Acura RSX, ILX and Honda EP3 Forum banner

fitting

  1. Problems & Solutions RSX
    So I installed the has port 62a motor mounts today and the bolt that connects to the motor doesn't fit anymore . Is there any other bolt I can install ? Please help.
  2. Supercharging RSX
    Looking for any info on a new setup. Been wanting to go FI for a while now and am currently saving $$$ to do just that. I have an 06 DC5 with a full K24a2 swap in it currently. I really want a rotrex supercharger for the reliability and bigger numbers than most other SC kits, but my DC5 is my DD...
  3. Engine & Transmission RSX
    never seen fuel, just mounted has minor scratches on back from mounting (see picture 4) this is for rsx and ep3 so it has efi fitting and no an fittings, only whats pictured-nothing more $100 shipped and paypald in 48 states (1) Hybrid Racing K-Series Fuel Rail (1) 1/8 NPT Fitting (2) -8 ORB...
  4. The DIY Garage RSX
    Hi guys I'm new here from across the pond all the way from London, UK. I have an n/a tuned Japanese import DC5 Integra Type R. I've had the Bee*R limiter Type H2 shipped over from nengun performance japan a couple weeks ago specifically made for the DC5R but still havn't fitted it. Most of my...
  5. Problems & Solutions RSX
    Hi peope! I need some help, today my car was hit by a cab driver and when I got home I saw this, the tube that connects the hose from the radiator to the reservoir tank is broken, I know this is not good for performance, my radiator is zap I know is cheap but it is well made I got it 1 year ago...
  6. Want To Buy or Trade RSX
    ...
  7. Suspension, Chassis & Brakes
    So I have these coilovers I got slightly used and the person before drilled out the whole on the coilover that attaches to the tie rod end... It's suppose to be a tapered fitting but he drilled it out to a 5/8 hole and now when I go to tighten the nut back on it just spins... So does anyone know...
  8. Lighting EP3
    I recently bought some depos and I had a h1 hid kit for the low beams and when installing the headlights. the bulbs wouldn't fit. anyone else run into this problem? I have searched and it seems like no one mentions anything about this or having an issue. thanks.
  9. Suspension, Chassis & Brakes
    Does anybody know what the hardline brake fitting thread pitch is for an RSX/EP3? I bought a used wilwood bbk and the brake line adaptors have a different thread pitch than my brake line fittings. Does anybody know what they thread pitch is on these fittings or can possibly gauge the thread...
  10. Problems & Solutions RSX
    Why won't both of my side tabs go in place? I keep trying to place the tab on top of the bracket but also under the white plastic peace that helps the screw fit in. It's really hard to put it in, but even when I forced it in the front bumper and fender didn't line up correctly. Am I putting it...
  11. North East For Sale: Local Pick-Up
    I want to buy Ktuned fuel rail fitting/adapter for OEM fuel damper. It should have came with your fuel rail if you purchased it new from K-tuned.. If you're not using it and want to sell it, let me know. This is what I'm looking for: Thanks!
  12. Want to Buy or Trade EP3
    I want to buy Ktuned fuel rail fitting/adapter for OEM fuel damper. It should have came with your fuel rail if you purchased it new from K-tuned.. If you're not using it and want to sell it, let me know. This is what I'm looking for: Thanks!
  13. Want To Buy or Trade RSX
    I want to buy Ktuned fuel rail fitting/adapter for OEM fuel damper. It should have came with your fuel rail if you purchased it new from K-tuned.. If you're not using it and want to sell it, let me know. This is what I'm looking for: Thanks!
  14. Wheels & Tires
    Wondering if I'll run into issues while trying to fit my new bbs rx2's.Specs are 17 by 8 +35 offset and I'm looking at 25 mm adapters. I'm guessing with the 25 mm adapters it'd bring my offset to +10 correct? Idk what that's going to look like, but I'm going for more of a functional look rather...
  15. Exterior Mods RSX
    My car is a factory A-Spec, so it has the drilled on decklid wing versus the taped on like most people. I want to run the Mugen wing, and I understand the two don't combine. I'm hoping someone has found an easy way to modify something to make the two combine...
  16. Wheels & Tires
    Will 15mm studded spacers fit 17x9 +45 rpf1? I heard the stock studs stick out too far and people have to cut them to clear the back of the wheel.
  17. Engine & Transmission RSX
    sold
  18. Bolt-On Basics: RSX (Base)
    Hey i'm just wondering if a 2007 rsx front bumper will fit onto for 2002 rsx without any modifications
  19. Wheels & Tires
    Tried to put on my new Work Emotion CR Kai rims and I can't get them centered around the hub, with concentric rings or not. The holes that the bolts go through don't seem to be large enough to move the wheel around and center it. I've seen lots of people on here with these rims and haven't seen...
  20. Exterior Mods RSX
    I so had a little run in with a bush today and it decided it was going to take my OEM front bumper with it. I am in need of a new bumper now and was curious as to where I could find a OEM or OEM replica bumper that fits well. I have been checking the market section on these forums but wasn't...
Top