under from where the stock one sits. The top of the pedal overhangs and, when you put your hand behind it isn't sitting perfectly in place of where the old one was From...

So I know that the Brembo ITR swap has been covered millions of times, but I recently purchased my own set just to find out I have fitment problems... So since when I searched this thing looking for answers for all of the questions i had. I didn't see anything about my problem, decided I would...

What’s the best fitment on it , and tire size recommend on this .. ??

Would a 02-04 Mugen front bumper fit a 05-06 model?

Hello guys I wanted to know how a 17.9.5 with 15 offset will fit on a 02 rsx base With stock suspension and ride height

Hello guys I wanna know if some wheels 17x9.5 15 offset will fit on a 02 base rsx with stock suspension and ride height

So I've been reading and I couldn't find anything about fitting an intercooler with devsport splitter with the frame brackets. I was wondering if anyone has installed intercooler with the brackets I also wanna know if it's possible to keep fog lights.

Has anyone had to do any work to try to get the 05-06 cwest bumper on ? The bumper has about half an inch gap but seems like I'm missing a step to install it .. any suggestions would help :)

I have a 2004 Honda Civic Si Ep3 on raceland coilovers. It is at an inch and a half drop. I don't scrape terribly bad, to the point where the car doesn't get damaged at all. I'm look at some XXRs 530s. CarID suggests 17"x7" 5x114.3 bolt pattern 73.1mm Hub with a 35 offset. Tires they suggest is...

About to put on some new wheels but I want to ask if I should expect any problems. The wheels are 17x9 +22 Volk TE37 with 255/40/17 tires. Current car setup has coil overs and I have 2 finger gaps front and rear. The front has fender liners and rear fenders are rolled.

Wanted to know if it's possible to fit the Evo X MR seats into our RSX. What would be needed exactly if possible?

I apologize if this post triggers anyone. I have been searching and not many people have seem to roll with this setup; all the information I ever got was never really clear. I have a set of 18x9.5 +38 Rota Grids. Has anyone ever ran this setup? Any idea on how I can get these to fit? I have had...

I am considering purchasing the Private Label X Bar and im wondering if you can also run a rear strut bar and im wondering if any other rear braces will work with the x bar.

hello guys, i currently own a 2002 acura rsx base model and i just bought the hatch from an rsx-s. However, i am having a fitment issue not lining up quite right. I am using the same shocks from the base. I would like to know if anybody else has experienced similar issues? or if these hatches...

About to buy a set of MB Battles off of a friend and was wondering about fitment. theyre 18x9.5 et15. i searched with no results and i checked the fitment list in this thread and didnt see this size. so im wondering what ill have to do to make them fit, do i need to roll my fenders or buy a...

Has anyone ever done this? I can get a nice vibrant 4-2-1 off of FG2 locally for only $100 and I would like to see if it will clear subframe and firewall..I'm not worried about modding the midpipe..from what I read, people fit dc5 headers in their FG2/FA5s but I couldn't info on viceversa..